EN 1114-1:1996
(Main)Rubber and plastics machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders
Rubber and plastics machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders
In respect of the hazards listed in 4.1 and dealt with in 5, this standard specifies the safety requirements for the design and construction of the following kinds of screw type extruders for plastics and rubber: - single screw extruders - twin screw extruders - multi/multiple screw extruders - hot feed extruders - cold feed extruders - vacuum extruders - pin extruders The standard additionally covers the following feeding systems: - hoppers - single roller feeding systems - double roller feeding systems - crammer feeding systems and the following ancillary equipment which form part of or are attached to the extruder: - screen changers - melt/gear pumps - melt ducts - static mixers - degassing equipment - shear head devices - extruder head This standard only applies to extruder heads that give initial shape to the plasticised material. This standards does not apply to extruders without screws e.g.: - piston extruders - disc extruders - roller extruders This standard applies primarily to machines which are manufactured after the date of approval of this European Standard.
Gummi- und Kunststoffmaschinen - Extruder und Extrusionsanlagen - Teil 1: Sicherheitsanforderungen für Extruder
Diese Norm enthält die Sicherheitsanforderungen bezüglich der in 4.1 aufgelisteten und in 5 behandelten Gefährdungen für Konzipierung und Bau folgender Bauarten von Schneckenextrudern für Gummi und Kunststoffe: Einschneckenextruder, Zweischneckenextruder, Mehrschneckenextruder/Koextruder, Heißfütterextruder, Kaltfütterextruder, Vakuumextruder, Stiftextruder.
Machines pour le caoutchouc et les matières plastiques - Extrudeuses et lignes d'extrusion - Partie 1: Exigences de sécurité pour les extrudeuses
En rapport avec les phénomènes dangereux donnés au paragraphe 4.1 et en agrémen avec le contenu de l'article 5, la présente norme spécifie les prescriptions de sécurité pour la conception et la construction des extrudeuses à vis pour plastiques et caoutchouc des types suivants: extrudeuses monovis, extrudeuses bivis, extrudeuses multivis/extrudeuses multiples, extrudeuses à alimentation à chaud, extrudeuses à alimentation à froid, extrudeuses à dégazage, extrudeuses à picots.
Rubber and plastics machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 1114-1:2000
01-april-2000
Rubber and plastics machines - Extruders and extrusion lines - Part 1: Safety
requirements for extruders
Rubber and plastics machines - Extruders and extrusion lines - Part 1: Safety
requirements for extruders
Gummi- und Kunststoffmaschinen - Extruder und Extrusionsanlagen - Teil 1:
Sicherheitsanforderungen für Extruder
Machines pour le caoutchouc et les matieres plastiques - Extrudeuses et lignes
d'extrusion - Partie 1: Exigences de sécurité pour les extrudeuses
Ta slovenski standard je istoveten z: EN 1114-1:1996
ICS:
83.200 Oprema za gumarsko Equipment for the rubber and
industrijo in industrijo plastics industries
polimernih materialov
SIST EN 1114-1:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 1114-1:2000
---------------------- Page: 2 ----------------------
SIST EN 1114-1:2000
---------------------- Page: 3 ----------------------
SIST EN 1114-1:2000
---------------------- Page: 4 ----------------------
SIST EN 1114-1:2000
---------------------- Page: 5 ----------------------
SIST EN 1114-1:2000
---------------------- Page: 6 ----------------------
SIST EN 1114-1:2000
---------------------- Page: 7 ----------------------
SIST EN 1114-1:2000
---------------------- Page: 8 ----------------------
SIST EN 1114-1:2000
---------------------- Page: 9 ----------------------
SIST EN 1114-1:2000
---------------------- Page: 10 ----------------------
SIST EN 1114-1:2000
---------------------- Page: 11 ----------------------
SIST EN 1114-1:2000
---------------------- Page: 12 ----------------------
SIST EN 1114-1:2000
---------------------- Page: 13 ----------------------
SIST EN 1114-1:2000
---------------------- Page: 14 ----------------------
SIST EN 1114-1:2000
---------------------- Page: 15 ----------------------
SIST EN 1114-1:2000
---------------------- Page: 16 ----------------------
SIST EN 1114-1:2000
---------------------- Page: 17 ----------------------
SIST EN 1114-1:2000
---------------------- Page: 18 ----------------------
SIST EN 1114-1:2000
---------------------- Page: 19 ----------------------
SIST EN 1114-1:2000
---------------------- Page: 20 ----------------------
SIST EN 1114-1:2000
---------------------- Page: 21 ----------------------
SIST EN 1114-1:2000
---------------------- Page: 22 ----------------------
SIST EN 1114-1:2000
---------------------- Page: 23 ----------------------
SIST EN 1114-1:2000
---------------------- Page: 24 ----------------------
SIST EN 1114-1:2000
---------------------- Page: 25 ----------------------
SIST EN 1114-1:2000
---------------------- Page: 26 ----------------------
SIST EN 1114-1:2000
---------------------- Page: 27 ----------------------
SIST EN 1114-1:2000
---------------------- Page: 28 ----------------------
SIST EN 1114-1:2000
-----------------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.