Diving suits - Part 1: Wet suits - Requirements and test methods

This document specifies the construction and performance requirements (including thermal) of wet suits for wear by divers for underwater activities where the user is breathing underwater. Marking, labelling, information to be provided at the point of sale, and instructions for use are also specified.
Laboratory and practical performance tests are specified.
Short sleeve jackets, short-leg trousers, under and over-garments, and separate accessories such as gloves, hoods and boots are not within the scope of this document.

Tauchanzüge - Teil 1: Nasstauchanzüge - Anforderungen und Prüfverfahren

Dieses Dokument legt die Konstruktion und die Anforderungen an die Leistungsfähigkeit (einschließlich der thermi-
schen Leistung) von Nasstauchanzügen fest, die von Tauchern bei Tätigkeiten unter Wasser zu tragen sind, bei
denen der Benutzer unter Wasser atmet. Kennzeichnung, Etikettierung, mitzuliefernde Informationen beim Verkauf
und eine Gebrauchsanweisung werden auch festgelegt.
Es werden Laborprüfungen und praktische Leistungsprüfungen festgelegt.
Kurzarmjacken, kurze Hosen, Unter- und Überziehkleidung sowie separate Zubehörteile wie Handschuhe, Hauben
und Stiefel sind nicht Bestandteil dieses Dokuments.

Vêtements de plongée - Combinaisons isothermes - Partie 1: Exigences et méthodes d'essai

Potapljaške obleke – 1. del: Mokre obleke – Zahteve in preskusne metode

General Information

Status
Withdrawn
Publication Date
29-Mar-2005
Withdrawal Date
05-Dec-2017
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
06-Dec-2017

Relations

Buy Standard

Standard
EN 14225-1:2005
English language
26 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Diving suits - Part 1: Wet suits - Requirements and test methodsPotapljaške obleke – 1. del: Mokre obleke – Zahteve in preskusne metodeVetements de plongée - Combinaisons isothermes - Partie 1:
Exigences et méthodes d'essaiTauchanzüge - Teil 1: Nasstauchanzüge - Anforderungen und Prüfverfahren97.220.40Oprema za športe na prostem in vodne športeOutdoor and water sports equipmentICS:SIST EN 14225-1:2005enTa slovenski standard je istoveten z:EN 14225-1:200501-julij-2005SIST EN 14225-1:2005SLOVENSKI
STANDARD







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14225-1March 2005ICS 97.220.40English versionDiving suits - Part 1: Wet suits - Requirements and test methodsVêtements de plongée - Partie 1: Combinaisonsisothermes - Exigences et méthodes d'essaiTauchanzüge - Teil 1: Nasstauchanzüge - Anforderungenund PrüfverfahrenThis European Standard was approved by CEN on 14 February 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14225-1:2005: E



EN 14225-1:2005 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Requirements.6 4.1 Mechanical performance.6 4.2 Limitation of water flow into and out of the suit.7 4.3 Thermal performance of suit materials.7 4.4 Sizing.8 4.5 Practical performance.8 5 Test methods.8 5.1 General.8 5.2 Test sequence.9 5.3 Visual Inspection.10 5.4 Mechanical test methods.11 5.5 Practical performance test.12 6 Marking.15 7 Inform
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.