Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirements for general-purpose wire rod (ISO 16120-2:2011)

ISO 16120-2:2011 is applicable to general-purpose steel wire rod for drawing and/or cold rolling.

Walzdraht aus unlegiertem Stahl zum Ziehen - Teil 2: Besondere Anforderungen an Walzdraht für allgemeine Verwendung (ISO 16120-2:2011)

Dieser Teil der ISO 16120 gilt für Walzdraht für allgemeine Verwendung zum Ziehen und/oder Kaltwalzen.

Fil-machine en acier non allié destiné à la fabrication de fils - Partie 2: Exigences spécifiques au fil-machine d'usage général (ISO 16120-2:2011)

L'ISO 16120-2:2011 est applicable au fil-machine en acier d'usage général destiné au tréfilage et/ou au laminage à froid.

Vroče valjana žica iz nelegiranega jekla za vlečenje in/ali hladno valjanje - 2. del: Posebne zahteve za žico za splošno uporabo (ISO 16120-2:2011)

Ta del tega evropskega standarda velja za žico za splošno uporabo, namenjeno vlečenju in/ali hladnemu valjanju.

General Information

Status
Withdrawn
Publication Date
30-Jun-2011
Withdrawal Date
21-Feb-2017
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
22-Feb-2017

Relations

Buy Standard

Standard
EN ISO 16120-2:2011
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 16120-2:2010
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 16120-2:2011
01-november-2011
1DGRPHãþD
SIST EN 10016-2:1997
9URþHYDOMDQDåLFDL]QHOHJLUDQHJDMHNOD]DYOHþHQMHLQDOLKODGQRYDOMDQMHGHO
3RVHEQH]DKWHYH]DåLFR]DVSORãQRXSRUDER ,62
Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirements for general-
purpose wire rod (ISO 16120-2:2011)
Walzdraht aus unlegiertem Stahl zum Ziehen - Teil 2: Besondere Anforderungen an
Walzdraht für allgemeine Verwendung (ISO 16120-2:2011)
Fil-machine en acier non allié destiné à la fabrication de fils - Partie 2: Exigences
spécifiques au fil-machine d'usage général (ISO 16120-2:2011)
Ta slovenski standard je istoveten z: EN ISO 16120-2:2011
ICS:
77.140.65 Jeklene žice, jeklene vrvi in Steel wire, wire ropes and
verige link chains
SIST EN ISO 16120-2:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 16120-2:2011

---------------------- Page: 2 ----------------------

SIST EN ISO 16120-2:2011


EUROPEAN STANDARD
EN ISO 16120-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2011
ICS 77.140.60 Supersedes EN 10016-2:1994
English Version
Non-alloy steel wire rod for conversion to wire - Part 2: Specific
requirements for general-purpose wire rod (ISO 16120-2:2011)
Fil-machine en acier non allié destiné à la fabrication de fils Walzdraht aus unlegiertem Stahl zum Ziehen - Teil 2:
- Partie 2: Exigences spécifiques au fil-machine d'usage Besondere Anforderungen an Walzdraht für allgemeine
général (ISO 16120-2:2011) Verwendung (ISO 16120-2:2011)
This European Standard was approved by CEN on 30 June 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16120-2:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 16120-2:2011
EN ISO 16120-2:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 16120-2:2011
EN ISO 16120-2:2011 (E)
Foreword
This document (EN ISO 16120-2:2011) has been prepared by Technical Committee ISO/TC 17 "Steel" in
collaboration with Technical Committee ECISS/TC 106 “Wire rod and wires” the secretariat of which is held by
AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2012, and conflicting national standards shall be withdrawn at
the latest by January 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 10016-2:1994.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 16120-2:2011 has been approved by CEN as a EN ISO 16120-2:2011 without any
modification.


3

---------------------- Page: 5 ----------------------

SIST EN ISO 16120-2:2011

---------------------- Page: 6 ----------------------
...

SLOVENSKI STANDARD
oSIST prEN ISO 16120-2:2010
01-februar-2010
9URþHYDOMDQDåLFDL]QHOHJLUDQHJDMHNOD]DYOHþHQMHLQDOLKODGQRYDOMDQMHGHO
3RVHEQH]DKWHYH]DåLFR]DVSORãQRXSRUDER ,62',6
Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirements for general
purpose wire rod (ISO/DIS 16120- 2:2009)
Walzdraht aus unlegiertem Stahl zum Ziehen - Teil 2: Besondere Anforderungen an
Walzdraht für allgemeine Verwendung (ISO/DIS 16120-2:2009)
Fil-machine en acier non allié destiné à la fabrication de fils - Partie 2: Exigences
spécifiques au fil-machine d'usage général (ISO/DIS 16120-2:2009)
Ta slovenski standard je istoveten z: prEN ISO 16120-2
ICS:
77.140.65 Jeklene žice, jeklene vrvi in Steel wire, wire ropes and
verige link chains
oSIST prEN ISO 16120-2:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 16120-2:2010

---------------------- Page: 2 ----------------------
oSIST prEN ISO 16120-2:2010


EUROPEAN STANDARD
DRAFT
prEN ISO 16120-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

December 2009
ICS 77.140.60 Will supersede EN 10016-2:1994
English Version
Non-alloy steel wire rod for conversion to wire - Part 2: Specific
requirements for general purpose wire rod (ISO/DIS 16120-
2:2009)
Fil-machine en acier non allié destiné à la fabrication de fils Walzdraht aus unlegiertem Stahl zum Ziehen - Teil 2:
- Partie 2: Exigences spécifiques au fil-machine d'usage Besondere Anforderungen an Walzdraht für allgemeine
général (ISO/DIS 16120-2:2009) Verwendung (ISO/DIS 16120-2:2009)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
ECISS/TC 15.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 16120-2:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN ISO 16120-2:2010
prEN ISO 16120-2:2009 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------
oSIST prEN ISO 16120-2:2010
prEN ISO 16120-2:2009 (E)
Foreword
This document (prEN ISO 16120-2:2009) has been prepared by Technical Committee ISO/TC 17 "Steel" in
collaboration with Technical Committee ECISS/TC 15 “Wire-rod - Qualities, dimensions, tolerances and
specific tests” the secretariat of which is held by UNI.
This document is currently submitted to the parallel Enquiry.
This document will supersede EN 10016-2:1994.
Endorsement notice
The text of ISO/DIS 16120-2:2009 has been approved by CEN as a prEN ISO 16120-2:2009 without any
modification.

3

---------------------- Page: 5 ----------------------
oSIST prEN ISO 16120-2:2010

---------------------- Page: 6 ----------------------
oSIST prEN ISO 16120-2:2010
DRAFT INTERNATIONAL STANDARD ISO/DIS 16120-2
ISO/TC 17/SC 17 Secretariat: SAC
Voting begins on: Voting terminates on:
2009-12-03 2010-05-03
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Non-alloy steel wire rod for conversion to wire —
Part 2:
Specific requirements for general purpose wire rod
Fil-machine en acier non allié destiné à la fabrication de fils —
Pa
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.