EN ISO 1:2002

Geometrical Product Specifications (GPS) - Standard reference temperature for geometrical product specification and verification (ISO 1:2002)

This International Standard specifies the standard reference temperature for geometrical product specifications.

Geometrische Produktspezifikation (GPS) - Referenztemperatur für die geometrische Produktspezifikation und -prüfung (ISO 1:2002)

Diese Internationale Norm legt die Referenztemperatur für geometrische Produktspezifikation und -prüfung fest.

Spécification géométrique des produits (GPS) - Température normale de référence pour la spécification géométrique des produits et vérification (ISO 1:2002)

L'ISO 1 spécifie la température normale de référence pour la spécification géométrique des produits.

Geometrical Product Specifications (GPS) - Standard reference temperature for geometrical product specification and verification (ISO 1:2002)

General Information

• Status: Withdrawn
• Publication Date: 14-Jul-2002
• Withdrawal Date: 27-Sep-2016
• ICS: 17.020 - Metrology and measurement in general
• Technical Committee: CEN/TC 290 - Dimensional and geometrical product specification and verification
• Drafting Committee: CEN/TC 290 - Dimensional and geometrical product specification and verification
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 28-Sep-2016
• Ref Project: SIST EN ISO 1:2004 - Geometrical Product Specifications (GPS) - Standard reference temperature for geometrical product specification and verification (ISO 1:2002)

Relations

• Replaced By: EN ISO 1:2016 - Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties (ISO 1:2016)
• Effective Date: 22-Oct-2014

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2004
Geometrical Product Specifications (GPS) - Standard reference temperature for
geometrical product specification and verification (ISO 1:2002)
Geometrical Product Specifications (GPS) - Standard reference temperature for
geometrical product specification and verification (ISO 1:2002)
Geometrische Produktspezifikation (GPS) - Referenztemperatur für die geometrische
Produktspezifikation und -prüfung (ISO 1:2002)
Spécification géométrique des produits (GPS) - Température normale de référence pour
la spécification géométrique des produits et vérification (ISO 1:2002)
Ta slovenski standard je istoveten z: EN ISO 1:2002
ICS:
17.040.40 6SHFLILNDFLMDJHRPHWULMVNLK Geometrical Product
YHOLþLQL]GHOND*36 Specification (GPS)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2002
ICS 17.040.01
English version
Geometrical Product Specifications (GPS) - Standard reference
temperature for geometrical product specification and
verification (ISO 1:2002)
Spécification géométrique des produits (GPS) - Geometrische Produktspezifikation (GPS) -
Température normale de référence pour la spécification Referenztemperatur für die geometrische
géométrique des produits et vérification (ISO 1:2002) Produktspezifikation und -prüfung (ISO 1:2002)
This European Standard was approved by CEN on 24 June 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1:2002 E
worldwide for CEN national Members.

CORRECTED  2002-07-31
Foreword
This document (ISO 1:2002) has been prepared by Technical Committee ISO/TC 213
"Dimensional and geometrical product specifications and verification" in collaboration with
Technical Committee CEN/TC 290 "Dimensional and geometrical product specification and
verification", the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by January 2003, and conflicting national
standards shall be withdrawn at the latest by January 2003.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of the International Standard ISO 1:2002 has been approved by CEN as a European
Standard without any modifications.
INTERNATIONAL ISO
STANDARD 1
Second edition
2002-07-15
Geometrical Product Specifications
(GPS) — Standard reference temperature
for geometrical product specification and
verification
Spécification géométrique des produits (GPS) — Température normale de
référence pour la spécification géométrique des produits et vérification

Reference number
ISO 1:2002(E)
©
ISO 2002
ISO 1:2002(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2002
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.ch
Printed in Switzerland
ii © ISO 2002 – All rights reserved

ISO 1:2002(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparin
...