iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 61046:1994

(Main)

D.C. or a.c. supplied electronic step-down convertors for filament lamps - General and safety requirements

D.C. or a.c. supplied electronic step-down convertors for filament lamps - General and safety requirements

Specifies general and safety requirements for electronic step-down convertors for use on d.c. supplies up to 250 V or a.c. supplies up to 1 000 V at 50 Hz or 60 Hz.

Gleich- oder wechselstromversorgte elektronische Konverter für Glühlampen - Allgemeine und Sicherheits-Anforderungen

Convertisseurs abaisseurs électroniques alimentés en courant continu ou alternatif pour lampes à incandescence - Prescriptions générales et de sécurité

Spécifie les prescriptions générales et de sécurité pour les convertisseurs abaisseurs électroniques pour emploi sur alimentations en courant continu jusqu'à 250 V ou en courant alternatif jusqu'à 1 000 V à 50 Hz ou 60 Hz.

D.C. or a.c. supplied electronic step-down convertors for filament lamps - General and safety requirements

General Information

Status
Withdrawn
Publication Date
01-Nov-1994
Withdrawal Date
14-Jul-1995
ICS
29.140.20 - Incandescent lamps
Technical Committee
CLC/TC 34 - 'Lamps and related equipment
Drafting Committee
IEC/SC 34C - IEC_SC_34C
Parallel Committee
IEC/SC 34C - IEC_SC_34C
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Dec-2006
Completion Date
01-Dec-2006
Directive
2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
73/23/EEC - Electrical equipment designed for use within certain voltage limits
Ref Project
SIST EN 61046:2000 - D.C. or a.c. supplied electronic step-down convertors for filament lamps - General and safety requirements

Relations

Replaced By
EN 61347-2-2:2001 - Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps
Effective Date
29-Jan-2023
Amended By
EN 61046:1994/A1:1996 - D.C. or a.c. supplied electronic step-down convertors for filament lamps - General and safety requirements
Effective Date
28-Jan-2023

Buy Standard

EN 61046:2000EN 61046:2000
PreviousNext
Standard
EN 61046:2000
English language
53 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2000
D.C. or a.c. supplied electronic step-down convertors for filament lamps - General
and safety requirements
D.C. or a.c. supplied electronic step-down convertors for filament lamps - General and
safety requirements
Gleich- oder wechselstromversorgte elektronische Konverter für Glühlampen -
Allgemeine und Sicherheits-Anforderungen
Convertisseurs abaisseurs électroniques alimentés en courant continu ou alternatif pour
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60809:2021/A1:2023(Amendment)
Lamps and light sources for road vehicles - Dimensional, electrical and luminous requirements
SIST EN IEC 60809:2021/A1:2024
  • Amendment
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60809:2021(Main)
Lamps and light sources for road vehicles - Dimensional, electrical and luminous requirements
SIST EN IEC 60809:2021

This document is applicable to electric light sources (see Note 1) for use in automotive applications, for example in road illumination devices and/or light signalling devices for road vehicles. It is especially applicable to light sources listed in UN Resolution R.E.5 and light sources subject to other legislations. This document specifies the technical requirements for interchangeability for example dimensional, electrical and photometrical characteristics, and includes test methods. For the light sources listed in this document, the data sheets are contained either in this document or are included by reference to UN Resolution R.E.5. Performance requirements are specified in IEC 60810, for example life, torsion strength, resistance to vibration and shock. The requirements for miniature light sources for supplementary purposes, not subject to legislation, are specified in IEC 60983. NOTE 1 The terms "lamp" and "light source" are both used in this document to mean the same product, so the two terms are interchangeable throughout this document. NOTE 2 In various vocabularies and standards, different terms are used for "incandescent lamp" (IEC 60050845:1987, 845-07-04), "discharge lamp" (IEC 60050-845:1987, 845-07-17) and "LED lamp". In this document "filament lamp", "discharge lamp" and "LED light source" are used, however, where only "lamp" or "light source" is written, all light sources, independent of the technology used, are meant, unless the context clearly shows that it applies to one kind of technology only. In the UN Regulations, the word "light source" is used for the products specified in this document. NOTE 3 Wherever the term "device" is used, it is meant to designate equipment which is used as a luminaire. It can for instance take the form and purpose of a headlight or signal light.

  • Standard
    97 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62504:2014/A1:2018(Amendment)
General lighting - Light emitting diode (LED) products and related equipment - Terms and definitions
SIST EN 62504:2014/A1:2018

Second CDV circulated to follow IEC

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60357:2003/A11:2016(Amendment)
Tungsten halogen lamps (non-vehicle) - Performance specifications
SIST EN 60357:2004/A11:2016

This International Standard specifies the performance requirements for single-capped and double-capped tungsten halogen lamps, having rated voltages of up to 250 V, used for the following applications: · Projection (including cinematograph and still projection) · · Photographic (including studio) · · Floodlighting · · Special purpose · · General purpose · · Stage lighting This third edition cancels and replaces the second edition published in 1982 and amendments 1(1984), 2(1985), 3(1987), 4(1989), 5(1992), 6(1993), 7(1994), 8(1995), 9(1996), 10(1996), 11(1997), 12(1999) and 13(2000

  • Amendment
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60630:1998/A7:2015(Amendment)
Maximum lamp outlines for incandescent lamps
SIST EN 60630:2001/A7:2015
  • Amendment
    13 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60432-3:2013(Main)
Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle)
SIST EN 60432-3:2013

IEC 60432-3:2012 specifies the safety requirements for single-capped and double-capped tungsten halogen lamps, having rated voltages of up to 250 V, used for the following applications: - projection (including cinematograph and still projection), - photographic (including studio), - floodlighting, - special purpose, - general purpose, - stage lighting. This second edition of IEC 60432-3 cancels and replaces the first edition published in 2002, Amendment 1 (2005) and Amendment 2 (2008). The main changes with respect to the previous edition are as follows: - adapting the cold fill pressure requirements and tests for self-shielded lamps to the state of the technology, - introduction of requirements to fully cover photobiological safety according to IEC 62471.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61549:2003/A3:2012(Amendment)
Miscellaneous lamps
SIST EN 61549:2004/A3:2013

This International Standard specifies lamps, or information relevant to lamps, not given elsewhere in existing IEC lamp standards. It covers both safety and performance aspects.

  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60432-2:2000/A2:2012(Amendment)
Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes
SIST EN 60432-2:2000/A2:2012

This part of IEC 60432 specifies the safety and the related interchangeability requirements of tungsten halogen lamps for general lighting service. It covers those tungsten halogen lamps that are used as direct replacements for conventional tungsten filament lamps as well as new tungsten halogen lamps which have no correspondence in IEC 60432-1, but for which the safety and interchangeability requirements are treated by this standard in conjunction with IEC 60432-1. These tungsten halogen lamps have the following characteristics:
– rated wattage up to and including 250 W;
– rated voltage of 50 V to 250 V inclusive;
– caps B15d, B22d, E12, E14, E17, E26, E26d, E26/5039, E27 or E27/5139.
This standard also covers single-ended lamps, within the above ratings, which are not direct
replacements for conventional tungsten filament lamps, but serve the same purpose.
NOTE 1 There is no implication that a tungsten halogen lamp used as a substitute for an incandescent tungsten filament lamp would use the same bulb shape as the original incandescent lamp. NOTE 2 There are two variations of E26 caps which are not fully compatible. E26/24 caps are used in North merica and E26/25 caps are used in Japan.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60432-1:2000/A2:2012(Amendment)
Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes
SIST EN 60432-1:2000/A2:2012

International Standard IEC 60432-1 specifies the safety and interchangeability requirements of
tungsten filament incandescent lamps for general lighting service having:
– rated wattage up to and including 200 W;
– rated voltage of 50 V to 250 V inclusive;
– bulbs of the A, B, C, G, M, P, PS, PAR or R shapes* , or other bulb shapes where the lamps
are intended to serve the same purpose as lamps with the foregoing bulb shapes;
– bulbs with all kinds of finishes;
– caps B15d, B22d, E12, E14, E17, E26** , E26d, E26/5039, E27 or E27/5139.
As far as is reasonably practicable, this standard is also applicable to lamps with bulbs and caps other than those mentioned above, but which serve the same purpose. This standard specifies the method a manufacturer should use to show that his product conforms to this standard on the basis of whole production appraisal in association with his test records on finished products. This method can also be applied for certification purposes. Details of a batch test procedure which can be used to make limited assessment of batches are also given. This standard is concerned with safety criteria only and does not take into account the performance of tungsten filament lamps with respect to luminous flux, life or power consumption characteristics. Readers should refer to IEC 60064 for such characteristics with respect to types normally used for general lighting service.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61341:2011(Main)
Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
SIST EN 61341:2011

IEC/TR 61341:2010 describes the method of measuring and specifying the centre beam intensity and the associated beam angle(s) of reflector lamps. It applies to: - incandescent, - tungsten halogen, - gas-discharge and LED based reflector lamps for general lighting purposes. It does not apply to lamps for special purposes such as projection lamps. This second edition cancels and replaces the first edition published in 1994 and constitutes a technical revision. Due to the increasing use of reflector equipped LED lamps, the scope has been broadened and measurement conditions been included in order to take account of these lamps. Further, for easier understanding of the relation between the different axis and different intensities, two figures have been added. The luminous intensity distribution shall be reported instead of the centre beam intensity, if the latter is very low ("butterfly" distributions).

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day