EN IEC 62115:2020/A12:2026
(Amendment)Electric toys - Safety
- Abstract
The standard deals with safety requirements for electric toys that have at least one function dependant on electricity, electric toys being any product designed or intended, whether or not exclusively, for use in play by children under 14 years of age.
- Status
- Not Published
- Publication Date
- 10-Dec-2026
- Technical Committee
- CLC/TC 61 - Safety of household and similar electrical appliances
- Drafting Committee
- CLC/TC 61/WG 07 - Toys
- Current Stage
- 6055 - Ratification Completed (DOR) - Publishing
- Start Date
- 05-Aug-2026
- Due Date
- 19-Jan-2027
- Completion Date
- 05-Aug-2026
EN IEC 62115:2020/A12:2026 is a CENELEC amendment to EN IEC 62115:2020 for the safety of electric toys. It covers toys that have at least one function dependent on electricity and are designed or intended for play by children under 14 years of age. The amendment updates selected clauses, annexes and references so the toy safety requirements stay aligned with current battery, charger, control, marking and EMC standards.
What does EN IEC 62115:2020/A12:2026 specify?
EN IEC 62115:2020/A12:2026 specifies changes to the European electric-toy safety standard rather than a completely new standalone document. It supplements and modifies EN IEC 62115:2020, and it is read together with EN IEC 62115:2020, EN IEC 62115:2020/A11:2020 and EN IEC 62115:2020/FprA1:2025.
The amendment is organized as updates to the introduction, scope, normative references, general test conditions, markings, construction, components, annexes and bibliography. It also contains Annex ZA on normative references, Annex ZB with background and rationale, and Annex ZZ on the link to Directive 2009/48/EC.
| Annex | What it covers |
|---|---|
| Annex B | Needle flame test |
| Annex C | Automatic controls and switches |
| Annex D | Electric toys with protective electronic circuits |
| Annex E | Safety of electric toys incorporating optical radiation sources |
| Annex I | Electric toys generating electromagnetic fields |
| Annex ZA | Normative references and corresponding European publications |
| Annex ZB | Background and rationale |
| Annex ZZ | Relationship with Directive 2009/48/EC |
What are the key requirements of EN IEC 62115:2020/A12:2026?
EN IEC 62115:2020/A12:2026 mainly updates the reference documents and the way existing safety checks are applied. In practice, manufacturers and test labs need to use the newer referenced standards named in the amendment when they assess batteries, chargers, controls, markings, construction details and electromagnetic or optical hazards.
Updated references for batteries and toys
Clause 2 replaces older battery-related references with EN 62133-1:2017 and EN 62133-2:2017, and adds EN 71-1:2014+A1:2018. That matters because rechargeable cells are now tied to chemistry-specific safety standards, and toy mechanical and physical properties are aligned with EN 71-1.
Test conditions and markings
Clause 5 updates general test conditions so the battery-related references point to EN 62133-1 or EN 62133-2. Clause 7 updates the marking provisions and points users to the toy-marking guidance linked to Directive 2009/48/EC. For a manufacturer, this affects both test planning and the wording and placement of labels and instructions.
Construction and components
Clause 13 updates construction references to EN 71-1, EN IEC 60335-1:2023 and EN IEC 60086-2:2021. Clause 15 updates component references to EN 62133-1 or EN 62133-2, EN IEC 61558-2-6:2025, EN IEC 61558-2-7:2025, EN IEC 61558-2-16:2025 and EN IEC 60335-2-29:2021. In practice, this affects battery compartments, chargers, transformers and other supplied parts.
Electrical spacing and annex methods
Clause 17 replaces its clearance and creepage references with EN IEC 60335-1:2023. Annexes B, C, D, E and I also update the standards used for needle flame, automatic controls, protective electronic circuits, optical radiation sources and electromagnetic fields. That means the supporting test methods used for compliance stay tied to current European test standards.
EU legal linkage
Annex ZZ maps parts of the standard to Directive 2009/48/EC. When cited in the Official Journal of the European Union, the normative clauses listed in that annex provide a route to presumption of conformity within the scope of the standard.
What terms does EN IEC 62115:2020/A12:2026 define?
- Electric toy - A product intended for play by children under 14 years of age, where at least one function depends on electricity.
- CENELEC - The European Committee for Electrotechnical Standardization, which prepares European electrotechnical standards.
- CLC/TC 61 - The CENELEC technical committee that prepared this amendment, covering safety of household and similar electrical appliances.
- Normative reference - A referenced document whose requirements become part of the standard when cited in the text.
- Annex ZZ - The annex that links this European standard to Directive 2009/48/EC.
- Presumption of conformity - The legal effect described in Annex ZZ when the standard is cited in the Official Journal of the European Union.
Who uses EN IEC 62115:2020/A12:2026?
EN IEC 62115:2020/A12:2026 is used by toy manufacturers, component suppliers, test laboratories, conformity assessment bodies, importers and regulatory teams. They use it to design electric toys, select batteries and chargers, plan safety tests, prepare markings and instructions, and support EU toy-safety compliance work.
What changed in EN IEC 62115:2020/A12:2026 from the previous edition?
EN IEC 62115:2020/A12:2026 amends EN IEC 62115:2020. The foreword states one significant technical modification: the date reference is updated.
The amendment also updates:
- the scope note references for transformers and battery chargers
- the normative references in Clause 2
- the battery-related test condition in Clause 5
- the marking text and references in Clause 7
- the construction references in Clause 13
- the component references in Clause 15
- the clearance and creepage reference in Clause 17
- the references used in Annexes B, C, D, E and I
- the bibliography and the EU-related annexes
Which standards are used with EN IEC 62115:2020/A12:2026?
| Standard | Contribution to EN IEC 62115:2020/A12:2026 |
|---|---|
| EN 62133-1:2017 | Safety requirements for nickel rechargeable cells and batteries used in portable applications |
| EN 62133-2:2017 | Safety requirements for lithium rechargeable cells and batteries used in portable applications |
| EN 71-1:2014+A1:2018 | Mechanical and physical properties of toys |
| EN IEC 60335-1:2023 | General appliance safety requirements used in construction and spacing checks |
| EN IEC 60335-2-29:2021 | Safety of battery chargers |
| EN IEC 61558-2-7:2025 | Transformers and power supply units for toys |
| EN IEC 61558-2-16:2025 | Switch mode power supply units and related transformers |
| EN IEC 60730-1:2024 | Automatic controls used in Annex C |
| EN IEC 61058-1:2018 | Appliance switches used in Annex C |
| EN IEC 60825-1:2014 | Safety of laser products used for optical radiation sources |
| EN 62233:2008 | Measurement of electromagnetic fields for toys generating EMF |
| EN 60695-11-5:2017 | Needle flame test method used in Annex B |
| IEC 61000-4 series / EN IEC 61000-4 series | EMC immunity test methods |
| ISO 7010, ISO 3864-1, ISO 7000, IEC 60417 | Safety signs and graphical symbols used for markings |
What does the EN IEC 62115:2020/A12:2026 document contain?
EN IEC 62115:2020/A12:2026 contains clause-by-clause amendment text, not a full rewrite of the toy standard. It updates references and wording in the introduction, scope, test conditions, markings, construction, components and annexes.
It also contains Annex ZA, which lists the normative references and their European equivalents, and Annex ZZ, which gives the correspondence with Directive 2009/48/EC in Table ZZ.1. Annex ZB explains the rationale for selected changes, including USB connector testing, markings for batteries and transformers, abnormal operation, water and liquid-related tests, mechanical strength, construction and component safety.
The document is therefore most useful when you already work with EN IEC 62115 and need the latest amendment text for design checks, laboratory testing, certification work or EU toy-safety documentation.
Relations
- Effective Date
- 22-Oct-2024
- Effective Date
- 27-Aug-2024
Get Certified
Connect with accredited certification bodies for this standard
CIS Institut d.o.o.
Personal Protective Equipment (PPE) certification body. Notified Body NB-2890 for EU Regulation 2016/425 PPE.

Kiwa BDA Testing
Building and construction product certification.
Kmetijski inštitut Slovenije
Agricultural Institute of Slovenia. Soil testing, plant health, agricultural product analysis.
Sponsored listings
Frequently Asked Questions
EN IEC 62115:2020/A12:2026 is a draft published by CLC. Its full title is "Electric toys - Safety". This standard covers: The standard deals with safety requirements for electric toys that have at least one function dependant on electricity, electric toys being any product designed or intended, whether or not exclusively, for use in play by children under 14 years of age.
The standard deals with safety requirements for electric toys that have at least one function dependant on electricity, electric toys being any product designed or intended, whether or not exclusively, for use in play by children under 14 years of age.
EN IEC 62115:2020/A12:2026 is classified under the following ICS (International Classification for Standards) categories: 13.120 - Domestic safety; 97.200.50 - Toys. The ICS classification helps identify the subject area and facilitates finding related standards.
EN IEC 62115:2020/A12:2026 has the following relationships with other standards: It is inter standard links to EN IEC 62115:2020, EN IEC 62115:2020/A1:2026. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN IEC 62115:2020/A12:2026 is associated with the following European legislation: EU Directives/Regulations: 2009/48/EC; Standardization Mandates: M/589. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN IEC 62115:2020/A12:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2026
Električne igrače - Varnost - Dopolnilo AB
Electric toys - Safety
Elektrische Spielzeuge - Sicherheit
Jouets électriques - Sécurité
Ta slovenski standard je istoveten z: EN IEC 62115:2020/prAB:2026
ICS:
13.120 Varnost na domu Domestic safety
97.200.50 Igrače Toys
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD DRAFT
EN IEC 62115:2020
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAB
January 2026
ICS 13.120; 97.200.50 -
English Version
Electric toys - Safety
Jouets électriques - Sécurité Elektrische Spielzeuge - Sicherheit
This draft amendment prAB, if approved, will modify the European Standard EN IEC 62115:2020; it is submitted to CENELEC members for
enquiry.
Deadline for CENELEC: 2026-04-10.
It has been drawn up by CLC/TC 61.
If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 80557 Ref. No. EN IEC 62115:2020/prAB:2026 E
EN IEC 62115:2020/prAB:2026
Contents Page
1 European foreword . 3
2 1 Modification to the Introduction . 4
3 2 Modifications to the Scope . 4
4 3 Modification to Clause 2, “Normative references” . 4
5 4 Modification to Clause 5, “General conditions for tests” . 4
6 5 Modifications to Clause 7, “Markings on electric toys” . 4
7 6 Modifications to Clause 13, “Construction” . 4
8 7 Modifications to Clause 15, “Components” . 5
9 8 Modification to annexes . 5
10 9 Modifications to the Bibliography .14
EN IEC 62115:2020/prAB:2026
11 European foreword
12 This document EN IEC 62115:2020/prAB:2026 has been prepared by CLC/TC/61 "Safety of household and
13 similar electrical appliances".
14 This document is currently submitted to the Enquiry.
15 The following dates are proposed:
• latest date by which the existence of this (doa) dav + 6 months
document has to be announced at national
level
• latest date by which this document has to be (dop) dav + 12 months
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) dav + 36 months
conflicting with this document have to be (to be confirmed or
withdrawn modified when voting)
16 This document is read in conjunction with EN IEC 62115:2020, EN IEC 62115:2020/A11:2020 and EN IEC
17 62115:2020/FprA1:2025.
18 EN IEC 62115:2020/FprAB:2025 includes the following significant technical modifications:
19 — Update date reference;
20 The numbering system for European clauses, subclauses, notes, tables, figures and annexes that are additional
21 to those in the IEC standard are prefixed with the letter “Z”.
22 This document has been prepared under a standardization request addressed to CENELEC by the European
23 Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
24 Member States.
25 For the relationship with EU Legislation, see informative Annex ZZ, which is an integral part of this document
EN IEC 62115:2020/prAB:2026
26 1 Modification to the Introduction
27 Addition:
28 This European Amendment A12 supplements or modifies the corresponding clauses of the standards below:
29 — EN IEC 62115:2020, EN IEC 62115:2020/A11:2020 and EN IEC 62115:2020/FprA1:20251
30 2 Modifications to the Scope
31 In Note 3, replace “EN 61558-2-7:2007” with “EN IEC 61558-2-7:2025”.
32 In Note 3, replace “EN 61558-2-16:2013” with “EN 61558-2-16:2025”.
33 In Note 3, replace “EN 60335-2-29:2010” with “EN 60335-2-29:2021” (twice).
34 3 Modification to Clause 2, “Normative references”
35 Delete the reference to IEC TR 60083.
36 Delete the reference to IEC 62133.
37 Add the following references:
38 EN 62133-1:2017, Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety
39 requirements for portable sealed secondary cells, and for batteries made from them, for use in portable
40 applications - Part 1: Nickel systems
41 EN 62133-2:2017, Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety
42 requirements for portable sealed secondary cells, and for batteries made from them, for use in portable
43 applications - Part 2: Lithium systems
44 EN 71-1:2014+A1:2018, Safety of toys - Part 1: Mechanical and physical properties
45 4 Modification to Clause 5, “General conditions for tests”
46 In 5.7.2, fourth paragraph, replace “IEC 62133” with “EN 62133-1:2017 or EN 62133-2:2017”.
47 5 Modifications to Clause 7, “Markings on electric toys”
48 In 7.2.1, replace the note and list items with the following:
49 “NOTE The legal requirements related to the markings of the toys can be found in Directive 2009/48/EC and in the
50 associated European Commission guidance documents on toys.”
51 In 7.3.3.4, replace “5.2 of ISO 8124-1:2014” with “8.2 of EN 71-1:2014+A1:2018”.
52 6 Modifications to Clause 13, “Construction”
53 In 13.4.1:
54 replace “5.2 of ISO 8124-1:2014” with “8.2 of EN 71-1:2014+A1:2018”,
55 replace “EN 60335-1:2012+A12+A13” with “EN IEC 60335-1:2023 ”, and
PR=79952 EN IEC 62115:2020/FprA1:2025 will be published together with PR=80557
EN IEC 62115:2020/A12:2025.
As impacted by EN 62133-2:2017/A1:2021 and EN 62133-2:2017/A1:2021/AC:2022-01.
As impacted by EN IEC 60335-1:2023/A11:2023.
EN IEC 62115:2020/prAB:2026
56 replace “EN 60086-2:2016” with “EN IEC 60086-2:2021 ”.
57 In 13.4.2, replace “ISO 8124-1:2014” with “EN 71-1:2014+A1:2018”.
58 In 13.5, first paragraph, delete “listed in IEC TR 60083”.
60 7 Modifications to Clause 15, “Components”
61 In 15.5:
62 replace “5.2 of ISO 8124-1:2014” with ‘8.2 of EN 71-1:2014+A1:2018” and
63 replace “IEC 62133” with “EN 62133-1:2017 or EN 62133-2:2017”.
64 8 Modification to annexes
As impacted by EN IEC 60086-2:2021/AC:2022-07.
EN IEC 62115:2020/prAB:2026
65 Annex ZA
66 (normative)
68 Normative references to international publications with their
69 corresponding European publications
70 The following documents are referred to in the text in such a way that some or all of their content constitutes
71 requirements of this document. For dated references, only the edition cited applies. For undated references, the
72 latest edition of the referenced document (including any amendments) applies.
73 NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
74 relevant EN/HD applies.
75 NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
76 www.cencenelec.eu.
77 Delete the reference to IEC TR 60083.
78 Delete the reference to IEC 62133.
79 Replace the following standards:
Publication Year Title EN/HD Year
IEC 60086-2 2015 Primary batteries – Part 2: Physical and EN IEC 60086-2 2021
electrical specifications
+ AC 2022
IEC 60086 series Primary batteries – Part1: General EN IEC 60086-1 2021
+ AC 2022-
Primary batteries – Part 3: Watch batteries EN IEC 60086-3 2021
+ AC 2023-
Primary batteries – Part 4: Safety of lithium EN IEC 60086-4 2025
batteries
Primary batteries – Part 5: Safety of batteries EN IEC 60086-5 2021
with aqueous electrolyte
+ AC 2022-
Primary batteries – Part 6: Guidance on EN IEC 60086-6 2020
environmental aspects
IEC 60335-1 2010 Household and similar electrical appliances – EN IEC 60335-1 2023
Safety – Part 1: General requirements
+ A1 2013
+ A2 2016
- - + A11 2023
IEC 60335-2-29 2016 Household and similar electrical appliances – EN 60335-2-29 2021
Safety – Part 2-29: Particular requirements for
battery chargers
+ A1 2021
+ A11 2024
EN IEC 62115:2020/prAB:2026
IEC 60384-14 2013 Fixed capacitors for use in electronic equipment EN IEC 60384-14 2023
– Part 14: Sectional specification – Fixed
capacitors for electromagnetic interference
suppression and connection to the supply
mains
+ AC 2024
+ A1 2025
IEC 60417 2025 Graphical symbols for use on equipment – 12- - -
month subscription to regularly updated online
database comprising all graphical symbols
published in IEC 60417
IEC 60695-2-11 - Fire hazard testing – Part 2-11: Glowing/hot- EN IEC 60695-2-11 2021
wire based test methods – Glow-wire
flammability test method for end-products
(GWEPT)
IEC 60695-2-13 - Fire hazard testing - Part 2-13: Glowing/hot-wire EN IEC 60695-2-13 2021
based test methods - Glow-wire ignition
temperature (GWIT) test method for materials
IEC 60730-1 2013 Automatic electrical controls – Part 1: General EN IEC 60730-1 2024
requirements
+ A1 2015
- - + A11 2024
IEC 60730 series Automatic electrical controls for household and EN 60730-2-3 2007
similar use – Part 2-3: Particular requirements
for thermal protectors for ballasts for tubular
fluorescent lamps
Automatic electrical controls - Part 2-5: EN 60730-2-5 2015
Particular requirements for electrical burner
control systems
+ A1 2019
+ A2 2021
+ AC 2023
Automatic electrical controls - Part 2-6: EN IEC 60730-6 2025
Particular requirements for automatic electrical
pressure sensing controls including mechanical
requirements
Automatic electrical controls - Part 2-7: EN IEC 60730-2-7 2020
Particular requirements for timers and time
switches
Automatic electrical controls for household and EN IEC 60730-2-8 2025
similar use - Part 2-8: Particular requirements
for electrically operated water valves, including
mechanical requirements
Automatic electrical controls - Part 2-9: EN IEC 60730-2-9 2019
Particular requirements for temperature
sensing control.
+ A1 2019
+ A2 2020
EN IEC 62115:2020/prAB:2026
Automatic electrical controls for household and IEC EN 60730-2-10 2007
similar use - Part 2-10: Particular requirements
for motor-starting relays
Automatic electrical controls - Part 2-11: IEC EN 60730-2-11 2025
Particular requirements for energy regulators
Automatic electrical control
...



