iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1374:2000

(Main)

Agricultural machinery - Silos stationary unloaders for round silos - Safety

Agricultural machinery - Silos stationary unloaders for round silos - Safety

This European standard specifies safety requirements for design and construction of unloaders mounted in stationary round silos for the removal of the silage and similar materials. It applies to electrically powered, slowly rotating unloaders which operate on top surface of the stored silage surface. It describes methods for the elimination or reduction of hazards for which specific requirements on unloaders as defined in 3 and shown in Annex B, are necessary. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices.

Landmaschinen - Stationäre Entnahmegeräte für Rundsilos - Sicherheit

Diese Europäische Norm enthält sicherheitstechnische Anforderungen für die Gestaltung und Konstruktion von Entnahmegeräten eingebaut in stationären Rundsilos für Gärfutter und ähnliche Materialien. Sie gilt für elektrisch angetriebene, oberhalb der Silagefläche angeordnete, langsam rotierende Entnahmegeräte. Sie beschreibt Maßnahmen zur Vermeidung oder Verminderung von Gefährdungen, für die spezifische Anforderungen an Entnahmegeräte entsprechend den Begriffen im Abschnitt 3 und Anhang B benötigt werden.

Matériel agricole - Désileuses stationnaires pour silos cylindriques - Sécurité

La présente Norme Européenne détermine les prescriptions de sécurité pour la conception et la construction des désileuses installées dans les silos cylindriques stationnaires pour le déplacement de l'ensilage et des matériaux similaires. Elle s'applique aux désileuses à rotation lente alimentées électriquement, qui travaillent au niveau de la surface supérieure de l'ensilage.

Kmetijski stroji - Vgrajeni odjemalniki za okrogle silose - Varnost

General Information

Status
Withdrawn
Publication Date
20-Jun-2000
Withdrawal Date
06-Apr-2010
ICS
65.040.20 - Buildings and installations for processing and storage of agricultural produce
Technical Committee
CEN/TC 144 - Tractors and machinery for agriculture and forestry
Drafting Committee
CEN/TC 144/WG 5 - Stationary equipment
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
07-Apr-2010
Completion Date
07-Apr-2010
Directive
98/37/EC - Machinery
Mandate
M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
Ref Project
SIST EN 1374:2001 - Agricultural machinery - Silos stationary unloaders for round silos - Safety

Relations

Merged Into
EN 1374:2000+A1:2010 - Agricultural machinery - Silos stationary unloaders for round silos - Safety
Effective Date
30-Jan-2010
Corrected By
EN 1374:2000/AC:2004 - Agricultural machinery - Silos stationary unloaders for round silos - Safety
Effective Date
22-Dec-2008

Buy Standard

EN 1374:2001EN 1374:2001
PreviousNext
Standard
EN 1374:2001
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1374:2001
01-december-2001
Kmetijski stroji - Vgrajeni odjemalniki za okrogle silose - Varnost
Agricultural machinery - Silos stationary unloaders for round silos - Safety
Landmaschinen - Stationäre Entnahmegeräte für Rundsilos - Sicherheit
Matériel agricole - Désileuses stationnaires pour silos cylindriques - Sécurité
Ta slovenski standard je istoveten z: EN 1374:2000
ICS:
65.040.20 3RVORSMDLQQDSUDYH]D Buildings and installations for
SUHGHODYRLQVNODGLãþHQMH processing and storage of
NPHWLMVNLKSULGHONRY agricultural produce
SIST EN 1374:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1374:2001

---------------------- Page: 2 ----------------------

SIST EN 1374:2001

---------------------- Page: 3 ----------------------

SIST EN 1374:2001

---------------------- Page: 4 ----------------------

SIST EN 1374:2001

---------------------- Page: 5 ----------------------

SIST EN 1374:2001

---------------------- Page: 6 ----------------------

SIST EN 1374:2001

---------------------- Page: 7 ----------------------

SIST EN 1374:2001

---------------------- Page: 8 ------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 1374:2000+A1:2010(Main)
Agricultural machinery - Silos stationary unloaders for round silos - Safety
SIST EN 1374:2001+A1:2010

This European Standard specifies safety requirements for the design and construction of unloaders mounted in stationary round silos for the removal of the silage and similar materials. It applies to electrically powered, slowly rotating unloaders which operate on top surface of the stored silage surface.
It describes methods for the elimination or reduction of hazards for which specific requirements on unloaders, as defined in 3 and shown in Annex B, are necessary. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices.
The document only deals with the hazards generated by the silo unloader and not with those of the silo system itself (e.g. hazards arising from generated gases).
This document is not applicable to noise and fire hazards and hazards related to the foreseeable misuse.
The document does not deal with technical requirements for installation or removal of the unloader from one silo to another.
The list of significant hazards dealt with in this document is given in annex A. Annex A also indicates the hazards which have not been dealt with.
The environmental aspects have not been considered in this document.
This document applies primarily to machines which are manufactured after the date of issue of this document.
NOTE   Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present document is not intended to provide means of complying with the essential health and safety requirements of Directive 94/9/EC.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13207:2018(Main)
Plastics - Thermoplastic silage films and tubes for use in agriculture
SIST EN 13207:2018

This European Standard specifies the requirements related to dimensional, mechanical and optical characteristics of thermoplastic films and tubes used during the manufacture of silage and designed to last at least one year for protecting fodder.
It specifies a classification for the durability of silage films and the test methods referred to in this standard.
This European Standard is applicable to transparent, black, white or coloured (e.g. black/white) thermoplastic silage films based on polyethylene, ethylene copolymer, EVOH and polyamide.
These films are intended for covering bunker silos, silage tubes or silage clamps for preserving forage. They protect the forage and preserve it from rain and air. These films are not intended to cover bales piles (e.g. straw bales and hay bales).
Silage films obtained by sealing two or more films in machine direction are out of the scope of this document.
This European Standard also defines installation, use and removal conditions of silage films. It defines the conventional useful lifetime, as well as rules that allow evaluating the remaining use potential in the event of a failure before the normal end-of-use date.
NOTE   These rules allow estimating the residual value of the films. These provisions only apply to the film itself and the damage it has undergone. Any other problem falls within the scope of professional practices and the general terms and conditions of sale.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1993-4-1:2007/A1:2017(Amendment)
Eurocode 3 - Design of steel structures - Part 4-1: Silos
SIST EN 1993-4-1:2007/A1:2017

DOP of 12 months! * 2017-03-22 FJD - No xml version as mother version was not originally published as xml.

  • Amendment
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1374:2000+A1:2010(Main)
Agricultural machinery - Silos stationary unloaders for round silos - Safety
SIST EN 1374:2001+A1:2010

This European Standard specifies safety requirements for the design and construction of unloaders mounted in stationary round silos for the removal of the silage and similar materials. It applies to electrically powered, slowly rotating unloaders which operate on top surface of the stored silage surface.
It describes methods for the elimination or reduction of hazards for which specific requirements on unloaders, as defined in 3 and shown in Annex B, are necessary. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices.
The document only deals with the hazards generated by the silo unloader and not with those of the silo system itself (e.g. hazards arising from generated gases).
This document is not applicable to noise and fire hazards and hazards related to the foreseeable misuse.
The document does not deal with technical requirements for installation or removal of the unloader from one silo to another.
The list of significant hazards dealt with in this document is given in annex A. Annex A also indicates the hazards which have not been dealt with.
The environmental aspects have not been considered in this document.
This document applies primarily to machines which are manufactured after the date of issue of this document.
NOTE   Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present document is not intended to provide means of complying with the essential health and safety requirements of Directive 94/9/EC.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1993-4-1:2007/AC:2009(Corrigendum)
Eurocode 3 - Design of steel structures - Part 4-1: Silos
SIST EN 1993-4-1:2007/AC:2009

TC - Modifications in Foreword, Clauses 1, 2, 4, 5, 6, 8 and 9 and Annex A in the E mother reference version.
2013: Originator of XML version: first setup pilot of CCMC in 2012

  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1993-4-1:2007(Main)
Eurocode 3 - Design of steel structures - Part 4-1: Silos
SIST EN 1993-4-1:2007

Complementary to Part 1. Varied general rules and additional detailed rules for the structural design of free standing or supported steel silos of circular or rectangular plan for storing bulk granular solids.

  • Standard
    114 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
FprEN 17657(Main)
Equipments for slaughterhouses - Slaughtering traps for bovine animals - Safety and cleaning requirements
oSIST prEN 17657:2022

This document specifies the safety and hygiene requirements applicable to slaughtering traps intended for bovine animals and equidae such as defined in Clause 3.
These requirements take into account hazards that may arise from the transport, mounting, adjustment, maintenance and use of these slaughtering traps.
NOTE   This document takes into account the protection of animals at the time of killing.
The machinery or installations covered by this document are intended to facilitate the slaughter of bovine animals or equidae that weigh between 100 kg and 1 200 kg. They are either rotating slaughtering traps or fixed slaughtering traps.
This document does not cover the following machinery and zones:
-   "restrainers": systems for holding and conveying via conveyor belts;
-   slaughtering traps with a side door that opens under the weight of the animal alone;
-   slaughtering traps where the only source of energy is manual effort.
This document does not cover the following essential requirements of Machinery Directive:
-   safety and reliability of control systems;
-   control devices;
-   failure of the power supply;
-   isolation of energy source.
The list of significant hazards is given in the informative Annex C.

  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1993-4-1:2007/A1:2015(Amendment)
Eurocode 3 - Design of steel structures - Part 4-1: Silos
SIST EN 1993-4-1:2007/kFprA1:2014

- Corrugated silos with vertical stiffeners
- Axially stiffened silos with isotropic walls
- Hopper buckling and transition junctions
- Anchorage and wind pressure combinations
- Internal ties in rectangular silos
- Elephant’s foot buckling and restrictions on all silos

  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3525:2023(Main)
Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Plates - 6 mm ≤ a ≤ 20 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa
oSIST prEN 3525:2021

This document specifies the requirements relating to:
Steel 15CrMoV6 (1.7334)
Air melted
Hardened and tempered
Plates
6 mm ≤ a ≤ 20 mm
1 080 MPa ≤ Rm ≤ 1 280 MPa
for aerospace applications.
W.nr: 1.7334.
ASD-STAN designation: FE-PL1505.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3524:2023(Main)
Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Sheets and strips - 2 mm ≤ a ≤ 6 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa
oSIST prEN 3524:2021

This document specifies the requirements relating to:
Steel 15CrMoV6 (1.7334)
Air melted
Hardened and tempered
Sheets and strips
2 mm ≤ a ≤ 6 mm
1 080 MPa ≤ Rm ≤ 1 280 MPa
for aerospace applications.
W.nr: 1.7334.
ASD-STAN designation: FE-PL1505.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day