EN 60384-19:2006
(Main)Fixed capacitors for use in electronic equipment - Part 19: Sectional specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors
Fixed capacitors for use in electronic equipment - Part 19: Sectional specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors
is applicable to fixed surface mount capacitors for direct current, with metallized electrodes and polyethylene-terephthalate dielectric for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted direct onto substrates for hybrid circuits or onto printed boards. These capacitors may have 'self-healing properties' depending on conditions of use. They are primarily intended for applications where the a.c. component is small with respect to the rated voltage.
Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 19: Rahmenspezifikation - Oberflächenmontierbare Gleichspannungs-Kondensatoren mit metallisierter Polyethylen-Terephtalat-Folie als Dielektrikum
Condensateurs fixes utilisés dans les équipements électroniques - Partie 19: Spécification intermédiaire - Condensateurs fixes chipses pour courant continu à diélectrique en film de polytéréphtalate d'éthylène métallisé
La CEI 60384-19:2006 s'applique aux condensateurs fixes pour courant continu à électrodes métallisées et à diélectrique en polyéthylène téréphtalate destinés aux équipements électroniques. Ces condensateurs sont équipés de contacts de connexion métallisés ou de bandes de brasure et sont destinés à être montés directement sur des substrats pour circuits hybrides ou sur des cartes imprimées. Ces condensateurs peuvent avoir des propriétés "auto-cicatrisantes" en fonction des conditions d'utilisation. Ils sont principalement destinés à des applications dans lesquelles la composante alternative est petite par rapport à la tension assignée. La Norme internationale CEI 60384-19 a été établie par le comité d'études 40: Condensateurs et résistances pour équipements électroniques. Cette deuxième édition annule et remplace la première édition parue en 1993. Elle constitue des révisions mineures des tableaux, valeurs et références.
Nespremenljivi kondenzatorji za elektronsko opremo – 19. del: Sektorska specifikacija – Nespremenljivi kondenzatorji za enosmerni tok za površinsko montažo s pokovinjenim polietilen-tereftalatnim dielektrikom (IEC 60384-19:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60384-19:2006
STANDARD
julij 2006
Nespremenljivi kondenzatorji za elektronsko opremo – 19. del: Sektorska
specifikacija – Nespremenljivi kondenzatorji za enosmerni tok za površinsko
montažo s pokovinjenim polietilen-tereftalatnim dielektrikom (IEC 60384-
19:2006)
Fixed capacitors for use in electronic equipment – Part 19: Sectional specification –
Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c.
capacitors (IEC 60384-19:2006)
ICS 31.060.10 Referenčna številka
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
EUROPEAN STANDARD
EN 60384-19
NORME EUROPÉENNE
March 2006
EUROPÄISCHE NORM
ICS 31.060.30
English version
Fixed capacitors for use in electronic equipment
Part 19: Sectional specification -
Fixed metallized polyethylene-terephthalate film dielectric
surface mount d.c. capacitors
(IEC 60384-19:2006)
Condensateurs fixes utilisés Festkondensatoren zur Verwendung
dans les équipements électroniques in Geräten der Elektronik
Partie 19: Spécification intermédiaire - Teil 19: Rahmenspezifikation -
Condensateurs fixes chipses Oberflächenmontierbare
pour courant continu à diélectrique en film Gleichspannungs-Kondensatoren
de polytéréphtalate d'éthylène métallisé mit metallisierter Polyethylen-Terephtalat-
(CEI 60384-19:2006) Folie als Dielektrikum
(IEC 60384-19:2006)
This European Standard was approved by CENELEC on 2006-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60384-19:2006 E
EN 60394-19:2006 - 2 -
Foreword
The text of document 40/1622/FDIS, future edition 2 of IEC 60384-19, prepared by IEC TC 40, Capacitors
and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 60384-19 on 2006-02-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-11-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-02-01
This European Standard makes reference to International Standards. Where the International Standard
referred to has been endorsed as a European Standard or a home-grown European Standard exists, this
European Standard shall be applied instead. Pertinent information can be found on the CENELEC web
site.
__________
Endorsement notice
The text of the International Standard IEC 60384-19:2006 was approved by CENELEC as a European
Standard without any modification.
__________
INTERNATIONAL IEC
STANDARD 60384-19
QC 302200
Second edition
2006-01
Fixed capacitors for use in electronic equipment –
Part 19:
Sectional specification –
Fixed metallized polyethylene-terephthalate film
dielectric surface mount d.c. capacitors
IEC 2006 Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale T
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue
– 2 – 60384-19 IEC:2006(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –
Part 19: Sectional specification – Fixed metallized polyethylene-
terephthalate film dielectric surface mount d.c. capacitors
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60384-19 has been prepared by technical committee 40:
Capacitors and resistors for electronic equipment.
This second edition cancels and replaces the first edition published in 1993 and constitutes
minor revisions related to tables, figures and references.
The text of this standard is based on the following documents:
FDIS Report on voting
40/1622/FDIS 40/1645/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
60384-19 IEC:2006(E) – 3 –
IEC 60384 consists of the following parts, under the general title Fixed capacitors for use in
electronic equipment:
Part 1: Generic specification
Part 2: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric
d.c. capacitors
Part 3: Sectional specification: Fixed tantalum surface mount capacitors
Part 4: Sectional specification: Aluminium electrolytic capacitors with solid and non-solid
electrolyte
Part 5: Sectional specification: Fixed mica dielectric d.c. capacitors with a rated voltage
not exceeding 3000 V - Selection of methods of test and general requirements
Part 6: Sectional specification: Fixed metallized polycarbonate film dielectric d.c.
capacitors
Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1
Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2
Part 11: Sectional specification: Fixed polyethylene-terephthalate film dielectric metal foil
d.c. capacitors
Part 12: Sectional specification: Fixed polycarbonate film dielectric metal foil d.c.
capacitors
Part 13: Sectional specification: Fixed polypropylene film dielectric metal foil d.c.
capacitors
Part 14: Sectional specification: Fixed capacitors for electromagnetic interference
suppression and connection to the supply mains
Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid
electrolyte
Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c.
capacitors
Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and
pulse capacitors
Part 18: Sectional specification: Fixed aluminium electrolytic surface mount capacitors with
solid and non-solid electrolyte
Part 19: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric
surface mount d.c. capacitors
Part 20: Sectional specification: Fixed metallized polyphenylene sulfide film dielectric
surface mount d.c. capacitors
Part 21: Sectional specification: Fixed surface mount multilayer capacitors of ceramic
dielectric, Class 1
Part 22: Sectional specification: Fixed surface mount multilayer capacitors of ceramic
dielectric, Class 2
Part 23: Sectional specification - Fixed surface mount metallized polyethylene naphthalate
film dielectric DC capacitors
Part 24: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with
conductive polymer solid electrolyte
Part 25: Sectional specification - Surface mount fixed aluminium electrolytic capacitors
with conductive polymer solid electrolyte
All sectional specifications mentioned above do have one or more blank detail specifications
being a supplementary document, containing requirements for style, layout and minimum
content of detail specifications.
———————
To be published.
– 4 – 60384-19 IEC:2006(E)
The QC number that appears on the front cover of this publication is the specification number
in the IECQ Quality Assessment System for Electronic Components.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
A bilingual edition of this sectional specification may be issued at a later date.
60384-19 IEC:2006(E) – 5 –
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –
Part 19: Sectional specification – Fixed metallized polyethylene-
terephthalate film dielectric surface mount d.c. capacitors
1 General
1.1 Scope
This part of IEC 60384 is applicable to fixed surface mount capacitors for direct current, with
metallized electrodes and polyethylene-terephthalate dielectric for use in electronic
equipment. These capacitors have metallized connecting pads or soldering strips and are
intended to be mounted direct onto substrates for hybrid circuits or onto printed boards.
These capacitors may have "self-healing properties" depending on conditions of use. They
are primarily intended for applications where the a.c. component is small with respect to the
rated voltage.
Capacitors for electromagnetic interference suppression are not included but are covered by
IEC 60384-14.
1.2 Object
The object of this standard is to prescribe preferred ratings and characteristics and to select
from IEC 60384-1:1999, the appropriate quality assessment procedures, tests and measuring
methods and to give general performance requirements for this type of capacitor. Test
severities and requirements prescribed in detail specifications referring to this sectional
specification shall be of equal or higher performance level, because lower performance levels
are not permitted.
1.3 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC 60063:1963, Preferred number series for resistors and capacitors
Amendment 1 (1967)
Amendment 2 (1977)
IEC 60068-1, Environmental testing – Part 1: General and guidance
IEC 60384-1, Fixed capacitors for use in electronic equipment – Part 1: Generic specification
IEC 60410, Sampling plans and procedures for inspection by attributes
ISO 3, Preferred numbers – Series of preferred numbers
1.4 Inf
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.