Process measurement and control devices - General methods and procedures for evaluating performance - Part 3: Tests for the effects of influence quantities

IEC 61298-3:2008 specifies general methods and procedures for conducting tests and reporting on the functional and performance characteristics of process measurement and control devices. The tests are applicable to any such devices characterized by their own specific input and output variables, and by the specific relationship (transfer function) between the inputs and outputs, and include analogue and digital devices. For devices that require special tests, this standard should be used, together with any product-specific standard specifying special tests. It covers tests for the effects of influence quantities.

Prozessmess-, -steuer- und -regelgeräte – Allgemeine Methoden und Verfahren für die Bewertung des Betriebsverhaltens – Teil 3: Prüfungen der Auswirkungen von Einflussgrößen

Dispositifs de mesure et de commande de processus - Méthodes et procédures générales d'évaluation des performances - Partie 3: Essais pour la détermination des effets des grandeurs d'influence

La CEI 61298-3:2008 spécifie les méthodes et procédures générales pour l'exécution des essais portant sur les caractéristiques fonctionnelles et les caractéristiques de performance des dispositifs de mesure et de commande de processus. Ces essais sont applicables à tout dispositif à condition que ce dispositif soit caractérisé par ses propres grandeurs d'entrée et de sortie et par la relation spécifique (fonction de transfert) entre les entrées et les sorties. Ils concernent les dispositifs analogiques et numériques. Pour les dispositifs nécessitant des essais spéciaux, il convient que la présente norme soit utilisée en conjonction avec la norme particulière de produit spécifiant ces essais spéciaux. Elle couvre les essais réalisés pour la détermination des effets des grandeurs d'influence.

Naprave za merjenje in nadzor procesa - Splošne metode in postopki za ocenjevanje lastnosti - 3. del: Preskus na učinke vplivnih veličin (IEC 61298-3:2008)

General Information

Status
Published
Publication Date
19-Nov-2008
Withdrawal Date
31-Oct-2011
Current Stage
6060 - Document made available - Publishing
Start Date
20-Nov-2008
Completion Date
20-Nov-2008

Relations

Buy Standard

Standard
EN 61298-3:2009
English language
33 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61298-3:2009
01-september-2009
1DSUDYH]DPHUMHQMHLQQDG]RUSURFHVD6SORãQHPHWRGHLQSRVWRSNL]D
RFHQMHYDQMHODVWQRVWLGHO3UHVNXVQDXþLQNHYSOLYQLKYHOLþLQ ,(&

Process measurement and control devices - General methods and procedures for
evaluating performance -- Part 3: Tests for the effects of influence quantities
Prozessmess-, -steuer- und -regelgeräte – Allgemeine Methoden und Verfahren für die
Bewertung des Betriebsverhaltens – Teil 3: Prüfungen für die Wirkungen von
Einflussgrößen
Dispositifs de mesure et de commande de processus - Méthodes et procédures
générales d'évaluation des performances -- Partie 3: Essais pour la détermination des
effets des grandeurs d'influence
Ta slovenski standard je istoveten z: EN 61298-3:2008
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
SIST EN 61298-3:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61298-3:2009

---------------------- Page: 2 ----------------------

SIST EN 61298-3:2009

EUROPEAN STANDARD
EN 61298-3

NORME EUROPÉENNE
November 2008
EUROPÄISCHE NORM

ICS 25.040.40 Supersedes EN 61298-3:1998


English version


Process measurement and control devices -
General methods and procedures for evaluating performance -
Part 3: Tests for the effects of influence quantities
(IEC 61298-3:2008)


Dispositifs de mesure  Prozessmess-, -steuer- und -regelgeräte -
et de commande de processus - Allgemeine Methoden und Verfahren für
Méthodes et procédures générales die Bewertung des Betriebsverhaltens -
d'évaluation des performances - Teil 3: Prüfungen der Auswirkungen
Partie 3: Essais pour la détermination von Einflussgrößen
des effets des grandeurs d'influence (IEC 61298-3:2008)
(CEI 61298-3:2008)




This European Standard was approved by CENELEC on 2008-11-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61298-3:2008 E

---------------------- Page: 3 ----------------------

SIST EN 61298-3:2009
EN 61298-3:2008 - 2 -
Foreword
The text of document 65B/687/FDIS, future edition 2 of IEC 61298-3, prepared by SC 65B, Devices &
process analysis, of IEC TC 65, Industrial-process measurement, control and automation, was submitted
to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61298-3 on 2008-11-01.
This European Standard supersedes EN 61298-3:1998.
EN 61298-3:2008 is a general revision with respect to EN 61298-3:1998 and does not include any
significant changes (see Introduction).
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-11-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61298-3:2008 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 61298-3:2009
- 3 - EN 61298-3:2008
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.