Railway Applications - Acoustics - Determination of the dynamic stiffness of elastic track components related to noise and vibration: Rail pads and rail fastening assemblies

This document specifies laboratory test procedures to determine a high-frequency dynamic stiffness, “acoustic stiffness”, of resilient components of rail fastening assemblies.
This document is applicable to complete rail fastening assemblies and to pad components of fastening systems including both discrete and continuous fastening systems.
It is applicable to the measurement of the dynamic transfer stiffness under a prescribed pre-load and the associated hysteretic damping loss factor.
It provides measurement methods and pre-load, excitation and frequency range conditions for application to ground borne and structure borne noise as well as for rolling noise.
It is not applicable to the measurement of the stiffness of pads and fastening assemblies under static or low-frequency dynamic loading used for track mechanics.

Bahnanwendungen - Akustik - Bestimmung der dynamischen Steifigkeit von elastischen Komponenten im Oberbau in Bezug auf Schall und Schwingungen - Zwischenlagen/Zwischenplatten und Schienenbefestigungssysteme

Dieses Dokument legt Labor-Prüfverfahren zur Bestimmung einer hochfrequenten dynamischen Steifigkeit, der „akustischen Steifigkeit“, von elastischen Komponenten von Schienenbefestigungssystemen fest.
Dieses Dokument ist anwendbar auf komplette Schienenbefestigungssysteme und auf Zwischenlagen/Zwischenplatten von Befestigungssystemen, einschließlich sowohl diskreter als auch kontinuierlicher Befestigungs¬systeme.
Es ist anwendbar auf die Messung der dynamischen Transfersteifigkeit unter einer vorgeschriebenen Vorlast und dem damit verbundenen hysteretischen Dämpfungsverlustfaktor.
Es stellt Messverfahren und Vorlast-, Anregungs- und Frequenzbereichsbedingungen für die Anwendung bei Boden- und Körperschall sowie bei Rollgeräuschen zur Verfügung.
Es ist nicht anwendbar auf die Messung der Steifigkeit von Zwischenlagen/Zwischenplatten und Befestigungssystemen unter statischer oder niederfrequenter dynamischer Belastung, die für die Oberbaumechanik verwendet wird.

Applications ferroviaires - Acoustique - Détermination de la raideur dynamique des composants élastiques de la voie pour le bruit et les vibrations - Semelles sous rail et systèmes d’attaches pour le rail

Le présent document spécifie les modes opératoires d'essai en laboratoire pour déterminer la raideur dynamique à haute fréquence (la « raideur acoustique ») des composants élastiques des systèmes de fixation du rail.
Le présent document est applicable aux systèmes de fixation du rail complets ainsi qu'aux composants « semelles » des systèmes de fixation, notamment les systèmes de fixation continus et discrets (ponctuels).
Il est applicable à la mesure de la raideur dynamique sous une précharge prescrite et de l'amortissement hystérétique associé.
Il fournit les méthodes de mesure et les conditions de précharge, d'excitation et de plage de fréquences à appliquer pour évaluer le bruit solidien et le bruit propagé par le solainsi que le bruit de roulement.
Il n'est pas applicable à la mesure de la raideur des semelles et des systèmes de fixation sous une charge statique ou dynamique basse fréquence utilisée pour évaluer les performances mécaniques de la voie.

Železniške naprave - Akustika - Ugotavljanje dinamične togosti elastičnih tirničnih komponent v povezavi s hrupom in vibracijami - Sestavi tirničnih podlag in tirnih pritrdilnih elementov

Ta evropski standard določa laboratorijske preskusne postopke za določanje dinamične togosti elastičnih tirničnih komponent z namenom vrednotenja okoljskega hrupa in vibracij.
Ta standard se uporablja za celotne sklope tirnih pritrdilnih elementov in za tirnične podlage sistemov za pritrditev.
Uporablja se za primerke enojnega pritrdilnega elementa tirničnega podstavka.
Uporablja se za merjenje tangentne, dinamične togosti pod predpisano predobremenitvijo in s tem povezanega histereznega faktorja izgube pri dušenju.
Zagotavlja merilne metode in pogoje predobremenitve, vzbujanja in frekvenčnega območja za uporabo pri hrupu, ki se prenaša s tal in struktur, ter kotalnem hrupu.
Zagotavlja merilne metode in pogoje predobremenitve, vzbujanja in frekvenčnega območja za uporabo pri hrupu, ki se prenaša s tal in struktur, ter kotalnem hrupu.
Ne uporablja se za merjenje togosti podlag in pritrdilnih elementov pri statični ali nizkofrekvenčni dinamični obremenitvi, ki je določena v standardu EN 13146-9.

General Information

Status
Published
Publication Date
30-Aug-2022
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
31-Aug-2022
Due Date
20-Apr-2022
Completion Date
31-Aug-2022

Buy Standard

Standard
EN 17495:2022
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 17495:2020
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 17495:2022
01-november-2022
Železniške naprave - Akustika - Ugotavljanje dinamične togosti elastičnih tirničnih
komponent v povezavi s hrupom in vibracijami - Sestavi tirničnih podlag in tirnih
pritrdilnih elementov
Railway Applications - Acoustics - Determination of the dynamic stiffness of elastic track
components related to noise and vibration - Rail pads and rail fastening assemblies
Bahnanwendungen - Akustik - Bestimmung der dynamischen Steifigkeit von elastischen
Komponenten im Oberbau in Bezug auf Schall und Schwingungen - Zwischenlagen und
Schienenbefestigungssysteme
Applications ferroviaires - Acoustique - Détermination de la raideur dynamique des
composants élastiques de la voie pour le bruit et les vibrations - Semelles sous rail et
systèmes de fixation du rail
Ta slovenski standard je istoveten z: EN 17495:2022
ICS:
17.140.30 Emisija hrupa transportnih Noise emitted by means of
sredstev transport
93.100 Gradnja železnic Construction of railways
SIST EN 17495:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 17495:2022

---------------------- Page: 2 ----------------------
SIST EN 17495:2022


EN 17495
EUROPEAN STANDARD

NORME EUROPÉENNE

August 2022
EUROPÄISCHE NORM
ICS 17.140.30; 93.100
English Version

Railway Applications - Acoustics - Determination of the
dynamic stiffness of elastic track components related to
noise and vibration: Rail pads and rail fastening
assemblies
Applications ferroviaires - Acoustique - Détermination Bahnanwendungen - Akustik - Bestimmung der
de la raideur dynamique des composants élastiques de dynamischen Steifigkeit von elastischen Komponenten
la voie pour le bruit et les vibrations: Semelles sous rail im Oberbau in Bezug auf Schall und Schwingungen:
et systèmes de fixation du rail Zwischenlagen und Schienenbefestigungssysteme
This European Standard was approved by CEN on 3 July 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17495:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 17495:2022
EN 17495:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Symbols and abbreviated terms . 6
5 General requirements . 7
5.1 General . 7
5.2 Apparatus .
...

SLOVENSKI STANDARD
oSIST prEN 17495:2020
01-junij-2020
Železniške naprave - Akustika - Ugotavljanje dinamične togosti elastičnih tirničnih
komponent v povezavi s hrupom in vibracijami - Sestavi tirničnih podlag in tirnih
pritrdilnih elementov
Railway Applications - Acoustics - Determination of the dynamic stiffness of elastic track
components related to noise and vibration - Rail pads and track fastener assemblies
Bahnanwendungen - Akustik - Bestimmung der dynamischen Steifigkeit von elastischen
Komponenten im Oberbau in Bezug auf Schall und Schwingungen - Zwischenlagen und
Schienenbefestigungssysteme
Applications ferroviaires - Acoustique - Détermination de la raideur dynamique des
composants élastiques de la voie pour le bruit et les vibrations - Semelles sous rail et
systèmes de fixation de la voie
Ta slovenski standard je istoveten z: prEN 17495
ICS:
17.140.30 Emisija hrupa transportnih Noise emitted by means of
sredstev transport
93.100 Gradnja železnic Construction of railways
oSIST prEN 17495:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 17495:2020

---------------------- Page: 2 ----------------------
oSIST prEN 17495:2020


DRAFT
EUROPEAN STANDARD
prEN 17495
NORME EUROPÉENNE

EUROPÄISCHE NORM

April 2020
ICS 17.140.30; 93.100
English Version

Railway Applications - Acoustics - Determination of the
dynamic stiffness of elastic track components related to
noise and vibration - Rail pads and track fastener
assemblies
Applications ferroviaires - Acoustique - Détermination Bahnanwendungen - Akustik - Bestimmung der
de la raideur dynamique des composants élastiques de dynamischen Steifigkeit von elastischen Komponenten
la voie pour le bruit et les vibrations - Semelles sous im Oberbau in Bezug auf Schall und Schwingungen -
rail et systèmes de fixation de la voie Zwischenlagen und Schienenbefestigungssysteme
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 256.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17495:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 17495:2020
prEN 17495:2020 (E)
Contents

European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Symbols and abbreviated terms . 7
5 General Requirements .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.