iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

HD 22.1 S3:1997

(Main)

Rubber insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements

Rubber insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements

HD 22 applies to rigid and flexible cables with insulation and sheath if any, based on vulcanised rubber, of rated voltages Uo/U up to and including 450/750 V used in power installations of nominal voltage not exceeding 450/750 V a.c. This Part 1 specifies the General Requirements applicable to these cables. The particular types of cables are specified in Part 3 onwards of this HD, and are hereafter referred to as "the particular specifications". The code designations of these types of cables are in accordance with HD 361.

Gummi-isolierte Starkstromleitungen mit Nennspannungen bis 450/750 V - Teil 1: Allgemeine Anforderungen

Conducteurs et câbles isolés au caoutchouc, de tension assignée au plus égale à 450/750 V - Partie 1: Prescriptions générales

Rubber insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements (IEC 60245-1:1994, related)

General Information

Status
Withdrawn
Publication Date
25-Sep-1997
ICS
29.060.20 - Cables
Technical Committee
CLC/TC 20 - Electric cables
Drafting Committee
IEC/TC 20 - IEC_TC_20
Parallel Committee
IEC/TC 20 - IEC_TC_20
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Sep-2003
Completion Date
01-Sep-2003
Directive
2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
73/23/EEC - Electrical equipment designed for use within certain voltage limits
Ref Project
SIST HD 22.1 S3:1998 - Rubber insulated cables of rated voltages up to and including 450/750 V -- Part 1: General requirements

Relations

Replaces
HD 22.1 S2:1992/A13:1992 - Rubber insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
Effective Date
28-Jan-2023
Replaces
HD 22.1 S2:1992/A12:1992 - Rubber insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
Effective Date
28-Jan-2023
Replaces
HD 22.1 S2:1992/A20:1996 - Rubber insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
Effective Date
28-Jan-2023
Replaces
HD 22.1 S2:1992/A11:1992 - Rubber insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
Effective Date
28-Jan-2023
Replaces
HD 22.1 S2:1992/A16:1994 - Rubber insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
Effective Date
28-Jan-2023
Replaces
HD 22.1 S2:1992/A19:1995 - Rubber insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
Effective Date
28-Jan-2023
Replaces
HD 22.1 S2:1992/A15:1993 - Rubber insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
Effective Date
28-Jan-2023
Replaces
HD 22.1 S2:1992/A14:1994 - Rubber insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
Effective Date
28-Jan-2023
Replaces
HD 22.1 S2:1992/A18:1995 - Rubber insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
Effective Date
28-Jan-2023
Replaces
HD 22.1 S2:1992/A17:1995 - Rubber insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
Effective Date
28-Jan-2023
Replaced By
HD 22.1 S4:2002 - Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 1: General requirements
Effective Date
28-Jan-2023

Buy Standard

HD 22.1 S3:1998HD 22.1 S3:1998
PreviousNext
Standardization document
HD 22.1 S3:1998
English language
63 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST HD 22.1 S3:1998
01-februar-1998
1DGRPHãþD
SIST HD 22.1 S2:1998/A11:1998
SIST HD 22.1 S2:1998/A12:1998
SIST HD 22.1 S2:1998/A13:1998
SIST HD 22.1 S2:1998/A14:1998
SIST HD 22.1 S2:1998/A15:1998
SIST HD 22.1 S2:1998/A16:1998
SIST HD 22.1 S2:1998/A17:1998
SIST HD 22.1 S2:1998/A18:1998
SIST HD 22.1 S2:1998/A19:1998
SIST HD 22.1 S2:1998/A20:1998
Rubber insulated cables of rated voltages up to and including 450/750 V - Part 1:
General requirements (IEC 60245-1:1994, related)
Rubber insulated cables of rated voltages up to and including 450/750 V -- Part 1:
General requirements
Gummi-isolierte Starkstromleitungen mit Nennspannungen bis 450/750 V -- Teil 1:
Allgemeine Anforderungen
Conducteurs et câbles isolés au caoutchouc, de tension assignée au plus égale à
450/750 V -- Partie 1: Prescriptions générales
Ta slovenski standard je istoveten z: HD 22.1 S3:1997
ICS:
29.060.20 Kabli Cables
SIST HD 22.1 S3:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST HD 22.1 S3:1998

---------------------- Page: 2 ----------------------

SIST HD 22.1 S3:1998

---------------------- Page: 3 ----------------------

SIST HD 22.1 S3:1998

---------------------- Page: 4 ----------------------

SIST HD 22.1 S3:1998

---------------------- Page: 5 ----------------------

SIST HD 22.1 S3:1998

---------------------- Page: 6 ----------------------

SIST HD 22.1 S3:1998

---------------------- Page: 7 ----------------------

SIST HD 22.1 S3:1998

---------------------- Page: 8 ----------------------

SIST HD 22.1 S3:1998

---------------------- Page: 9 ----------------------

SIST HD 22.1 S3:1998

---------------------- Page: 10 ----------------------

SIST HD 22.1 S3:1998

---------------------- Page: 11 ----------------------

SIST HD 22.1 S3:1998

---------------------- Page: 12 ----------------------

SIST HD 22.1 S3:1998

---------------------- Page: 13 ----------------------

SIST HD 22.1 S3:1998

---------------------- Page: 14 ----------------------

SIST HD 22.1 S3:1998

---------------------- Page: 15 ----------------------

SIST HD 22.1 S3:1998

---------------------- Page: 16 ----------------------

SIST HD 22.1 S3:1998

---------------------- Page: 17 ----------------------

SIST HD 22.1 S3:1998

---------------------- Page: 18 ----------------------

SIST HD 22.1 S3:1998

---------------------- Page: 19 ----------------------

SIST HD 22.1 S3:1998

---------------------- Page: 20 ----------------------

SIST HD 22.1 S3:1998

---------------------- Page: 21 ----------------------

SIST HD 22.1 S3:1998

---------------------- Page: 22 ----------------------

SIST HD 22.1 S3:1998

---------------------- Page: 23 ----------------------

SIST HD 22.1 S3:1998

---------------------- Page: 24 ----------------------

SIST HD 22.1 S3:1998

---------------------- Page: 25 ----------------------

SIST HD 22.1 S3:1998

---------------------- Page: 26 ----------------------

SIST HD 22.1 S3:1998
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60230:2018/A1:2023(Amendment)
Impulse tests on cables and their accessories
SIST EN IEC 60230:2018/A1:2023
  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
HD 620 S3:2023(Main)
Distribution cables with extruded insulation for rated voltages from 3,6/6 (7,2) kV up to and including 20,8/36 (42) kV
SIST HD 620 S3:2023

HD 620 applies to cables with extruded insulation and for rated voltages Uo/U(Um) from 3,6/6 (7,2) kV up to 20,8/36(42) kV used in power distribution systems of voltages not exceeding the maximum r.m.s. value of the system voltage Um. This Part (Part 1) specifies the general requirements applicable to these cables, unless otherwise specified in the particular sections of this HD. Test methods specified are given EN 60228, EN 60229, EN 60332-1-2, EN 60811, EN 60885-3, HD 605 and HD 632. Attention should be drawn to the fact that a significant number of sections include references to long term tests which are collected in HD 605. These long-term tests are considered as necessary and reflect the best available knowledge for the existing cable design. They are related to specific designs and different philosophies concerning adequate measures against the influence of water. However, it is the firm intention to reduce this large number of different tests, but more experience should be gained before starting to rationalise this important matter. The particular types of cables are specified in Parts 9 to 12. NOTE Parts 3, 4, 5, 6, 7 and 8 were withdrawn in HD 620 S2.

  • Standardization document
    854 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    872 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50576:2022(Main)
Electric cables - Extended application of test results for reaction to fire
SIST EN 50576:2023

This document describes the procedure and rules for extended application of results of tests carried out according to the test methods described in EN 50399, EN 60332 1 2 and EN 61034 2. The EXAP rules described apply to EN 50399 test results used for classification according to EN 13501 6 in classes B2ca, Cca and Dca, additional smoke production classes s1, s2 and s3 and flaming droplets/particles, to EN 60332 1 2 test results used for classification in classes B2ca, Cca, Dca and Eca and to EN 61034 2 test results used for classification in classes s1a and s1b. No EXAP procedure and rules have been developed in respect to the results of tests carried out according to the test method described in EN 60754 2. As the parameters (pH and conductivity) for each cable in a family are determined based upon calculation using material test results, this is considered as a matter of direct application. Material test results taken from any one sample of finished cable from a family are sufficient to calculate the parameters for each cable in the family. Cables with a diameter of 5,0 mm or less are expected to be tested as bundles according to EN 50399. Cables with a diameter of less than or equal to 5,0 mm are included in the specific and general EXAP rules for single core unsheathed power cables only. The rules apply to circular and non-circular cables provided that they fall within the scope of the relevant test method. A specific EXAP rule has been developed for any of the types of electric cable families as defined in this document. A general EXAP rule has been developed for all electric cable families unless otherwise stated elsewhere in this document. NOTE 1 Multicore power cables are sometimes referred to as control cables with a rated voltage but for the purposes of this document are considered as power cables. For multipair, multitriple and multiquad control cables, either the general EXAP rule or the specific EXAP rule for power cables or the specific EXAP rule for communication cables can be applied. The use of the specific EXAP rule gives benefit in the lower number of cables to be tested for a range of cable constructions (product family). An EXAP is only possible when cables belong to a family as defined in this document. NOTE 2 For the purposes of this document, the term "electric cables" also covers optical fibre cables.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50525-1:2011/A1:2022(Amendment)
Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 1: General requirements
SIST EN 50525-1:2011/A1:2023

This European Standard gives the general requirements for rigid and flexible energy cables of rated voltages U0/U up to and including 450/750 V AC, used in power installations and with domestic and industrial appliances and equipment. NOTE 1 For some types of flexible cables, the term "cord" is used. NOTE 2 Rated voltages are given by reference to alternating current systems. Use of the cables in direct current systems is permitted. NOTE 3 National regulations may prescribe additional performance requirements for cables that are not given in the particular requirements. For example for buildings with high levels of public access, additional fire performance requirements may be applicable, The test methods for checking conformity with the requirements are given in other standards (see Introduction). The particular types of cables are specified in EN 50525-2 (series) and EN 50525-3 (series). The individual parts within those two series are collectively referred to hereafter as "the particular specifications". Only the sizes (conductor class, cross-sectional area), number of cores, other constructional features and rated voltages given in the particular specification apply to the individual cable type. The code designations of these types of cables are in accordance with HD 361.

  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50399:2022(Main)
Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test - Test apparatus, procedures, results
SIST EN 50399:2022

This document specifies the apparatus and methods of test for the assessment of vertical flame spread, heat release, smoke production and occurrence of flaming droplets/particles of vertically mounted electric cables under defined conditions. NOTE For the purpose of this document, the term “electric cable” covers all power, control and communication cables, including optical fibre cables and hybrid cables used for the conveyance of energy and/or signals. This document details the apparatus for the fire propagation testing and the arrangement and calibration of the instrumentation to be installed to measure the heat release and the smoke production during the test. The combustion gases are collected in a hood above the test chamber and conveyed through an exhaust system, which allows the measurement of heat release rate and smoke production. Test procedures to be used for type approval testing for classification of cables in classes [2, 7] B1ca, B2ca, Cca and Dca are given. Cable installation on the test ladder and the volume of air passing through the chamber are in accordance with the Commission Decision 2006/751/EC [6], which is reflected in the requirements of this document.

  • Standard
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    79 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60332-1-2:2004/A12:2020(Amendment)
Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame
SIST EN 60332-1-2:2005/A12:2021

This standard specifies the procedure for testing the resistance to vertical flame propagation for a single vertical electrical insulated conductor or cable, or optical fibre cable, under fire conditions.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60332-3-10:2018/A11:2020(Amendment)
Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus
SIST EN IEC 60332-3-10:2018/A11:2021

EN 60332-3-10:2018 details the apparatus and its arrangement and calibration for methods of test for the assessment of vertical flame spread of vertically mounted bunched wires or cables, electrical or optical, under defined conditions.

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50306-3:2020(Main)
Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 3: Single core and multicore cables screened and thin wall sheathed
SIST EN 50306-3:2020

This document specifies requirements for, and constructions and dimensions of, multicore cables, rated voltage U0/ U = 300/500 V, of the following type: Screened (0,5 mm2 to 2,5 mm2, number of cores from 1 to 8). All cables have stranded tinned copper conductors, and thin wall thickness, halogen-free, insulation and sheath. They are for use in railway rolling stock as fixed wiring or wiring where limited flexing in operation is encountered. These cables are rated for occasional thermal stresses causing ageing equivalent to continuous operational life at a temperature of 90 °C. For standard cables, this is determined by the acceptance test defined in EN 50305, using accelerated long-term (5 000 h) thermal ageing indicating a 110 °C/20 000 h temperature index. If the customer were to require lifetime predictions this would be demonstrated based on the temperature index of the product as supplied by the manufacturer. The maximum temperature for short circuit conditions is 160 °C based on duration of 5 s. Under fire conditions, the cables exhibit special performance characteristics in respect of maximum permissible flame propagation (flame spread) and maximum permissible emission of smoke and toxic gases. These requirements are specified to permit the cables to satisfy Hazard Level 3 of EN 45545 1 and EN 45545 2. EN 50306 3:2020 is expected to be used in conjunction with EN 50306 1:2020, General Requirements, and EN 50306 2:2020, Single core cables.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50305:2020(Main)
Railway applications - Railway rolling stock cables having special fire performance - Test methods
SIST EN 50305:2020

This document specifies special test methods applicable to cables, and their constituent insulating and sheathing materials, for use in railway rolling stock. Such cables are specified in the various parts of the EN 50264 series, EN 50306 series and EN 50382 series. Other test methods required for railway rolling stock cables and their insulating and sheathing materials are listed in Annex A.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50306-4:2020(Main)
Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 4: Multicore and multipair screened or not screened sheathed cables
SIST EN 50306-4:2020

This document specifies requirements for, and constructions and dimensions of, multicore and multipair cables rated voltage U0/U: 300/500 V, of the following types: - unscreened, sheathed for either exposed or protected wiring (0,5 mm2 to 2,5 mm2, number of cores from 2 to 48); - screened, sheathed for either exposed or protected wiring (0,5 mm2 to 2,5 mm2, number of cores from 2 to 8); - unscreened, sheathed for either exposed or protected wiring (0,5 mm2 to 1,5 mm2, number of screened pairs of cores from 2 to 7). - screened, sheathed for either exposed or protected wiring (0,5 mm2 to 1,5 mm2, number of unscreened pairs of cores from 2 to 7). All cables have stranded tinned copper conductors, halogen-free, thin wall thickness insulation and standard wall thickness sheath. Cable types are specified for use in exposed situations (Class E), and for protected situations (Class P). They are for use in railway rolling stock as fixed wiring or wiring where limited flexing in operation is encountered. These cables are rated for occasional thermal stresses causing ageing equivalent to continuous operational life at a temperature of 90 °C. For standard cables this is determined by the acceptance test defined in EN 50305, using accelerated long-term (5 000 h) thermal ageing indicating a 110 °C/20 000 h temperature index. If the customer were to require lifetime predictions this would be demonstrated based on the temperature index of the product as supplied by the manufacturer. The maximum temperature for short circuit conditions is 160 °C based on duration of 5 s. Under fire conditions the cables exhibit special performance characteristics in respect of maximum permissible flame propagation (flame spread) and maximum permissible emission of smoke and toxic gases. These requirements are specified to permit the cables to satisfy Hazard Level 3 of EN 45545 1 and EN 45545 2. EN 50306 4:2020 is expected to be used in conjunction with EN 50306-1:2020, General requirements, EN 50306-2:2020, Single core cables, and EN 50306-3:2020, Single core and multicore cables.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day