EN 61000-4-10:2017
(Main)Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test
Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test
IEC 61000-4-10:2016 is available as IEC 61000-4-10:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 61000-4-10:2016 specifies the immunity requirements, test methods, and range of recommended test levels for equipment subjected to damped oscillatory magnetic disturbances related to medium voltage and high voltage sub-stations. This second edition cancels and replaces the first edition published in 1993 and Amendment 1:2000. This edition constitutes a technical revision.
Elektromagnetische Verträglichkeit (EMV) - Teil 4-10: Prüf- und Messverfahren - Prüfung der Störfestigkeit gegen gedämpft schwingende Magnetfelder
Compatibilité électromagnétique (CEM) - Partie 4-10: Techniques d'essai et de mesure - Essai d'immunité du champ magnétique oscillatoire amorti
L'IEC 61000-4-10:2016 spécifie les exigences en matière d'immunité, les méthodes d'essai et la plage des niveaux d'essai recommandés des équipements soumis aux perturbations magnétiques oscillatoires amorties dans les postes moyenne et haute tension. Cette deuxième édition annule et remplace la première édition parue en 1993 et l'Amendement 1:2000. Cette édition constitue une révision technique.
Elektromagnetna združljivost (EMC) - 4-10. del: Preskusne in merilne tehnike - Preskus odpornosti proti magnetnemu polju dušenega nihanja
Ta del standarda IEC 61000 določa zahteve glede odpornosti, preskusne metode in obseg priporočenih preskusnih ravni za opremo, izpostavljeno motnjam zaradi magnetnega polja dušenega nihanja v povezavi s srednje- in visokonapetostnimi razdelilnimi transformatorskimi postajami.
V tem standardu opredeljen preskus se uporablja za opremo, ki je namenjena za vgradnjo na lokacijah, izpostavljenih temu pojavu, kot je določeno v točki 4.
Ta standard ne določa motenj zaradi kapacitivnih ali induktivnih spojk v kablih ali drugih delih inštalacije. Te vidike zajema standard IEC 61000-4-18, ki obravnava prevajane motnje.
Namen tega standarda je določiti skupno in ponovljivo osnovo za vrednotenje zmogljivosti električne ter elektronske opreme za srednje- in visokonapetostne razdelilne transformatorske postaje, izpostavljene motnjam zaradi magnetnih polj dušenega nihanja.
Preskus se v glavnem uporablja za elektronsko opremo, predvideno za vgradnjo v visokonapetostne razdelilne transformatorske postaje.
Ta standard se lahko uporablja tudi za elektrarne, stikalne naprave in sisteme v pametnih omrežjih v skladu z odločitvami tehničnih odborov.
OPOMBA: To je osnovna objava o elektromagnetni združljivosti, ki jo uporabljajo tehnični odbori v okviru Mednarodne elektrotehniške komisije (IEC), kot je opisano v vodilu 107 Mednarodne elektrotehniške komisije.
Poleg tega je v vodilu 107 navedeno, da so tehnični odbori v okviru Mednarodne elektrotehniške komisije odgovorni za določitev morebitne uporabe tega standarda s preskusom odpornosti, v primeru uporabe pa so odgovorni za določitev ustreznih preskusnih ravni in meril učinkovitosti. Odbor TC 77 in njegovi pododbori so pripravljeni za sodelovanje s tehničnimi odbori pri vrednotenju posameznih preskusnih ravni odpornosti za ustrezne izdelke.
Ta standard določa:
– obseg preskusnih ravni;
– opremo za preskušanje;
– postavitev za preskušanje;
– preskusne postopke.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2017
1DGRPHãþD
SIST EN 61000-4-10:1997
SIST EN 61000-4-10:1997/A1:2002
Elektromagnetna združljivost (EMC) - 4-10. del: Preskusne in merilne tehnike -
Preskus odpornosti proti magnetnemu polju dušenega nihanja
Electromagnetic Compatibilty (EMC) - Part 4-10: Testing and measurement techniques -
Damped oscillatory magnetic field immunity test
Ta slovenski standard je istoveten z: EN 61000-4-10:2017
ICS:
33.100.20 Imunost Immunity
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 61000-4-10
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2017
ICS 33.100.20 Supersedes EN 61000-4-10:1993
English Version
Electromagnetic compatibility (EMC) -
Part 4-10: Testing and measurement techniques - Damped
oscillatory magnetic field immunity test
(IEC 61000-4-10:2016)
Compatibilité électromagnétique (CEM) - Elektromagnetische Verträglichkeit (EMV) -
Partie 4-10: Techniques d'essai et de mesure - Essai Teil 4-10: Prüf- und Messverfahren - Prüfung der
d'immunité du champ magnétique oscillatoire amorti Störfestigkeit gegen gedämpft schwingende Magnetfelde
(IEC 61000-4-10:2016) (IEC 61000-4-10:2016)
This European Standard was approved by CENELEC on 2016-08-11. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61000-4-10:2017 E
European foreword
The text of document 77B/730/CDV, future edition 2 of IEC 61000-4-10, prepared by SC 77B “High
frequency phenomena” of IEC/TC 77 “Electromagnetic compatibility" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61000-4-10:2017.
The following dates are fixed:
(dop) 2017-08-24
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2020-02-24
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61000-4-10:1993.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61000-4-10:2016 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61000-4-18 NOTE Harmonized as EN 61000-4-18.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year
IEC 60050 Series International Electrotechnical Vocabulary - -
(IEV)
IEC 61000-4-10 ®
Edition 2.0 2016-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
BASIC EMC PUBLICATION
PUBLICATION FONDAMENTALE EN CEM
Electromagnetic compatibility (EMC) –
Part 4-10: Testing and measurement techniques – Damped oscillatory magnetic
field immunity test
Compatibilité électromagnétique (CEM) –
Partie 4-10: Techniques d'essai et de mesure – Essai d'immunité du champ
magnétique oscillatoire amorti
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.100.20 ISBN 978-2-8322-3501-0
– 2 – IEC 61000-4-10:2016 IEC 2016
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope and object . 8
2 Normative references. 8
3 Terms, definitions and abbreviated terms . 9
3.1 Terms and definitions . 9
3.2 Abbreviations . 10
4 General . 10
5 Test levels . 10
6 Test instrumentation . 11
6.1 General . 11
6.2 Damped oscillatory wave generator . 11
6.2.1 General . 11
6.2.2 Performance characteristics of the generator connected to the
standard induction coil . 12
6.3 Standard induction coil . 14
6.4 Calibration of the test system . 14
7 Test setup . 15
7.1 Test equipment . 15
7.2 Verification of the test instrumentation . 15
7.3 Test setup for table-top EUT . 16
7.4 Test setup for floor standing EUT . 16
7.5 Test setup for damped oscillatory field applied in-situ . 18
8 Test procedure . 18
8.1 General . 18
8.2 Laboratory reference conditions . 18
8.2.1 Climatic conditions . 18
8.2.2 Electromagnetic conditions . 18
8.3 Execution of the test . 19
9 Evaluation of test results . 19
10 Test report. 20
Annex A (informative) Information on the field distribution of standard induction coils . 21
A.1 General . 21
A.2 Determination of the coil factor . 21
A.2.1 General . 21
A.2.2 Coil factor calculation . 21
A.3 1 m × 1 m standard induction coil . 22
A.4 1 m × 2,6 m standard induction coil with reference ground plane . 23
A.5 1 m × 2,6 m standard induction coil without reference ground plane . 24
Annex B (informative) Selection of the test levels . 26
Annex C (informative) Damped oscillatory magnetic field frequency . 28
Annex D (informative) Measurement uncertainty (MU) considerations . 29
D.1 General . 29
D.2 Legend . 29
IEC 61000-4-10:2016 IEC 2016 – 3 –
D.3 Uncertainty contributors to the peak current and to the damped oscillatory
magnetic field measurement uncertainty . 29
D.4 Uncertainty of peak current and damped oscillatory magnetic field calibration . 30
D.4.1 General . 30
D.4.2 Peak current . 30
D.4.3 Further MU contributions to amplitude and time measurements . 32
D.4.4 Rise time of the step response and bandwidth of the frequency
response of the measuring system . 32
D.4.5 Impulse peak distortion due to the limited bandwidth of the measuring
system . 33
D.5 Application of uncertainties in the damped oscillatory wave generator
compliance criterion . 34
Annex E (informative) 3D numerical simulations . 35
E.1 General . 35
E.2 Simulations . 35
E.3 Comments . 35
Bibliography . 41
Figure 1 – Simplified schematic circuit of the test generator for damped oscillatory
magnetic field . 12
Figure 2 – Waveform of short-circuit current in the standard coils . 13
Figure 3 – Waveform of short-circuit current showing the repetition time T . 13
rep
Figure 4 – Example of a current measurement of standard induction coils . 14
Figure 5 – Example of test setup for table-top equipment . 16
Figure 6 – Example of test setup for floor standing equipment showing the horizontal
orthogonal plane . 17
Figure 7 – Example of test setup for floor standing equipment showing the vertical
orthogonal plane . 17
Figure 8 – Example of test setup using the proximity method . 18
Figure A.1 – Rectangular induction coil with sides a +
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.