Systems and software engineering - Systems and software product Quality Requirements and Evaluation (SQuaRE) - Common Industry Format (CIF) for usability: General framework for usability-related information (ISO/IEC TR 25060:2010)

ISO/IEC TR 25060:2010 describes a potential family of International Standards, named the Common Industry Formats (CIF), that document the specification and evaluation of the usability of interactive systems. It provides a general overview of the CIF framework and contents, definitions, and the relationship of the framework elements. The intended users of the framework are identified, as well as the situations in which the framework may be applied. The assumptions and constraints of the framework are also enumerated.
The framework content includes the following:
consistent terminology and classification of specification, evaluation and reporting;
a definition of the type and scope of formats and the high-level structure to be used for documenting required information and the results of evaluation.
ISO/IEC TR 25060:2010 is applicable to software and hardware products used for predefined tasks. The information items are intended to be used as part of system-level documentation resulting from development processes such as those in ISO 9241-210, and ISO/IEC JTC 1/SC 7 process standards.
ISO/IEC TR 25060:2010 focuses on documenting those elements needed for design and development of usable systems, rather than prescribing a specific process. It is intended to be used in conjunction with existing International Standards, including ISO 9241, ISO 20282, ISO/IEC 9126 and the SQuaRE series (ISO/IEC 25000 to ISO/IEC 25099).
ISO/IEC TR 25060:2010 does not prescribe any kind of method, life cycle or process.

Ingénierie des systèmes et du logiciel - Exigences de qualité et évaluation des systèmes et du logiciel (SQuaRE) - Format industriel commun (CIF) pour l'utilisabilité: Cadre général pour les informations relatives à l'utilisabilité (ISO/IEC TR 25060:2010)

Sistemi in programska oprema - Zahteve za kakovost in vrednotenje sistemov in programske opreme (SQuaRE) - Skupni industrijski format (CIF) za uporabnost: Splošni okvir za podatke, povezane z uporabnostjo (ISO/IEC TR 25060:2010)

ISO/IEC TR 25060:2010 opisuje potencialno skupino mednarodnih standardov, imenovano CIF (skupni industrijski format), ki zajema specifikacijo in vrednotenje uporabnosti interaktivnih sistemov. Podaja splošen pregled ogrodij in vsebin CIF, definicij in razmerja elementov ogrodja. Določeni so predvideni uporabniki ogrodja in pogoji za morebitno uporabo ogrodja. Poleg tega so naštete predpostavke in omejitve ogrodja.
Vsebina ogrodja vključuje naslednje elemente:
– dosledna terminologija in klasifikacija specifikacije, vrednotenja in poročanja;
– določitev vrste in obsega formatov ter strukturo visoke ravni za uporabo pri dokumentiranju zahtevanih informacij in rezultatov vrednotenja.
ISO/IEC TR 25060:2010 se uporablja za proizvode programske in strojne opreme, ki se uporabljajo za vnaprej določena opravila. Informacijske postavke so namenjene za uporabo kot del dokumentacije na ravni sistema na podlagi razvojnih postopkov, kot so opisani v standardih ISO 9241-210 in ISO/IEC JTC 1/SC 7.
ISO/IEC TR 25060:2010 se osredotoča na dokumentiranje elementov, potrebnih za načrtovanje in razvoj uporabnih sistemov, namesto na predpisovanje posebnega postopka. Namenjen je za uporabo v povezavi z obstoječimi mednarodnimi standardi, vključno s standardi ISO 9241, ISO 20282, ISO/IEC 9126 in skupino standardov SQuaRE (od ISO/IEC 25000 do ISO/IEC 25099).
ISO/IEC TR 25060:2010 ne predpisuje nobene metode, življenjskega cikla ali postopka.

General Information

Status
Withdrawn
Publication Date
11-Apr-2017
Withdrawal Date
18-Apr-2023
Current Stage

Relations

Buy Standard

Technical report
TP CEN ISO/IEC TR 25060:2017
English language
30 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
kTP FprCEN ISO/IEC TR 25060:2017
English language
30 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CEN ISO/IEC TR 25060:2017
01-september-2017
Sistemi in programska oprema - Zahteve za kakovost in vrednotenje sistemov in
programske opreme (SQuaRE) - Skupni industrijski format (CIF) za uporabnost:
Splošni okvir za podatke, povezane z uporabnostjo (ISO/IEC TR 25060:2010)
Systems and software engineering - Systems and software product Quality
Requirements and Evaluation (SQuaRE) - Common Industry Format (CIF) for usability:
General framework for usability-related information (ISO/IEC TR 25060:2010)
Ingénierie des systèmes et du logiciel - Exigences de qualité et évaluation des systèmes
et du logiciel (SQuaRE) - Format industriel commun (CIF) pour l'utilisabilité: Cadre
général pour les informations relatives à l'utilisabilité (ISO/IEC TR 25060:2010)
Ta slovenski standard je istoveten z: CEN ISO/IEC TR 25060:2017
ICS:
35.080 Programska oprema Software
SIST-TP CEN ISO/IEC TR 25060:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TP CEN ISO/IEC TR 25060:2017

---------------------- Page: 2 ----------------------

SIST-TP CEN ISO/IEC TR 25060:2017


CEN ISO/IEC TR 25060
TECHNICAL REPORT

RAPPORT TECHNIQUE

April 2017
TECHNISCHER BERICHT
ICS 35.080
English Version

Systems and software engineering - Systems and software
product Quality Requirements and Evaluation (SQuaRE) -
Common Industry Format (CIF) for usability: General
framework for usability-related information (ISO/IEC TR
25060:2010)
Ingénierie des systèmes et du logiciel - Exigences de
qualité et évaluation des systèmes et du logiciel
(SQuaRE) - Format industriel commun (CIF) pour
l'utilisabilité: Cadre général pour les informations
relatives à l'utilisabilité (ISO/IEC TR 25060:2010)


This Technical Report was approved by CEN on 3 April 2017. It has been drawn up by the Technical Committee CEN/TC 122.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/IEC TR 25060:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TP CEN ISO/IEC TR 25060:2017
CEN ISO/IEC TR 25060:2017 (E)

Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST-TP CEN ISO/IEC TR 25060:2017
CEN ISO/IEC TR 25060:2017 (E)
European foreword
The text of ISO/IEC TR 25060:2010 has been prepared by Technical Committee ISO/IEC JTC 1
“Information technology” of the International Organization for Standardization (ISO) and the
International Electrotechnical Commission (IEC) and has been taken over as CEN ISO/IEC
TR 25060:2017 by Technical Committee CEN/TC 122 “Ergonomics” the secretariat of which is held by
DIN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of ISO/IEC TR 25060:2010 has been approved by CEN as CEN ISO/IEC TR 25060:2017 without
any modification.


3

---------------------- Page: 5 ----------------------

SIST-TP CEN ISO/IEC TR 25060:2017

---------------------- Page: 6 ----------------------

SIST-TP CEN ISO/IEC TR 25060:2017

TECHNICAL ISO/IEC
REPORT TR
25060
First edition
2010-07-15


Systems and software engineering —
Systems and software product Quality
Requirements and Evaluation
(SQuaRE) — Common Industry Format
(CIF) for usability: General framework for
usability-related information
Ingénierie des systèmes et du logiciel — Exigences de qualité et
évaluation des systèmes et du logiciel (SQuaRE) — Format industriel
commun (CIF) pour l'utilisabilité: Cadre général pour les informations
relatives à l'utilisabilité




Reference number
ISO/IEC TR 25060:2010(E)
©
ISO/IEC 2010

---------------------- Page: 7 ----------------------

SIST-TP CEN ISO/IEC TR 25060:2017
ISO/IEC TR 25060:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited u
...

SLOVENSKI STANDARD
kSIST-TP FprCEN ISO/IEC TR 25060:2017
01-februar-2017
[Not translated]
Systems and software engineering - Systems and software product Quality
Requirements and Evaluation (SQuaRE) - Common Industry Format (CIF) for usability:
General framework for usability-related information (ISO/IEC TR 25060:2010)
Ingénierie des systèmes et du logiciel - Exigences de qualité et évaluation des systèmes
et du logiciel (SQuaRE) - Format industriel commun (CIF) pour l'utilisabilité: Cadre
général pour les informations relatives à l'utilisabilité (ISO/IEC TR 25060:2010)
Ta slovenski standard je istoveten z: FprCEN ISO/IEC TR 25060
ICS:
35.080 Programska oprema Software
kSIST-TP FprCEN ISO/IEC TR en,fr,de
25060:2017
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
kSIST-TP FprCEN ISO/IEC TR 25060:2017

---------------------- Page: 2 ----------------------
kSIST-TP FprCEN ISO/IEC TR 25060:2017


FINAL DRAFT
TECHNICAL REPORT
FprCEN ISO/IEC TR
RAPPORT TECHNIQUE
25060
TECHNISCHER BERICHT


December 2016
ICS
English Version

Systems and software engineering - Systems and software
product Quality Requirements and Evaluation (SQuaRE) -
Common Industry Format (CIF) for usability: General
framework for usability-related information (ISO/IEC TR
25060:2010)
Ingénierie des systèmes et du logiciel - Exigences de
qualité et évaluation des systèmes et du logiciel
(SQuaRE) - Format industriel commun (CIF) pour
l'utilisabilité: Cadre général pour les informations
relatives à l'utilisabilité (ISO/IEC TR 25060:2010)


This draft Technical Report is submitted to CEN members for Vote. It has been drawn up by the Technical Committee CEN/TC
122.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a Technical Report. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a Technical Report.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN ISO/IEC TR 25060:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
kSIST-TP FprCEN ISO/IEC TR 25060:2017
FprCEN ISO/IEC TR 25060:2016 (E)
Contents
Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
kSIST-TP FprCEN ISO/IEC TR 25060:2017
FprCEN ISO/IEC TR 25060:2016 (E)
European foreword
The text of ISO/IEC TR 25060:2010 has been prepared by Technical Committee ISO/IEC JTC 1
“Information technology” of the International Organization for Standardization (ISO) and has been
taken over as FprCEN ISO/IEC TR 25060:2016 by Technical Committee CEN/TC 122 “Ergonomics” the
secretariat of which is held by DIN.
This document is currently submitted to the Technical Committee Approval.
Endorsement notice
The text of ISO/IEC TR 25060:2010 has been approved by CEN as FprCEN ISO/IEC TR 25060:2016
without any modification.
3

---------------------- Page: 5 ----------------------
kSIST-TP FprCEN ISO/IEC TR 25060:2017

---------------------- Page: 6 ----------------------
kSIST-TP FprCEN ISO/IEC TR 25060:2017

TECHNICAL ISO/IEC
REPORT TR
25060
First edition
2010-07-15


Systems and software engineering —
Systems and software product Quality
Requirements and Evaluation
(SQuaRE) — Common Industry Format
(CIF) for usability: General framework for
usability-related information
Ingénierie des systèmes et du logiciel — Exigences de qualité et
évaluation des systèmes et du logiciel (SQuaRE) — Format industriel
commun (CIF) pour l'utilisabilité: Cadre général pour les informations
relatives à l'utilisabilité




Reference number
ISO/IEC TR 25060:2010(E)
©
ISO/IEC 2010

---------------------- Page: 7 ----------------------
kSIST-TP FprCEN ISO/IEC TR 25060:2017
ISO/IEC TR 25060:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless th
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.