iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13523-8:2017

(Main)

Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)

Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)

This part of The EN 13523 series specifies the procedures for determining the resistance to salt spray (fog) of an organic coating on a metallic substrate (coil coating).
For steel, neutral salt spray (fog) is usually used, and for aluminium, acetic acid salt spray (fog).

Bandbeschichtete Metalle - Prüfverfahren - Teil 8: Beständigkeit gegen Salzsprühnebel

Dieser Teil der Normenreihe EN 13523 legt das Verfahren zum Bestimmen der Beständigkeit einer organischen Beschichtung auf einem metallischen Substrat (Bandbeschichtung) gegen Salzsprühnebel fest.
Neutraler Salzsprühnebel wird im Allgemeinen für Stahl benutzt, Essigsäure Salzsprühnebel für Aluminium.

Tôles prélaquées - Méthodes d'essai - Partie 8 : Résistance au brouillard salin

La présente Partie de l’EN 13523 spécifie les modes opératoires à appliquer pour déterminer la résistance au brouillard salin d’un revêtement organique appliqué sur un subjectile métallique (prélaquage).
Pour l’acier, un brouillard salin neutre est généralement utilisé et pour l’aluminium, un brouillard salin d’acide acétique.

Prevlečene kovine, ki se navijajo - Preskusne metode - 8. del: Odpornost proti slani megli

Ta del standarda EN 13523 določa postopke za določanje odpornosti proti slani megli organske prevleke na kovinski podlagi (prevleke kovin, ki se navijajo).
Za jeklo se običajno uporablja nevtralna slana megla, za aluminij pa slana megla ocetne kisline.

General Information

Status
Published
Publication Date
25-Jul-2017
Withdrawal Date
30-Jan-2018
ICS
25.220.60 - Organic coatings
Technical Committee
CEN/TC 139 - Paints and varnishes
Drafting Committee
CEN/TC 139/WG 9 - Testing of coil coated metals
Current Stage
Ref Project
SIST EN 13523-8:2017 - Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)

Relations

Replaces
EN 13523-8:2010 - Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)
Effective Date
02-Aug-2017
Revised
EN 13523-8:2024 - Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)
Effective Date
03-May-2023

Buy Standard

EN 13523-8:2017EN 13523-8:2017
PreviousNext
Standard
EN 13523-8:2017
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bandbeschichtete Metalle - Prüfverfahren - Teil 8: Beständigkeit gegen SalzsprühnebelTôles prélaquées - Méthodes d'essais - Partie 8 : Résistance au brouillard salinCoil coated metals - Test methods - Part 8: Resistance to salt spray (fog)25.220.60Organske prevlekeOrganic coatingsICS:Ta slovenski standard je istoveten z:EN 13523-8:2017SIST EN 13523-8:2017en,fr,de01-december-2017SIST EN 13523-8:2017SLOVENSKI
STANDARDSIST EN 13523-8:20111DGRPHãþD



SIST EN 13523-8:2017



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13523-8
July
t r s y ICS
t wä t t rä x r Supersedes EN
s u w t uæ zã t r s rEnglish Version
Coil coated metals æ Test methods æ Part
zã Resistance to Tôles prélaquées æ Méthodes d 5essais æ Partie
z ã Résistance au brouillard salin
Bandbeschichtete Metalle æ Prüfverfahren æ Teil
zã Beständigkeit gegen Salzsprühnebel This European Standard was approved by CEN on
t s May
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s u w t uæ zã t r s y ESIST EN 13523-8:2017



EN 13523-8:2017 (E) 2 Contents Page European foreword . 3 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 5 4 Principle . 6 5 Apparatus . 7 6 Sampling . 7 7 Test panels . 7 7.1 General . 7 7.2 Option 1 . 8 7.3 Option 2 . 8 8 Procedure. 9 8.1 Test conditions . 9 8.2 Exposure of test panels . 9 8.3 Evaluation . 10 8.3.1 General . 10 8.3.2 Bl
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 13523-23:2023(Main)
Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide
SIST EN 13523-23:2023

This document describes the procedure for determining the resistance of an organic coating on a metallic substrate to humid atmospheres containing sulfur dioxide.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13523-14:2023(Main)
Coil coated metals - Test methods - Part 14: Chalking (Helmen method)
SIST EN 13523-14:2023

This document describes the procedure for determining objectively the chalking resulting from natural or artificial weathering of an organic coating on a metallic substrate.
The advantage of this procedure for measuring chalking of an organic coating is that the result can be read off immediately on an instrument. Subjective judgement by visual comparison of test specimens with reference specimens is not necessary.
Reproducible results can only be obtained by careful execution of the test. Special attention is paid to the adhesive tape and its application to the test surface.
The test method is not applicable to embossed coatings. In the case of textured coatings, the degree of texture will influence readings. Also, dirt collection can influence readings on outdoor weathered specimens.
NOTE   Different methods for assessing chalking are in use. The results of these different methods are not comparable.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13523-26:2022(Main)
Coil coated metals - Test methods - Part 26: Resistance to condensation of water
SIST EN 13523-26:2022

This document specifies a procedure for evaluating the resistance to continuous condensation of an organic coating on a metallic substrate, by means of exposure in a humidity cabinet under controlled conditions.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13523-9:2022(Main)
Coil coated metals - Test methods - Part 9: Resistance to water immersion
SIST EN 13523-9:2022

This document specifies the procedure for determining the resistance to water immersion of an organic coating on a metallic substrate.
The test is applicable to all kinds of organic coatings, including metallics and embossed, textured, pearlescent and printed coatings. The results of the test give an indication of the resistance of the coil coated metal to water.
The method is not intended to reproduce any particular condition of condensation.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13523-25:2022(Main)
Coil coated metals - Test methods - Part 25: Resistance to humidity
SIST EN 13523-25:2022

This document specifies a procedure for evaluating the resistance to humidity of an organic coating on a metallic substrate, by means of exposure in a humidity cabinet under controlled conditions.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13523-2:2021(Main)
Coil coated metals - Test methods - Part 2: Gloss
SIST EN 13523-2:2021

This document specifies the procedure for determining the gloss of an organic coating on a metallic substrate. Gloss is a characteristic of fundamental importance to the appearance of the coil coated product.
The apparatus requires a flat specimen of size greater than the aperture, thus, uneven surfaces cannot be measured.
This method is applicable to all pigmented and unpigmented coatings including metallic/pearlescent coatings. However, for textured coatings it is only indicative.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13523-7:2021(Main)
Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
SIST EN 13523-7:2021

This document specifies the procedure for determining the resistance to cracking of an organic coating on a metallic substrate when bent through 135° to 180°. The degree of adhesion can also be evaluated.
Both folding and mandrel methods are considered. The folding method is more often used for practical purposes but where more precise determinations are required, the mandrel method is the preferred method.
The cylindrical bend method can also be used for a pass/fail decision by using an agreed mandrel.
The choice of the appropriate test method is limited by the thickness and/or the hardness of the substrate.
The feasibility of the test depends on the type and thickness of the substrate. During the procedure, the mandrel is not intended to deform.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13523-3:2021(Main)
Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison
SIST EN 13523-3:2021

This document specifies procedures for determining the instrumental colour difference (CIELAB) of an organic coating on a metallic substrate compared to another one used as a reference (usually called reference) and the metamerism depending on the illuminant.
When two colour specimens have identical spectral reflectance curves, they are matching under any illuminant irrespective of its spectral characteristics. This is termed a “spectral match”. It is also possible for two colour specimens having different spectral reflectance curves to match visually under a given light source but not to match under another light source with different spectral characteristics; such matches are termed “metameric”.
One quantitative description of metamerism is the so-called “metamerism index”.
Information on the metamerism index is of limited value where ΔE (instrumental colour difference for a given illuminant) is > 0,5. The metamerism index is not suited for determining the absolute colour difference or colour consistency of a given specimen at change of illuminant.
The colour difference under the reference illuminant is to be measured in colour coordinates L*, a* and b*.
Excluded from this method are organic coatings producing fluorescence and/or which are multicoloured, pearlescent or metallic.
Establishing a reference as well as the magnitude of an acceptable colour difference are not covered by this method.
Two methods are given in this document:
a)   instrumental colour difference measurement using a tristimulus colourimeter;
b)   instrumental colour difference measurement using a spectrophotometer or equivalent.
It is advised that care is taken when measuring e.g.
—   textured surfaces;
—   fluorescent coatings;
—   metameric coatings;
—   multi-coloured, pearlescent, metallic or special colour effect coatings.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13523-0:2021(Main)
Coil coated metals - Test methods - Part 0: General introduction
SIST EN 13523-0:2021

This document specifies the overall scope of all parts of EN 13523, gives definitions common to all parts and describes how sampling and preparation of test panels for most of the individual test methods are to be carried out.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13523-18:2020(Main)
Coil coated metals - Test methods - Part 18: Resistance to staining
SIST EN 13523-18:2020

This document specifies test procedures for assessing the effect of chemicals on the characteristics of an organic coating on a metallic substrate. It covers testing by using defined substances and to assess the change in characteristics such as discoloration, change in gloss, blistering, softening, swelling and loss of adhesion. Assessment of other phenomena can be agreed between the interested parties

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day