iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 50160:2010/A3:2019

(Amendment)

Voltage characteristics of electricity supplied by public electricity networks

Voltage characteristics of electricity supplied by public electricity networks

New values for the 15th and 21st harmonic

Merkmale der Spannung in öffentlichen Elektrizitätsversorgungsnetzen

Caractéristiques de la tension fournie par les réseaux publics de distribution

Značilnosti napetosti v javnih razdelilnih omrežjih - Dopolnilo A3

General Information

Status
Published
Publication Date
19-Sep-2019
Withdrawal Date
19-Sep-2022
ICS
29.020 - Electrical engineering in general
Technical Committee
CLC/TC 8X - System aspects of electrical energy supply
Drafting Committee
CLC/TC 8X - System aspects of electrical energy supply
Current Stage
6060 - Document made available - Publishing
Start Date
20-Sep-2019
Due Date
12-Oct-2019
Completion Date
20-Sep-2019
Directive
2016/631 - Commission Regulation (EU) 2016/631 of 14 April 2016 establishing a network code on requirements for grid connection of generators
Mandate
M/490 - Standardisation mandate to the European Standardisation Organisations (ESOs) to support European Smart Grid deployment
Ref Project
SIST EN 50160:2011/A3:2019 - Voltage characteristics of electricity supplied by public electricity networks

Relations

Replaced By
EN 50160:2022 - Voltage characteristics of electricity supplied by public electricity networks
Effective Date
20-Dec-2022
Amends
EN 50160:2010 - Voltage characteristics of electricity supplied by public electricity networks
Effective Date
21-Feb-2017

Buy Standard

EN 50160:2011/A3:2019EN 50160:2011/A3:2019
PreviousNext
Amendment
EN 50160:2011/A3:2019
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-november-2019
Značilnosti napetosti v javnih razdelilnih omrežjih - Dopolnilo A3
Voltage characteristics of electricity supplied by public electricity networks
Merkmale der Spannung in öffentlichen Elektrizitätsversorgungsnetzen
Caractéristiques de la tension fournie par les réseaux publics de distribution
Ta slovenski standard je istoveten z: EN 50160:2010/A3:2019
ICS:
29.240.01 Omrežja za prenos in Power transmission and
distribucijo električne energije distribution networks in
na splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 50160:2010/A3

NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2019
ICS 29.020
English Version
Voltage characteristics of electricity supplied by public electricity
networks
Caractéristiques de la tension fournie par les réseaux Merkmale der Spannung in öffentlichen
publics de distribution Elektrizitätsversorgungsnetzen
This amendment A3 modifies the European Standard EN 50160:2010; it was approved by CENELEC on 2019-03-25. CENELEC members
are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the status of a
national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romani
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 50160:2022(Main)
Voltage characteristics of electricity supplied by public electricity networks
SIST EN 50160:2023

1.1 Application This document specifies the main characteristics of the voltage at a network user's supply terminals in public low voltage, medium, high, and extra-high voltage AC electricity networks under normal operating conditions. This document specifies the limits or values within which the voltage characteristics can be expected to remain at any supply terminal in public European electricity networks, only. Industrial networks are excluded from the scope of EN 50160. NOTE 1 If non-public networks (e.g. residential quarters, energy communities, office centres, shopping centres) have similar end-users as public networks, it is strongly advised to apply the same requirements as for public networks. This document does not apply under abnormal operating conditions, including the following: a) a temporary supply arrangement to keep network users supplied during conditions arising as a result of a fault, maintenance and construction work, or to minimize the extent and duration of a loss of supply; b) in the case of non-compliance of a network user's installation or equipment with the relevant standards or with the technical requirements for connection, established either by the public authorities or the network operator, including the limits for the emission of conducted disturbances; NOTE 2 A network user’s installation can include load and generation. c) in exceptional situations, in particular: 1) exceptional weather conditions and other natural disasters; 2) third party interference; 3) acts by public authorities, 4) industrial actions (subject to legal requirements); 5) force majeure; 6) power shortages resulting from external events. The voltage characteristics given in this document refer to conducted disturbances in public electric power networks. They are not intended to be used as electromagnetic compatibility (EMC) levels or product emission limits. Power quality is related to EMC in several ways – especially because compliance with power quality requirements depends on the control of cumulative effect of electromagnetic emissions from all/multiple equipment and/or installations. Therefore, the voltage characteristics given in this document gives guidance for specifying requirements in equipment product standards and in installation standards. NOTE 3 The performance of equipment might be impaired if it is subjected to supply conditions which are not specified in the equipment product standard. NOTE 4 This document can be superseded in total or in part by the terms of a contract between the individual network user and the network operator. The sharing of complaint management and problem mitigation costs between the involved parties is outside the scope of EN 50160. Measurement methods to be applied in this document are described in EN 61000-4-30. [...]

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62934:2021(Main)
Grid integration of renewable energy generation - Terms and definitions
SIST EN IEC 62934:2021

IEC 62934:2021 provides terms and definitions in the subject area of grid integration of renewable energy generation. The technical issues of grid integration mainly focus on the issues caused by renewable energy generation with variable sources and/or converter based technology, such as wind power and photovoltaic power generation. Some renewable energy generations such as hydro power and biomass power with a relatively continuously available primary energy source and a rotating generator are conventional sources of generation, and are therefore not covered in this document. The intention of this document is to answer the question "what do the words mean" and not "under what conditions do the terms apply".

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50160:2010/A2:2019(Amendment)
Voltage characteristics of electricity supplied by public electricity networks
SIST EN 50160:2011/A2:2019

3 rather small amendments A note 2 will solve the issue of the different approaches in frequency Flagged data idea (IEC TS 62749) will be integrated in EN 50160 A new chapter “Frequency range 2-150kHz” will be integrated

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62559-3:2018(Main)
Use case methodology - Part 3: Definition of use case template artefacts into an XML serialized format
SIST EN IEC 62559-3:2018

IEC 62559-3:2017 defines the core concepts and their serialization into XML syntactic format of a use case template, an Actor list and list for detailed requirements This provides a common XML format for importing/exporting use case information between a variety of modelling software and repositories. For complex systems, the use case methodology supports a common understanding of functionalities, Actors and processes across different technical committees or even different organizations. Developed as software engineering tool, the methodology can be used to support the development of standards as it facilitates the analysis of requirements in relation to new or existing standards. Further arguments for the use case methodology and background information are available in IEC 62559-1. This part of IEC 62559 establishes the interfaces between the different use case repositories and/or UML engineering software tools. Once this level of interoperability is achieved, IEC 62559 can provide a reliable mechanism to interpret those XML data in order to represent graphically UML use cases.

  • Standard
    106 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62559-2:2015(Main)
Use case methodology - Part 2: Definition of the template for use cases, actor list and requirements list
SIST EN 62559-2:2015

IEC 62559-2:2015 defines the structure of a use case template, template lists for actors and requirements, as well as their relation to each other. In this document, a standardized template for the description of use cases is defined for various purposes like the use in standardization organizations for standards development or within development projects for system development. This document was developed for general application in various domains and systems. The energy system/smart grid is used as example in this document as it was one of the first usage areas for this use case template, but this general template can be applied in other usage areas different from energy systems as well (e.g. smart home or electro-mobility). The motivation, background information on use cases, recommendations for the handling of use cases and the processes for the description of use cases inside standardization and in relation to a central use case repository is described in IEC 62559-1. This first edition cancels and replaces IEC PAS 62559:2008 which had been published together with EPRI. Main content of the former PAS will be transferred to the new IEC 62559-4.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50160:2010/A1:2015(Amendment)
Voltage characteristics of electricity supplied by public electricity networks
SIST EN 50160:2011/A1:2015

Amendment to cover Norwegian A-deviation.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CLC/TR 50422:2013(Main)
Guide for the application of the European Standard EN 50160
SIST-TP CLC/TR 50422:2014

The aim of this Technical Report is to provide background information and explanations on EN 50160 with regard to the history of its development as well as to its correct application.

  • Technical report
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
HD 472 S1:1989/AC:2013(Corrigendum)
Nominal voltages for low-voltage public electricity supply systems
SIST HD 472 S1:1996/AC:2014
  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50160:2010/AC:2012(Corrigendum)
Voltage characteristics of electricity supplied by public electricity networks
SIST EN 50160:2011/AC:2013

Corrigendum issued December 2012 (on French version only)

  • Corrigendum
    2 pages
    French language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60038:2011(Main)
CENELEC standard voltages
SIST EN 60038:2011

IEC 60038:2009 specifies standard voltage values which are intended to serve as preferential values for the nominal voltage of electrical supply systems, and as reference values for equipment and system design. This seventh edition supersedes the sixth edition (1993), its Amendment 1 (1994) and its Amendment 2 (1997). It constitutes a technical revision. The significant technical changes are: - the addition of the values of 230 V (50 Hz) and 230/400 V (60 Hz) to Table 1; - the replacement of the utilization voltage range at LV by a reference to the relevant standard and an informative annex; - the addition of the value of 30 kV to Table 3; - the replacement of the value of 1 050 kV by 1 100 kV in Table 5. It has the status of a horizontal standard in accordance with IEC Guide 108.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day