EN ISO 22041:2019/A1:2019
(Amendment)Refrigerated storage cabinets and counters for professional use - Performance and energy consumption (ISO 22041:2019)
Refrigerated storage cabinets and counters for professional use - Performance and energy consumption (ISO 22041:2019)
Lagerkühlmöbel und -theken für den gewerblichen Gebrauch - Leistung und Energieaufnahme (ISO 22041:2019)
Armoires et comptoirs frigorifiques de stockage destinés à un usage professionnel - Performances et consommation d'énergie (ISO 22041:2019)
Hladilne omare in pulti za profesionalno uporabo - Zmogljivost in poraba energije - Dopolnilo A1 (ISO 22041:2019)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2020
Hladilne omare in pulti za profesionalno uporabo - Zmogljivost in poraba energije -
Dopolnilo A1 (ISO 22041:2019)
Refrigerated storage cabinets and counters for professional use - Performance and
energy consumption (ISO 22041:2019)
Servicekühltheken- und -tische für den gewerblichen Gebrauch - Leistung und
Energieaufnahme (ISO 22041:2019)
Armoires et comptoirs frigorifiques de stockage destinés à un usage professionnel -
Performances et consommation d'énergie (ISO 22041:2019)
Ta slovenski standard je istoveten z: EN ISO 22041:2019/A1:2019
ICS:
27.015 Energijska učinkovitost. Energy efficiency. Energy
Ohranjanje energije na conservation in general
splošno
97.130.20 Hladilne naprave za trgovine Commercial refrigerating
appliances
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 22041:2019/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2019
EUROPÄISCHE NORM
ICS 97.130.20
English Version
Refrigerated storage cabinets and counters for
professional use - Performance and energy consumption
(ISO 22041:2019)
Armoires et comptoirs frigorifiques de stockage Servicekühltheken- und -tische für den gewerblichen
destinés à un usage professionnel - Performances et Gebrauch - Leistung und Energieaufnahme (ISO
consommation d'énergie (ISO 22041:2019) 22041:2019)
This amendment A1 modifies the European Standard EN ISO 22041:2019; it was approved by CEN on 9 October 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22041:2019/A1:2019 E
worldwide for CEN national Members.
European foreword
This document (EN ISO 22041:2019/A1:2019) has been prepared by Technical Committee CEN/TC 44
“Commercial and Professional Refrigerating Appliances and Systems, Performance and Energy
Consumption” the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2020, and conflicting national standards shall be
withdrawn at the latest by May 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
1 Modification to the Foreword
Add the following two paragraphs:
“This document has been prepared under a mandate given to CEN by the European Commission and the
European Fr
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.