Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 025: Cable outlet, style A, straight, unsealed, with cable tie strain relief for EN 3646 - Product standard

This product standard defines a range of cable outlets, straight, style A, for use under the following conditions:
Associated electrical connector(s)   :   EN 3660-002
Temperature range,   Class A   :    65 °C to 200 °C
   Class N   :    65 °C to 200 °C
   Class W   :    65 °C to 175 °C

Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 025: Endgehäuse, Bauform A, gerade, nicht abgedichtet, mit Arm für Kabelbinder für EN 3646 - Produktnorm

Diese Produktnorm legt eine Reihe von Endgehäusen, gerade, Bauform A, für die Verwendung unter
folgenden Bedingungen fest:
Zugehörige(r) elektrische(r) Steckverbinder : EN 3660-002
Temperaturbereich, Klasse A : 65 °C bis 200 °C
Klasse N : 65 °C bis 200 °C
Klasse W : 65 °C bis 175 °C

Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 025 : Raccord, droit, type A, non étanche, avec tenue du câble par frettage pour EN 3646 - Norme de produit

Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje - 025. del: Kabelska spojka, tip A, ravna, netesnjena, z držalom za spojko za EN 3646 - Standard za proizvod

General Information

Status
Withdrawn
Publication Date
10-Feb-2009
Withdrawal Date
08-Jan-2013
Technical Committee
Drafting Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
09-Jan-2013
Completion Date
09-Jan-2013

Relations

Buy Standard

Standard
EN 3660-025:2009
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 025: Endgehäuse, Bauform A, gerade, nicht abgedichtet, mit Arm für Kabelbinder für EN 3646 - ProduktnormSérie aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 025: Raccord, droit, type A, non étanche, avec tenue du câble par frettage pour EN 3646 - Norme de produitAerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 025: Cable outlet, style A, straight, unsealed, with cable tie strain relief for EN 3646 - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3660-025:2009SIST EN 3660-025:2009en01-maj-2009SIST EN 3660-025:2009SLOVENSKI
STANDARD



SIST EN 3660-025:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3660-025February 2009ICS 49.060 English VersionAerospace series - Cable outlet accessories for circular
andrectangular electrical and optical connectors - Part 025: Cableoutlet, style A, straight, unsealed,
with cable tie strain relief forEN 3646 - Product standardSérie aérospatiale - Accessoires arrière pour connecteurscirculaires et rectangulaires électriques et optiques - Partie025 :
Raccord, droit, type A, non étanche, avec tenue ducâble par frettage pour EN 3646 - Norme de produitThis European Standard was approved by CEN on 6 September 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3660-025:2009: ESIST EN 3660-025:2009



EN 3660-025:2009 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Characteristics .4 5 Designation . 10 6 Marking . 10 7 Technical specification . 10
SIST EN 3660-025:2009



EN 3660-025:2009 (E) 3 Foreword This document (EN 3660-025:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2009, and conflicting national standards shall be withdrawn at the latest by August 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be hel
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.