EN 60255-26:2005

Electrical relays - Part 26: Electromagnetic compatibility requirements for measuring relays and protection equipment

Specifies the requirements for electromagnetic compatibility for measuring relays and protection equipment. Is applicable to measuring relays and protection equipment for power system protection, including the control, monitoring and process interface equipment used with those systems.

Elektrische Relais - Teil 26: Anforderungen an die elektromagnetische Verträglichkeit für Messrelais und Schutzeinrichtungen

Relais électriques - Partie 26: Exigences de compatibilité électromagnétique pour les relais de mesure et dispositifs de protection

Spécifie les exigences de compatibilité électromagnétique pour les relais de mesure et dispositifs de protection. Est applicable aux relais de mesure et dispositifs de protection pour la protection des réseaux d'énergie, y compris les fonctions de contrôle, surveillance et communication intégrées utilisées dans ces réseaux.

Električni releji – 26. del: Zahteve za elektromagnetno združljivost merilnih relejev in zaščitne opreme (IEC 60255-26:2004)

General Information

• Status: Withdrawn
• Publication Date: 30-Jan-2005
• Withdrawal Date: 31-Oct-2007
• ICS: 29.120.70 - Relays
• Technical Committee: CLC/TC 95X - Measuring relays and protection equipment
• Drafting Committee: IEC/TC 95 - IEC_TC_95
• Parallel Committee: IEC/TC 95 - IEC_TC_95
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Sep-2012
• Completion Date: 01-Sep-2012
• Directive: 2004/108/EC - Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 2004/108/EU - DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 89/336/EEC - Electromagnetic compatibility (EMC)
• Ref Project: SIST EN 60255-26:2005 - Electrical relays -- Part 26 : Electromagnetic compatibility requirements for measuring relays and protection equipment

Relations

• Replaced By: EN 60255-26:2009 - Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 60255-26:2005

STANDARD
december 2005
Električni releji – 26. del: Zahteve za elektromagnetno združljivost merilnih
relejev in zaščitne opreme (IEC 60255-26:2004)
Electrical relays - Part 26 : Electromagnetic compatibility requirements for
measuring relays and protection equipment (IEC 60255-26:2004)
ICS 29.120.70; 33.100.01 Referenčna številka
SIST EN 60255-26:2005(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60255-26
NORME EUROPÉENNE
EUROPÄISCHE NORM January 2005

ICS 29.120.70


English version


Electrical relays
Part 26 : Electromagnetic compatibility requirements
for measuring relays and protection equipment
(IEC 60255-26:2004)


Relais électriques Elektrische Relais
Partie 26: Exigences de compatibilité Teil 26: Anforderungen an die
électromagnétique pour les relais de elektromagnetische Verträglichkeit
mesure et dispositifs de protection für Messrelais und Schutzeinrichtungen
(CEI 60255-26:2004) (IEC 60255-26:2004)






This European Standard was approved by CENELEC on 2004-11-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60255-26:2005 E

---------------------- Page: 2 ----------------------

EN 60255-26:2005 - 2 -
Foreword
The text of document 95/162/FDIS, future edition 1 of IEC 60255-26, prepared by IEC TC 95,
Measuring relays and protection equipment, was submitted to the IEC-CENELEC parallel vote and
was approved by CENELEC as EN 60255-26 on 2004-11-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-11-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60255-26:2004 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60255-26:2005
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1)
IEC 60255-11 – Electrical relays – –
Part 11: Interruptions to and alternating
component (ripple) in d.c. auxiliary
energizing quantity of measuring relays

1)
IEC 60255-22-1 – Part 22-1: Electrical disturbance tests for – –
measuring relays and protection
equipment - 1 MHz burst disturbance
tests

1) 2)
IEC 60255-22-2 – Part 22: Electrical disturbance tests for EN 60255-22-2 1996
measuring relays and protection
equipment - Section 2: Electrostatic
discharge tests

1) 2)
IEC 60255-22-3 – Part 22-3: Electrical disturbance tests for EN 60255-22-3 2000
measuring relays and protection
equipment - Radiated electromagnetic
field disturbance tests

1) 2)
IEC 60255-22-4 – Part 22-4: Electrical disturbance tests for EN 60255-22-4 2002
measuring relays and protection
equipment - Electrical fast transient/burst
immunity test

1) 2)
IEC
...