iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1153:1995/AC:1996

(Corrigendum)

Kitchen furniture - Safety requirements and test methods for built-in and free standing kitchen cabinets and work tops

Kitchen furniture - Safety requirements and test methods for built-in and free standing kitchen cabinets and work tops

Küchenmöbel - Sicherheitstechnische Anforderungen und Prüfverfahren für eingebaute und freistehende Küchenschränke und Arbeitsplatten

Mobilier de cuisine - Exigences de sécurité et méthodes d'essais pour meubles de cuisine à fixer et à poser et plans de travail

Kuhinjsko pohištvo - Varnostne zahteve in preskusne metode za vgrajene in prostostoječe omare in delovne plošče

General Information

Status
Withdrawn
Publication Date
03-Jul-1996
Withdrawal Date
16-Aug-2005
ICS
97.040.10 - Kitchen furniture
Technical Committee
CEN/TC 207 - Furniture
Drafting Committee
CEN/TC 207 - Furniture
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
17-Aug-2005
Completion Date
17-Aug-2005
Ref Project
SIST EN 1153:1996/AC:2003 - Kitchen furniture - Safety requirements and test methods for built-in and free standing kitchen cabinets and work tops

Relations

Corrects
EN 1153:1995 - Kitchen furniture - Safety requirements and test methods for built-in and free standing kitchen cabinets and work tops
Effective Date
22-Dec-2008
Replaced By
EN 14749:2005 - Domestic and kitchen storage units and worktops - Safety requirements and test methods
Effective Date
22-Dec-2008

Buy Standard

EN 1153:1996/AC:2003EN 1153:1996/AC:2003
PreviousNext
Corrigendum
EN 1153:1996/AC:2003
French language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Küchenmöbel - Sicherheitstechnische Anforderungen und Prüfverfahren für eingebaute und freistehende Küchenschränke und ArbeitsplattenMobilier de cuisine - Exigences de sécurité et méthodes d'essais pour meubles de cuisine a fixer et a poser et plans de travailKitchen furni
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 14749:2016+A1:2022(Main + Amendment)
Furniture - Domestic and kitchen storage units and kitchen-worktops - Safety requirements and test methods
SIST EN 14749:2016+A1:2022

This European Standard specifies safety requirements and test methods for all types of kitchen and bathroom storage units and domestic storage furniture and their components.
It does not apply to non-domestic storage, office storage, industrial storage, catering equipment, retail storage and industrial storage lockers.
It does not apply to units covered by EN 71 1, Safety of toys - Part 1: Mechanical and physical properties and EN 60065, Audio, video and similar electronic apparatus - Safety requirements (IEC 60065).
It does not include requirements for the resistance to ageing, degradation, flammability and electrical safety.
Safety that is dependent upon the structure of the building is not included, e.g. the strength of wall hanging units includes only the cabinet and its components including wall attachment devices. The wall and the wall attachments are not included.
Annex A (normative) contains additional test methods.
Annex B (informative) contains a guide to testing of units and components according to this document.
Annex C (informative) contains an example of loading of wall hanging units.
Annex D (informative) contains a method for calculation of vertical and horizontal acting forces.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1116:2018(Main)
Furniture - Kitchen furniture - Coordinating sizes for kitchen furniture and kitchen appliances
SIST EN 1116:2018

This European Standard specifies co-ordinating sizes for kitchen units, worktops, recess panelling, furniture fronts and decorative panels as well as for kitchen appliances (white goods and ovens) and further installation elements, e. g. sinks (abbreviated as "appliances").
It specifies dimensions for the height, the width, the depth and the space to integrate appliances in kitchen units.
This European Standard does not apply to kitchens used commercially (e. g. in hotels, restaurants).

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14749:2016/FprA1(Amendment)
Furniture - Domestic and kitchen storage units and kitchen-worktops - Safety requirements and test methods
SIST EN 14749:2016/kFprA1:2021

This European Standard specifies safety requirements and test methods for all types of kitchen and bathroom storage units and domestic storage furniture and their components.
It does not apply to non-domestic storage, office storage, industrial storage, catering equipment, retail storage and industrial storage lockers.
It does not apply to units covered by EN 71 1, Safety of toys - Part 1: Mechanical and physical properties and EN 60065, Audio, video and similar electronic apparatus - Safety requirements (IEC 60065).
It does not include requirements for the resistance to ageing, degradation, flammability and electrical safety.
Safety that is dependent upon the structure of the building is not included, e.g. the strength of wall hanging units includes only the cabinet and its components including wall attachment devices. The wall and the wall attachments are not included.
Annex A (normative) contains additional test methods.
Annex B (informative) contains a guide to testing of units and components according to this document.
Annex C (informative) contains an example of loading of wall hanging units.
Annex D (informative) contains a method for calculation of vertical and horizontal acting forces.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14749:2016+A1:2022(Main + Amendment)
Furniture - Domestic and kitchen storage units and kitchen-worktops - Safety requirements and test methods
SIST EN 14749:2016+A1:2022

This European Standard specifies safety requirements and test methods for all types of kitchen and bathroom storage units and domestic storage furniture and their components.
It does not apply to non-domestic storage, office storage, industrial storage, catering equipment, retail storage and industrial storage lockers.
It does not apply to units covered by EN 71 1, Safety of toys - Part 1: Mechanical and physical properties and EN 60065, Audio, video and similar electronic apparatus - Safety requirements (IEC 60065).
It does not include requirements for the resistance to ageing, degradation, flammability and electrical safety.
Safety that is dependent upon the structure of the building is not included, e.g. the strength of wall hanging units includes only the cabinet and its components including wall attachment devices. The wall and the wall attachments are not included.
Annex A (normative) contains additional test methods.
Annex B (informative) contains a guide to testing of units and components according to this document.
Annex C (informative) contains an example of loading of wall hanging units.
Annex D (informative) contains a method for calculation of vertical and horizontal acting forces.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13310:2015+A1:2018(Main + Amendment)
Kitchen sinks - Functional requirements and test methods
SIST EN 13310:2015+A1:2018

This European Standard specifies the functional requirements of and test methods for kitchen sinks for domestic purposes, which ensure that the product, when installed in accordance with the manufacturers’ instructions, gives satisfactory performance.
NOTE 1   For the purposes of this standard, the term "domestic purposes" includes use in hotels, accommodation for students, hospitals and similar buildings.
This document does not specify aesthetic requirements and the overall dimensions of kitchen sinks.
It does not apply to industrial kitchen sinks.
NOTE 2   All drawings are examples only; other forms are permissible.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1116:2018(Main)
Furniture - Kitchen furniture - Coordinating sizes for kitchen furniture and kitchen appliances
SIST EN 1116:2018

This European Standard specifies co-ordinating sizes for kitchen units, worktops, recess panelling, furniture fronts and decorative panels as well as for kitchen appliances (white goods and ovens) and further installation elements, e. g. sinks (abbreviated as "appliances").
It specifies dimensions for the height, the width, the depth and the space to integrate appliances in kitchen units.
This European Standard does not apply to kitchens used commercially (e. g. in hotels, restaurants).

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14749:2016/FprA1(Amendment)
Furniture - Domestic and kitchen storage units and kitchen-worktops - Safety requirements and test methods
SIST EN 14749:2016/kFprA1:2021

This European Standard specifies safety requirements and test methods for all types of kitchen and bathroom storage units and domestic storage furniture and their components.
It does not apply to non-domestic storage, office storage, industrial storage, catering equipment, retail storage and industrial storage lockers.
It does not apply to units covered by EN 71 1, Safety of toys - Part 1: Mechanical and physical properties and EN 60065, Audio, video and similar electronic apparatus - Safety requirements (IEC 60065).
It does not include requirements for the resistance to ageing, degradation, flammability and electrical safety.
Safety that is dependent upon the structure of the building is not included, e.g. the strength of wall hanging units includes only the cabinet and its components including wall attachment devices. The wall and the wall attachments are not included.
Annex A (normative) contains additional test methods.
Annex B (informative) contains a guide to testing of units and components according to this document.
Annex C (informative) contains an example of loading of wall hanging units.
Annex D (informative) contains a method for calculation of vertical and horizontal acting forces.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13310:2015/prA1:2017(Amendment)
Kitchen sinks - Functional requirements and test methods
SIST EN 13310:2015/oprA1:2017

This European Standard specifies the functional requirements of and test methods for kitchen sinks for domestic purposes, which ensure that the product, when installed in accordance with the manufacturers’ instructions, gives satisfactory performance.
NOTE 1   For the purposes of this standard, the term “domestic purposes” includes use in hotels, accommodation for students, hospitals and similar buildings.
This document does not specify aesthetic requirements and the overall dimensions of kitchen sinks.
It does not apply to industrial kitchen sinks.
NOTE 2   All drawings are examples only; other forms are permissible.

  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3581:2023(Main)
Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification (ISO 3581:2023)
SIST EN ISO 3581:2023

This document specifies requirements for classification of covered electrodes, based on the all-weld metal chemical composition, the type of electrode covering and other electrode properties, and the all-weld metal mechanical properties, in the as-welded or heat-treated conditions, for manual metal arc welding of stainless and heat-resisting steels.
This document is a combined standard providing for classification utilizing a system based upon classification according to nominal composition or utilizing a system based upon classification according to alloy type.
a)       Paragraphs and tables which carry the label “classification according to nominal composition-A” or “ISO 3581-A” are applicable only to products classified to that system.
b)       Paragraphs and tables which carry the label “classification according to alloy type-B” or “ISO 3581-B” are applicable only to products classified to that system.
c)        Paragraphs and tables which carry neither label are applicable to products classified according to either or both systems.
Annex B gives information on considerations on weld metal ferrite content.

  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11363-1:2018/A1:2023(Amendment)
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
SIST EN ISO 11363-1:2018/A1:2023
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day