prEN 6050

Aerospace series - Pin, close tolerance, swage locking, 100° countersunk reduced head, shear type, in aluminium alloy 7050, conversion coating - Inch series

Luft- und Raumfahrt - Passniete für Quetschverriegelung mit reduziertem Senkkopf 100°, für Scherbeanspruchung, aus Aluminiumlegierung 7050, Schmierfilm behandelt - Zoll-Reihe

Série aérospatiale - Rivet de précision, à bague sertie, à tête fraisée 100° réduite, type cisaillement, en alliage d’aluminium 7050, revêtement de conversion - Série en inches

Le présent document spécifie les caractéristiques des rivets de précision, à bague sertie, à tête fraisée 100° réduite, type cisaillement, en alliage d’aluminium 7050-T73, à film sec, série en inches, avec une température maximale d'utilisation de 80 °C pour les applications aérospatiales.

Aeronavtika - Zatič, ozka toleranca, pritrdilni, 100° ugrezna glava, strižni tip, iz aluminijeve zlitine 7050, prevleke - Palčne mere

General Information

• Status: Not Published
• Publication Date: 15-Sep-2024
• ICS: 49.030.60 - Rivets
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3/S 2 - Fasteners
• Current Stage: 4060 - Closure of enquiry - Enquiry
• Start Date: 08-Jun-2023
• Completion Date: 08-Jun-2023
• Ref Project: oSIST prEN 6050:2023 - Aerospace series - Pin, close tolerance, swage locking, 100° countersunk reduced head, shear type, in aluminium alloy 7050, conversion coating - Inch series

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2023
Aeronavtika - Zatič, ozka toleranca, pritrdilni, 100° ugrezna glava, strižni tip, iz
aluminijeve zlitine 7050, prevleke - Palčne mere
Aerospace series - Pin, close tolerance, swage locking, 100° countersunk reduced head,
shear type, in aluminium alloy 7050, conversion coating - Inch series
Luft- und Raumfahrt - Passniete für Quetschverriegelung mit reduziertem Senkkopf 100°,
für Scherbeanspruchung, aus Aluminiumlegierung 7050, Schmierfilm behandelt - Zoll-
Reihe
Série aérospatiale - Rivets de précision, boulon serti, à tête fraisée 100° réduite,
cisaillement-type, en alliage d’aluminium 7050, film sec - Série en inches
Ta slovenski standard je istoveten z: prEN 6050
ICS:
49.025.20 Aluminij Aluminium
49.030.40 Zatiči, žeblji Pins, nails
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2023
ICS 49.060
English Version
Aerospace series - Pin, close tolerance, swage locking, 100°
countersunk reduced head, shear type, in aluminium alloy
7050, conversion coating - Inch series
Série aérospatiale - Rivets de précision, boulon serti, à Luft- und Raumfahrt - Passniete für
tête fraisée 100° réduite, cisaillement-type, en alliage Quetschverriegelung mit reduziertem Senkkopf 100°,
d'aluminium 7050, film sec - Série en inches für Scherbeanspruchung, aus Aluminiumlegierung
7050, Schmierfilm behandelt - Zoll-Reihe
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 6050:2023 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Requirements . 4
4.1 Configuration, dimensions, tolerances and mass. 4
4.2 Material and surface treatment . 6
4.3 Mechanical properties . 6
4.4 Pin version. 7
5 Designation . 7
6 Marking . 7
7 Technical specification . 7
8 Example of installation . 7
9 Quality Management System . 8
Bibliography . 9

European foreword
This document (prEN 6050:2023) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
1 Scope
This document specifies the characteristics of close tolerance pins, swage locking, 100° countersunk
reduced head, shear type, in aluminium alloy 7050-T73 with chemical film, inch series, with a maximum
operating temperature of 80 °C for aerospace application.
2 Normative references
The following documents are
...