EN 60838-2-2:2006
(Main)Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules
Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules
This part of IEC 60838-2 applies to connectors for building-in (including those used for interconnection between LED modules) of miscellaneous types to be used with PCB-based LED modules
Sonderfassungen - Teil 2-2: Besondere Anforderungen - Verbinder für LED-Module
Douilles diverses pour lampes - Partie 2-2: Règles particulières - Connecteurs pour modules DEL
Cette partie de la CEI 60838-2 s'applique aux connecteurs intégrés (incluant ceux pour interconnexion entre les modules DEL) des divers types utilisés avec des modules DEL à base circuit imprimé.",PE
Različni okovi žarnic in sijalk – 2-2. del: Posebne zahteve – Konektorji za module LED (IEC 60838-2-2:2006)
Ta del standarda IEC 60838-2 se uporablja za konektorje za vgradnjo (vključno s tipi, ki se uporabljajo za medsebojno povezovanje modulov LEC) različnih tipov, ki se uporabljajo z moduli LED na osnovi PCB.
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60838-2-2:2006
STANDARD
oct 2006
Različni okovi žarnic in sijalk – 2-2. del: Posebne zahteve – Konektorji za
module LED (IEC 60838-2-2:2006)
Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for
LED-modules (IEC 60838-2-2:2006)
ICS 29.140.10 Referenčna številka
SIST EN 60838-2-2:2006(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 60838-2-2
NORME EUROPÉENNE
July 2006
EUROPÄISCHE NORM
ICS 29.140.10; 31.220.10
English version
Miscellaneous lampholders
Part 2-2: Particular requirements -
Connectors for LED-modules
(IEC 60838-2-2:2006)
Douilles diverses pour lampes Sonderfassungen
Partie 2-2: Règles particulières - Teil 2-2: Besondere Anforderungen -
Connecteurs pour modules DEL Verbinder für LED-Module
(CEI 60838-2-2:2006) (IEC 60838-2-2:2006)
This European Standard was approved by CENELEC on 2006-06-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60838-2-2:2006 E
---------------------- Page: 2 ----------------------
EN 60838-2-2:2006 - 2 -
Foreword
The text of document 34B/1229/FDIS, future edition 1 of IEC 60838-2-2, prepared by SC 34B, Lamp caps
and holders, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel
vote and was approved by CENELEC as EN 60838-2-2 on 2006-06-01.
This part 2-2 is to be used in conjunction with the latest edition of EN 60838-1 and its amendments. It was
established on the basis of EN 60838-1:2004.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-03-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-06-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60838-2-2:2006 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 3 ----------------------
- 3 - EN 60838-2-2:2006
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60068-2-6 1995 Environmental testing EN 60068-2-6 1995
+ corr. March 1995 Part 2: Tests - Test Fc: Vibration (sinusoidal)
1)
IEC 60068-2-14 1984 Environmental testing EN 60068-2-14 1999
Part 2: Tests - Test N: Change of temperature
IEC 60068-2-30 2005 Environmental testing EN 60068-2-30 2005
Part 2-30: Tests - Test Db: Damp heat, cyclic
(12 h + 12 h cycle)
1)
EN 60068-2-14 includes A1 to IEC 60068-2-14.
---------------------- Page: 4 ----------------------
NORME CEI
INTERNATIONALE
IEC
60838-2-2
INTERNATIONAL
Première édition
STANDARD
First edition
2006-05
Douilles diverses pour lampes –
Partie 2-2:
Règles particulières –
Connecteurs pour modules DEL
Miscellaneous lampholders –
Part
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.