Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters - Amendment 1: Peak count number (ISO 4287:1997/Amd 1:2009)

This International Standard specifies terms, definitions and parameters for the determination of surface texture (roughness, waviness and primary profile) by profiling methods.

Geometrische Produktspezifikation (GPS) - Oberflächenbeschaffenheit: Tastschnittverfahren - Benennungen, Definitionen und Kenngrößen der Benennungen, Definitionen und Kenngrößen der Oberflächenbeschaffenheit (ISO 4287:1997/Amd 1:2009)

Diese Internationale Norm enthält Definitionen und Kenngrößen zur Beschreibung der Oberflächenbeschaffenheit
(Rauheits-, Welligkeits- und Primärprofil) durch das Tastschnittverfahren.

Spécification géométrique des produits (GPS) - État de surface: Méthode du profil - Termes, définitions et paramètres d'état de surface - Amendement 1: Nombre de pics (ISO 4287:1997/Amd 1:2009)

Specifikacija geometrijskih veličin izdelka - Tekstura površine: profilna metoda - Izrazi, definicije in parametri teksture površine (ISO 4287:1997/Amd 1:2009)

Ta mednarodni standard določa izraze, definicije in parametre za določevanje teksture površine (hrapavosti, valovitosti in primarnega profila) z metodami profiliranja.

General Information

Status
Withdrawn
Publication Date
14-Jun-2009
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
19-Jan-2022

RELATIONS

Buy Standard

Amendment
EN ISO 4287:2000/A1:2011
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 4287:2000/A1:2011
01-junij-2011

6SHFLILNDFLMDJHRPHWULMVNLKYHOLþLQL]GHOND7HNVWXUDSRYUãLQHSURILOQDPHWRGD

,]UD]LGHILQLFLMHLQSDUDPHWULWHNVWXUHSRYUãLQH ,62$PG

Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms,

definitions and surface texture parameters - Amendment 1: Peak count number (ISO
4287:1997/Amd 1:2009)
Geometrische Produktspezifikation (GPS) - Oberflächenbeschaffenheit:
Tastschnittverfahren - Benennungen, Definitionen und Kenngrößen der Benennungen,
Definitionen und Kenngrößen der Oberflächenbeschaffenheit (ISO 4287:1997/Amd
1:2009)

Spécification géométrique des produits (GPS) - État de surface: Méthode du profil -

Termes, définitions et paramètres d'état de surface - Amendement 1: Nombre de pics

(ISO 4287:1997/Amd 1:2009)
Ta slovenski standard je istoveten z: EN ISO 4287:1998/A1:2009
ICS:
01.040.17 Meroslovje in merjenje. Metrology and measurement.
Fizikalni pojavi (Slovarji) Physical phenomena
(Vocabularies)
17.040.20 Lastnosti površin Properties of surfaces
SIST EN ISO 4287:2000/A1:2011 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 4287:2000/A1:2011
---------------------- Page: 2 ----------------------
SIST EN ISO 4287:2000/A1:2011
EUROPEAN STANDARD
EN ISO 4287:1998/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2009
ICS 01.040.17; 17.040.20
English Version
Geometrical Product Specifications (GPS) - Surface texture:
Profile method - Terms, definitions and surface texture
parameters - Amendment 1: Peak count number (ISO
4287:1997/Amd 1:2009)

Spécification géométrique des produits (GPS) - État de Geometrische Produktspezifikation (GPS) -

surface: Méthode du profil - Termes, définitions et Oberflächenbeschaffenheit: Tastschnittverfahren - Begriffe

paramètres d'état de surface - Amendement 1: Nombre de und Oberflächenkenngrößen - Änderung 1:

pics (ISO 4287:1997/Amd 1:2009) Spitzenzählparamenter (ISO 4287:1997/Amd 1:2009)

This amendment A1 modifies the European Standard EN ISO 4287:1998; it was approved by CEN on 27 May 2009.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this

amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such

national standards may be obtained on application to the CEN Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the

responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official

versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,

France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,

Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4287:1998/A1:2009: E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 4287:2000/A1:2011
EN ISO 4287:1998/A1:2009 (E)
Contents Page

Foreword ..............................................................................................................................................................3

---------------------- Page: 4 ----------------------
SIST EN ISO 4287:2000/A1:2011
EN ISO 4287:1998/A1:2009 (E)
Foreword

This document (EN ISO 4287:1998/A1:2009) has been prepared by Technical Committee ISO/TC 213

"Dimensional and geometrical product specifications and verification" in collaboration with Technical

Committee CEN/TC 290 “Dimensional and geometrical product specification and verification” the secretariat of

which is held by AFNOR.

This Amendment to the European Standard EN ISO 4287:1998 shall be given the status of a national

standard, either by publication of an identical text or by endorsement, at the latest by December 2009, and

conflicting national standards shall be withdrawn at the latest by December 2009.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following

countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech

Republic, Denmark, Estonia, Finland, France, Germany, Greece,
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.