EN 12927-8:2004

Safety requirements for cableway installations designed to carry persons - Ropes - Part 8: Magnetic rope testing (MRT)

This part of EN 12927 specifies the minimum requirements of MRT equipment and procedures for use in the examination of steel wire ropes used on cableways for passenger transport.
Performance requirements and testing of MRT equipment and qualification of personnel engaged in carrying out MRT are also included.
This part of EN 12927 does not include requirements relating to the protection of workers.

Sicherheitsanforderungen für Seilbahnen für den Personenverkehr - Seile - Teil 8: Magnetische Seilprüfung (MRT)

Das Ziel dieser europäischen Norm ist die Festlegung von Anforderungen an magnetische Prüfgeräte für im Personentransport eingesetzte Seile. Diese Anforderungen müssen unter Berücksichtigung der unterschiedlichen Seilarten und ihren Funktionen erfüllt werden. Sie umfaßt die allgemeinen Anforderungen an Prüfgeräte und ihren Einsatz bei der Prüfung aller Seilarten, die bei Seilbahnen für den Personenverkehr benutzt werden. Die Norm enthält die Leistungskriterien der Geräte, Prüfmethoden (Typprüfung und Herstellung) und Qualifikationsanforderungen an das Personal.

Prescriptions de sécurité pour les installations à câbles transportant des personnes - Câbles - Partie 8 : Contrôles non-destructifs par contrôle électromagnétique

La présente partie de l'EN 12927 spécifie les prescriptions minimales relatives aux équipements de contrôle électromagnétique et aux modes opératoires à suivre lors du contrôle des câbles en acier utilisés dans les les installations à câbles transportant des personnes.
Les prescriptions de performance et les essais des équipements de contrôle électromagnétique  ainsi que la qualification du personnel chargé de la réalisation des contrôles électromagnétiques  entrent également dans son domaine d'application.
Les prescriptions relatives à la protection des travailleurs ne sont pas prévues dans la présente partie de l'EN 12927.

Varnostne zahteve za žičniške naprave za prevoz oseb – Vrvi – 8. del: Pregledi vrvi z magnetno induktivno metodo

General Information

• Status: Withdrawn
• Publication Date: 19-Oct-2004
• Withdrawal Date: 14-May-2019
• ICS: 45.100 - Cableway equipment
• Technical Committee: CEN/TC 242 - Safety requirements for passenger transportation by rope
• Drafting Committee: CEN/TC 242/WG 3 - Ropes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 15-May-2019
• Directive: 00/9/EC - Cableway installations designed to carry persons
• Directive: 2000/9/EC - Directive 2000/9/EC of the European Parliament and of the Council of 20 March 2000 relating to cableway installations designed to carry persons
• Directive: 2016/424 - Regulation (EU) 2016/424 of the European Parliament and of the Council of 9 March 2016 on cableway installations and repealing Directive 2000/9/EC
• Mandate: M/300 - Mandate for standardisation addressed to CEN, CENELEC and ETSI in the field of Cableway installations designed to carry persons
• Ref Project: SIST EN 12927-8:2005 - Safety requirements for cableway installations designed to carry persons - Ropes - Part 8: Magnetic rope testing (MRT)

Relations

• Replaced By: EN 12927:2019 - Safety requirements for cableway installations designed to carry persons - Ropes
• Effective Date: 22-May-2019
• Revised: prEN 12927 - Safety requirements for cableway installations designed to carry persons - Ropes
• Effective Date: 19-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Safety requirements for cableway installations designed to carry persons - Ropes - Part 8: Magnetic rope testing (MRT)Prescriptions de sécurité pour les installations a câbles transportant des personnes - Câbles - Partie 8 : Contrôles non-destructifs par contrôle électromagnétiqueSicherheitsanforderungen für Seilbahnen für den Personenverkehr - Seile - Teil 8: Magnetische Seilprüfung (MRT)Ta slovenski standard je istoveten z:EN 12927-8:2004SIST EN 12927-8:2005en45.100Cableway equipmentICS:SLOVENSKI
STANDARDSIST EN 12927-8:200501-januar-2005

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12927-8October 2004ICS 45.100English versionSafety requirements for cableway installations designed to carrypersons - Ropes - Part 8: Magnetic rope testing (MRT)Prescriptions de sécurité pour les installations à câblestransportant des personnes - Câbles - Partie 8 : Contrôlesnon-destructifs par contrôle électromagnétiqueSicherheitsanforderungen für Seilbahnen undSchleppaufzüge des Personenverkehrs - Seile - Teil 8:Zerstörungsfreie PrüfungenThis European Standard was approved by CEN on 23 August 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12927-8:2004: E

Relationship between this European Standard and the Essential Requirements of EU Directive 2000/9/EC relating to cableway installations designed to carry persons.16

- Terminology 2) Safety requirements for cableway installations designed to carry persons
- General requirements 3) Safety requirements for cableway installations designed to carry persons
- Calculations 4) Safety requirements for cableway installations designed to carry persons
- Ropes 5) Safety requirements for cableway installations designed to carry persons
- Tensioning devices 6) Safety requirements for cableway installations designed to carry persons
- Drive systems and other mechanical equipment 7) Safety requirements for cableway installations designed to carry persons
- Carriers 8) Safety requirements for cableway installations designed to carry persons
- Electrical equipment other than for drive systems

- Civil engineering works 10) Safety requirements for cableway installations designed to carry persons
- Pre-commissioning inspection, maintenance and operational inspection and checks 11) Safety requirements for cableway installations designed to carry persons
- Recovery and evacuation 12) Safety requirements for cableway installations designed to carry persons
- Operation 13) Safety requirements for cableway installations designed to carry persons
- Quality assurance Together these form a series of standards regarding design, manufacture, production, maintenance and operation of all installations for passenger transportation by rope. In respect of ski-tows the drafting of this European Standard has been guided by the works of the International Organisation for transportation by rope (OITAF). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

1 Scope This part of EN 12927 specifies the minimum requirements of MRT equipment and procedures for use in the examination of steel wire ropes used on cableways for passenger transport. Performance requirements and testing of MRT equipment and qualification of personnel engaged in carrying out MRT are also included. This part of EN 12927 does not include requirements relating to the protection of workers. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 1709 Safety requirements for cableway installations designed to carry persons - Precommissioning inspection, maintenance, operational inspection and checks prEN 1907:2004, Safety requirements for cableway installations designed to carry persons – Terminology. EN 12385-2:2002, Steel wire ropes - Safety - Part 2: Definitions, designation and classification. EN 12927-6, Safety requirements for cableway installations designed to carry persons
- Ropes - Part 6: Discard criteria. EN 12929-1, Safety requirements for cableway installations designed to carry persons - General requirements - Part 1: Requirements for all installations.

nominal rope diameter
The rope acts as the transformer core. The primary coil is energised with low frequency alternative current, typically in the 10-to-30-hertz range. The secondary coil measures the magnetisation o
...