EN 1071-10:2009
(Main)Advanced technical ceramics - Methods of test for ceramic coatings - Part 10: Determination of coating thickness by cross sectioning
Advanced technical ceramics - Methods of test for ceramic coatings - Part 10: Determination of coating thickness by cross sectioning
This document specifies a method of measuring the thickness of ceramic coatings by means of examination of a metallographically prepared cross-section of the coating in a calibrated optical or scanning electron microscope. It draws strongly on EN ISO 9220 [8], modifying and updating as required to be relevant to ceramic coatings and current best practice.
Hochleistungskeramik - Verfahren zur Prüfung keramischer Schichten - Teil 10: Bestimmung der Schichtdicke mittels Querschliff
Dieses Dokument legt ein Messverfahren für die Schichtdicke keramischer Beschichtungen fest, bei dem ein metallographisch angefertigter Querschliff der Beschichtung mit einem kalibrierten Licht- oder Rasterelektro-nenmikroskop untersucht wird. Es lehnt sich eng an EN ISO 9220 [8] an, jedoch wurden alle erforderlichen Anpassungen und Aktualisierungen vorgenommen, um keramischen Beschichtungen und der derzeitig besten Praxis zu entsprechen.
Céramiques techniques avancées - Méthodes d'essai pour les revêtements céramiques - Partie 10: Détermination de l'épaisseur du revêtement par découpage transverse
Le présent document définit une méthode de mesurage de l’épaisseur des revêtements céramiques qui
comprend l’examen au microscope optique ou électronique à balayage étalonné d’une section transversale du
revêtement ayant fait l’objet d’une préparation métallographique. Il est largement inspiré du document
EN ISO 9220 [8], mais a été modifié et mis à jour conformément aux exigences pour être adapté aux
revêtements céramiques et aux bonnes pratiques actuelles.
Sodobna tehnična keramika - Metode za preskušanje keramičnih prevlek - 10. del: Ugotavljanje debeline prevleke s prečnim prerezom
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hochleistungskeramik - Verfahren zur Prüfung keramischer Schichten - Teil 10: Bestimmung der Schichtdicke mittels QuerschliffCéramiques techniques avancées - Méthodes d'essai pour les revêtements céramiques - Partie 10: Détermination de l'épaisseur du revêtement par découpage transverseAdvanced technical ceramics - Methods of test for ceramic coatings - Part 10: Determination of coating thickness by cross sectioning81.060.30Sodobna keramikaAdvanced ceramics25.220.99Druge obdelave in prevlekeOther treatments and coatingsICS:Ta slovenski standard je istoveten z:EN 1071-10:2009SIST EN 1071-10:2009en,fr,de01-november-2009SIST EN 1071-10:2009SLOVENSKI
STANDARDSIST-TS CEN/TS 1071-10:20051DGRPHãþD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1071-10July 2009ICS 81.060.30Supersedes CEN/TS 1071-10:2004
English VersionAdvanced technical ceramics - Methods of test for ceramiccoatings - Part 10: Determination of coating thickness by crosssectioningCéramiques techniques avancées - Méthodes d'essai pourles revêtements céramiques - Partie 10: Détermination del'épaisseur du revêtement par découpage transverseHochleistungskeramik - Verfahren zur Prüfung keramischerSchichten - Teil 10: Bestimmung der Schichtdicke mittelsQuerschliffThis European Standard was approved by CEN on 19 June 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1071-10:2009: ESIST EN 1071-10:2009
General guidance on the preparation and measurement of cross-sections . 13 A.1 Introduction . 13 A.2 Cutting . 13 A.3 Mounting . 13 A.4 Grinding and polishing . 14 A.5 Use of the scanning electron microscope. 14 Bibliography . 15 SIST EN 1071-10:2009
1) In preparation at the time of publication of this European Standard. SIST EN 1071-10:2009
5.1 Scanning electron microscope (SEM) The SEM shall have a spatial resolution of 50 nm or better. Suitable instruments are available commercially. 5.2 Optical microscope The optical microscope shall have a spatial resolution of 500 nm or better. Suitable instruments are available commercially.
NOTE 1 Microscopes that incorporate a system to automatically record the XY coordinates are available and, if the stage movement has been calibrated, can be used directly to measure coating thickness without the need SIST EN 1071-10:2009
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.