EN ISO 7214:2007

Cellular plastics - Polyethylene - Methods of test (ISO 7214:2007)

ISO 7214:2007 specifies methods for testing flexible and semi-rigid cellular plastics made from polyethylene. Cellular plastics containing copolymers of ethylene or blends of polymers with polyethylene may also be tested by the procedures of this International Standard provided these materials have characteristics similar to polyethylene or copolymers of ethylene.
The tests are divided into mandatory tests suitable for characterization of cellular polyethylene regardless of end use, and optional tests for the determination of properties that are relevant to certain uses only.

Schaumstoffe - Polyethylen - Prüfverfahren (ISO 7214:2007)

1.1   Diese Internationale Norm legt Prüfverfahren für weich-elastische und halbharte Schaumstoffe aus Polyethylen fest. Schaumstoffe, die Ethylen-Copolymere oder Mischungen aus Polymeren mit Polyethylen enthalten, dürfen ebenso nach den Verfahren dieser Internationalen Norm geprüft werden, vorausgesetzt, diese Materialien haben ähnliche Eigenschaften wie Polyethylen nach ISO 1872 1 oder Ethylen-Copolymere nach ISO 4613 1.
1.2   Im Abschnitt 7 sind obligatorische Prüfverfahren festgelegt, die für die Kennzeichnung der Polyethylen¬schaumstoffe geeignet sind, ohne die Anwendung zu berücksichtigen. Im Abschnitt 8 werden die wahlfreien Prüfverfahren zur Bestimmung von Eigenschaften, die sich auf bestimmte Einsatzgebiete beziehen, beschrie¬ben.

Plastiques alvéolaires - Polyéthylène - Méthodes d'essai (ISO 7214:2007)

L'ISO 7214:2007 spécifie des méthodes d'essai applicables aux matériaux plastiques alvéolaires souples et semi-rigides, fabriquées en polyéthylène. Les matériaux plastiques alvéolaires contenant des copolymères de l'éthylène ou des mélanges de polymères et de polyéthylène peuvent également être soumis à l'essai conformément aux modes opératoires spécifiés dans l'ISO 7214:2007, à condition qu'elles possèdent des caractéristiques similaires à celles du polyéthylène ou à celles des copolymères de l'éthylène.
Deux catégories d'essais sont spécifiées: les essais de base, qui permettent de caractériser les polyéthylènes alvéolaires indépendamment de leur destination finale, et les essais supplémentaires, qui permettent de déterminer les propriétés qui sont utiles dans le cas de certaines utilisations.

Penjeni polimerni materiali - Polietilen - Preskusne metode (ISO 7214:2007)

General Information

• Status: Withdrawn
• Publication Date: 14-Jun-2007
• Withdrawal Date: 31-Mar-2012
• ICS: 83.100 - Cellular materials
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249 - Plastics
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Apr-2012
• Completion Date: 01-Apr-2012
• Ref Project: SIST EN ISO 7214:2007 - Cellular plastics - Polyethylene - Methods of test (ISO 7214:2007)

Relations

• Replaces: EN ISO 7214:2000 - Cellular plastics - Polyethylene - Methods of test (ISO 7214:1998)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 7214:2012 - Cellular plastics - Polyethylene - Methods of test (ISO 7214:2012)
• Effective Date: 03-Nov-2011

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 7214:2007
01-september-2007
1DGRPHãþD
SIST EN ISO 7214:2001
Penjeni polimerni materiali - Polietilen - Preskusne metode (ISO 7214:2007)
Cellular plastics - Polyethylene - Methods of test (ISO 7214:2007)
Schaumstoffe - Polyethylen - Prüfverfahren (ISO 7214:2007)
Plastiques alvéolaires - Polyéthylene - Méthodes d'essai (ISO 7214:2007)
Ta slovenski standard je istoveten z: EN ISO 7214:2007
ICS:
83.100 Penjeni polimeri Cellular materials
SIST EN ISO 7214:2007 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 7214
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2007
ICS 83.100 Supersedes EN ISO 7214:2000
English Version
Cellular plastics - Polyethylene - Methods of test (ISO
7214:2007)
Plastiques alvéolaires - Polyéthylène - Méthodes d'essai Schaumstoffe - Polyethylen - Prüfverfahren (ISO
(ISO 7214:2007) 7214:2007)
This European Standard was approved by CEN on 21 May 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7214:2007: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 7214:2007 (E)





Foreword


This document (EN ISO 7214:2007) has been prepared by Technical Committee ISO/TC 61
"Plastics" in collaboration with Technical Committee CEN/TC 249 "Plastics", the secretariat of
which is held by NBN.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by December 2007, and conflicting national
standards shall be withdrawn at the latest by December 2007.

This document supersedes EN ISO 7214:2000.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United
Kingdom.


Endorsement notice

The text of ISO 7214:2007 has been approved by CEN as EN ISO 7214:2007 without any
modifications.

2

---------------------- Page: 3 ----------------------

INTERNATIONAL ISO
STANDARD 7214
Third edition
2007-06-15


Cellular plastics — Polyethylene —
Methods of test
Plastiques alvéolaires — Polyéthylène — Méthodes d'essai




Reference number
ISO 7214:2007(E)
©
ISO 2007

---------------------- Page: 4 ----------------------

ISO 7214:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2007
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any for
...