prEN ISO 18589-6
(Main)Measurement of radioactivity in the environment - Soil - Part 6: Gross alpha and gross beta activities - Test method using gas-flow proportional counting (ISO 18589-6:2019)
Measurement of radioactivity in the environment - Soil - Part 6: Gross alpha and gross beta activities - Test method using gas-flow proportional counting (ISO 18589-6:2019)
This document provides a method that allows an estimation of gross radioactivity of alpha- and beta-emitters present in soil samples. It applies, essentially, to systematic inspections based on comparative measurements or to preliminary site studies to guide the testing staff both in the choice of soil samples for measurement as a priority and in the specific analysis methods for implementation.
The gross α or β radioactivity is generally different from the sum of the effective radioactivities of the radionuclides present since, by convention, the same alpha counting efficiency is assigned for all the alpha emissions and the same beta counting efficiency is assigned for all the beta emissions.
Soil includes rock from bedrock and ore as well as construction materials and products, potery, etc. using naturally occurring radioactive materials (NORM) or those from technological processes involving Technologically Enhanced Naturally Occurring Radioactive Materials (TENORM), e.g. the mining and processing of mineral sands or phosphate fertilizer production and use.
The test methods described in this document can also be used to assess gross radioactivity of alpha- and beta-emitters in sludge, sediment, construction material and products following proper sampling procedure[2][3][4][5][7][8].
For simplification, the term “soil” used in this document covers the set of elements mentioned above.
Ermittlung der Radioaktivität in der Umwelt - Erdboden - Teil 6: Gesamt-Alpha- und Gesamt-Betaaktivitäten - Messverfahren mit Durchfluss Proportionalzählung
Dieses Dokument legt ein Verfahren fest, das die Erfassung der gesamten Radioaktivität der in Bodenproben enthaltenen Alpha- und Betaemitter ermöglicht. Es gilt im Wesentlichen für systematische Überprüfungen auf der Grundlage vergleichender Messungen oder lokaler Vorstudien, um dem Prüfpersonal eine Anleitung sowohl für die Auswahl der vorrangig zu messenden Bodenproben als auch für spezifische Analysemethoden für die Implementierung an die Hand zu geben.
Die Gesamt-Alpha- oder -Betaaktivität unterscheidet sich generell von der Summe der effektiven Aktivitäten der vorhandenen Radionuklide, da per Konvention dieselbe Alphazählausbeute für alle Alphaemissionen und dieselbe Betazählausbeute für alle Betaemissionen zugeordnet ist.
Erdboden beinhaltet sowohl Brocken von Felsgestein und Erz als auch Baustoffe und -produkte, Keramik usw., natürlich vorkommende radioaktive Stoffe (NORM) oder jene aus technologischen Prozessen, die tech-nologisch verbesserte natürlich vorkommende radioaktive Stoffe (TENORM, en: Technologically Enhanced Naturally Occurring Radioactive Materials) einbeziehen, z. B. die Förderung und die Verarbeitung von mineralischen Sanden oder die Produktion und Anwendung von Phosphatdüngern.
Die in diesem Dokument beschriebenen Prüfverfahren können bei Befolgung eines ordnungsgemäßen Pro-benahmeverfahrens auch für die Messung der Gesamt-Alpha- und Gesamt-Betaaktivität von Radionukliden in Schlamm, Sediment, Baustoffen und -produkten verwendet werden [2], [3], [4], [5], [7], [8].
Zur Vereinfachung deckt der Begriff „Erdboden“ im vorliegenden Dokument die vorgenannte Reihe von Ele-menten ab.
Mesurage de la radioactivité dans l'environnement - Sol - Partie 6: Mesurage des activités alpha globale et bêta globale - Méthode d’essai utilisant un compteur proportionnel à circulation gazeuse (ISO 18589-6:2019)
Merjenje radioaktivnosti v okolju - Tla - 6. del: Skupna alfa in skupna beta aktivnost - Preskusna metoda z uporabo proporcionalnega merjenja pretoka plina (ISO 18589-6:2019)
General Information
Standards Content (sample)
SLOVENSKI STANDARD
oSIST prEN ISO 18589-6:2021
01-junij-2021
Merjenje radioaktivnosti v okolju - Tla - 6. del: Skupna alfa in skupna beta
aktivnost - Preskusna metoda z uporabo proporcionalnega merjenja pretoka plina
(ISO 18589-6:2019)
Measurement of radioactivity in the environment - Soil - Part 6: Gross alpha and gross
beta activities - Test method using gas-flow proportional counting (ISO 18589-6:2019)
Mesurage de la radioactivité dans l'environnement - Sol - Partie 6: Mesurage desactivités alpha globale et bêta globale - Méthode d’essai utilisant un compteur
proportionnel à circulation gazeuse (ISO 18589-6:2019)
Ta slovenski standard je istoveten z: prEN ISO 18589-6
ICS:
13.080.99 Drugi standardi v zvezi s Other standards related to
kakovostjo tal soil quality
17.240 Merjenje sevanja Radiation measurements
oSIST prEN ISO 18589-6:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN ISO 18589-6:2021
---------------------- Page: 2 ----------------------
oSIST prEN ISO 18589-6:2021
INTERNATIONAL ISO
STANDARD 18589-6
Second edition
2019-12
Measurement of radioactivity in the
environment — Soil —
Part 6:
Gross alpha and gross beta activities
— Test method using gas-flow
proportional counting
Mesurage de la radioactivité dans l'environnement — Sol —
Partie 6: Mesurage des activités alpha globale et bêta globale —
Méthode d’essai utilisant un compteur proportionnel à circulation
gazeuse
Reference number
ISO 18589-6:2019(E)
ISO 2019
---------------------- Page: 3 ----------------------
oSIST prEN ISO 18589-6:2021
ISO 18589-6:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 18589-6:2021
ISO 18589-6:2019(E)
Contents Page
Foreword ........................................................................................................................................................................................................................................iv
Introduction ..................................................................................................................................................................................................................................v
1 Scope ................................................................................................................................................................................................................................. 1
2 Normative references ...................................................................................................................................................................................... 1
3 Terms and definitions ..................................................................................................................................................................................... 1
4 Symbols .......................................................................................................................................................................................................................... 2
5 Principle ........................................................................................................................................................................................................................ 2
6 Chemical reagents and equipment .................................................................................................................................................... 2
7 Procedure..................................................................................................................................................................................................................... 3
7.1 Preparation of sources ..................................................................................................................................................................... 3
7.2 Calibration .................................................................................................................................................................................................. 3
7.2.1 Principle .................................................................................................................................................................................. 3
7.2.2 Procedure ............................................................................................................................................................................... 4
7.3 Calibration curves ................................................................................................................................................................................ 5
7.4 Background determination .......................................................................................................................................................... 5
7.5 Measurement ............................................................................................................................................................................................ 5
8 Expression of results ........................................................................................................................................................................................ 5
8.1 Activities per unit mass ................................................................................................................................................................... 5
8.1.1 Calculation of alpha activity per unit of mass ......................................................................................... 5
8.1.2 Calculation of beta activity per unit of mass ............................................................................................ 5
8.2 Standard uncertainty ......................................................................................................................................................................... 6
8.2.1 Standard uncertainty of the alpha activity per unit of mass ...................................................... 6
8.2.2 Standard uncertainty of the beta activity per unit of mass ......................................................... 6
8.3 Decision threshold ............................................................................................................................................................................... 7
8.3.1 Decision threshold of the alpha activity per unit of mass ............................................................ 7
8.3.2 Decision threshold of the beta activity per unit of mass ............................................................... 7
8.4 Detection limit ......................................................................................................................................................................................... 8
8.4.1 Detection limit of the alpha activity per unit of mass ...................................................................... 8
8.4.2 Detection limit of the beta activity per unit of mass ......................................................................... 8
8.5 Confidence limits................................................................................................................................................................................... 8
9 Test report ................................................................................................................................................................................................................... 9
Annex A (informative) Preparation of reference measurement standards with plutonium 239 ......10
Bibliography .............................................................................................................................................................................................................................12
© ISO 2019 – All rights reserved iii---------------------- Page: 5 ----------------------
oSIST prEN ISO 18589-6:2021
ISO 18589-6:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/ iso/ foreword .html.This document was prepared by Technical Committee ISO/TC 85, Nuclear energy, nuclear technologies
and radiological protection, Subcommittee SC 2, Radiological protection.This second edition cancels and replaces the first edition (ISO 18589-6:2009), which has been
technically revised.The main change compared to the previous edition is as follows:
— The introduction has been reviewed accordingly to the generic introduction adopted for the
standards published on the radioactivity measurement in the environment.A list of all parts in the ISO 18589 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.iv © ISO 2019 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 18589-6:2021
ISO 18589-6:2019(E)
Introduction
Everyone is exposed to natural radiation. The natural sources of radiation are cosmic rays and
naturally occurring radioactive substances which exist in the earth and flora and fauna, including the
human body. Human activities involving the use of radiation and radioactive substances add to the
radiation exposure from this natural exposure. Some of those activities, such as the mining and use
of ores containing naturally-occurring radioactive materials (NORM) and the production of energy
by burning coal that contains such substances, simply enhance the exposure from natural radiation
sources. Nuclear power plants and other nuclear installations use radioactive materials and produce
radioactive effluent and waste during operation and decommissioning. The use of radioactive materials
in industry, agriculture and research is expanding around the globe.All these human activities give rise to radiation exposures that are only a small fraction of the global
average level of natural exposure. The medical use of radiation is the largest and a growing man-made
source of radiation exposure in developed countries. It includes diagnostic radiology, radiotherapy,
nuclear medicine and interventional radiology.Radiation exposure also occurs as a result of occupational activities. It is incurred by workers in
industry, medicine and research using radiation or radioactive substances, as well as by passengers
and crew during air travel. The average level of occupational exposures is generally below the global
average level of natural radiation exposure (see Reference [1]).As uses of radiation increase, so do the potential health risk and the public's concerns. Thus, all these
exposures are regularly assessed in order to:— improve the understanding of global levels and temporal trends of public and worker exposure;
— evaluate the components of exposure so as to provide a measure of their relative importance;
— identify emerging issues that may warrant more attention and study. While doses to workers are
mostly directly measured, doses to the public are usually assessed by indirect methods using the
results of radioactivity measurements of waste, effluent and/or environmental samples.
To ensure that the data obtained from radioactivity monitoring programs support their intended use, it
is essential that the stakeholders (for example nuclear site operators, regulatory and local authorities)
agree on appropriate methods and procedures for obtaining representative samples and for handling,
storing, preparing and measuring the test samples. An assessment of the overall measurement
uncertainty also needs to be carried out systematically. As reliable, comparable and ‘fit for purpose’
data are an essential requirement for any public health decision based on radioactivity measurements,
international standards of tested and validated radionuclide test methods are an important tool for
the production of such measurement results. The application of standards serves also to guarantee
comparability of the test results over time and between different testing laboratories. Laboratories
apply them to demonstrate their technical competences and to complete proficiency tests successfully
during interlaboratory comparisons, two prerequisites for obtaining national accreditation.
Today, over a hundred International Standards are available to testing laboratories for measuring
radionuclides in different matrices.Generic standards help testing laboratories to manage the measurement process by setting out the
general requirements and methods to calibrate equipment and validate techniques. These standards
underpin specific standards which describe the test methods to be performed by staff, for example, for
different types of sample. The specific standards cover test methods for:40 3 14
— naturally-occurring radionuclides (including K, H, C and those originating from the thorium
226 228 234 238 210and uranium decay series, in particular Ra, Ra, U, U and Pb) which can be found in
materials from natural sources or can be released from technological processes involving naturally
occurring radioactive materials (e.g. the mining and processing of mineral sands or phosphate
fertilizer production and use);© ISO 2019 – All rights reserved v
---------------------- Page: 7 ----------------------
oSIST prEN ISO 18589-6:2021
ISO 18589-6:2019(E)
— human-made radionuclides, such as transuranium elements (americium, plutonium, neptunium,
3 14 90and curium), H, C, Sr and gamma-ray emitting radionuclides found in waste, liquid and gaseous
effluent, in environmental matrices (water, air, soil and biota), in food and in animal feed as a result
of authorized releases into the environment, fallout from the explosion in the atmosphere of nuclear
devices and fallout from accidents, such as those that occurred in Chernobyl and Fukushima.
The fraction of the background dose rate to man from environmental radiation, mainly gamma
radiation, is very variable and depends on factors such as the radioactivity of the local rock and soil, the
nature of building materials and the construction of buildings in which people live and work.
A reliable determination of the activity concentration of gamma-ray emitting radionuclides in various
matrices is necessary to assess the potential human exposure, to verify compliance with radiation
protection and environmental protection regulations or to provide guidance on reducing health risks.
Gamma-ray emitting radionuclides are also used as tracers in biology, medicine, physics, chemistry, and
engineering. Accurate measurement of the activities of the radionuclides is also needed for homeland
security and in connection with the Non-Proliferation Treaty (NPT).This document describes the requirements to allow an estimation of gross radioactivity of alpha- and
beta-emitters in soil samples after proper sampling, sample handling and test sample preparation in a
testing laboratory or in situ.This document is to be used in the context of a quality assurance management system (ISO/IEC 17025).
This document is published in several parts for use jointly or separately according to needs. These parts
are complementary and are addressed to those responsible for determining the radioactivity present
in soil, bedrocks and ore (NORM or TENORM). The first two parts are general in nature describe the
setting up of programmes and sampling techniques, methods of general processing of samples in the
laboratory (ISO 18589-1), the sampling strategy and the soil sampling technique, soil sample handling
and preparation (ISO 18589-2). ISO 18589-3 to ISO 18589-5 deal with nuclide-specific test methods
to quantify the activity concentration of gamma emitters radionuclides (ISO 18589-3 and ISO 20042),
plutonium isotopes (ISO 18589-4) and Sr (ISO 18589-5) of soil samples. ISO 18589-6 deals with
non-specific measurements to quantify rapidly gross alpha or gross beta activities and ISO 18589-7
describes in situ measurement of gamma-emitting radionuclides.The test methods described in ISO 18589-3 to ISO 18589-6 can also be used to measure the radionuclides
in sludge, sediment, construction material and products following proper sampling procedure.
This document is one of a set of International Standards on measurement of radioactivity in the
environment.Additional parts can be added to ISO 18589 in the future if the standardization of the measurement of
other radionuclides becomes necessary.vi © ISO 2019 – All rights reserved
---------------------- Page: 8 ----------------------
oSIST prEN ISO 18589-6:2021
INTERNATIONAL STANDARD ISO 18589-6:2019(E)
Measurement of radioactivity in the environment — Soil —
Part 6:
Gross alpha and gross beta activities — Test method using
gas-flow proportional counting
1 Scope
This document provides a method that allows an estimation of gross radioactivity of alpha- and beta-
emitters present in soil samples. It applies, essentially, to systematic inspections based on comparative
measurements or to preliminary site studies to guide the testing staff both in the choice of soil samples
for measurement as a priority and in the specific analysis methods for implementation.
The gross α or β radioactivity is generally different from the sum of the effective radioactivities of the
radionuclides present since, by convention, the same alpha counting efficiency is assigned for all the
alpha emissions and the same beta counting efficiency is assigned for all the beta emissions.
Soil includes rock from bedrock and ore as well as construction materials and products, potery, etc.
using naturally occurring radioactive materials (NORM) or those from technological processes
involving Technologically Enhanced Naturally Occurring Radioactive Materials (TENORM), e.g. the
mining and processing of mineral sands or phosphate fertilizer production and use.
The test methods described in this document can also be used to assess gross radioactivity of alpha-
and beta-emitters in sludge, sediment, construction material and products following proper sampling
[2][3][4][5][7][8]procedure .
For simplification, the term “soil” used in this document covers the set of elements mentioned above.
2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 11074, Soil quality — VocabularyISO/IEC 17025, General requirements for the competence of testing and calibration laboratories
ISO 18589-1, Measurement of radioactivity in the environment — Soil — Part 1: General guidelines and
definitionsISO 18589-2, Measurement of radioactivity in the environment — Soil — Part 2: Guidance for the selection
of the sampling strategy, sampling and pre-treatment of samplesISO 18589-4, Measurement of radioactivity in the environment — Soil — Part 4: Plutonium 238 and
plutonium 239 + 240 — Test method using alpha spectrometryISO 80000-10, Quantities and units — Part 10: Atomic and nuclear physics
3 Terms and definitions
For the purposes of this document, the
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.