EN 61207-7:2013

Expression of performance of gas analyzers - Part 7: Tuneable semiconductor laser gas analyzers

IEC 61207-7:2013 includes the terminology, definitions, statements and tests that are specific to tuneable semiconductor laser gas analyzers, which utilize tuneable semiconductor laser absorption spectroscopy (TSLAS). It applies to all aspects of analyzers utilizing TSLAS for the concentration measurement of one or more gas components in a gaseous mixture or vapour. It applies to analyzers utilizing tuneable semiconductor lasers as sources and utilizing absorption spectroscopy, such as direct absorption, FMS, WMS, multi-pass absorption spectroscopy, CRDS, ICOS, PAS and CEAS techniques, etc.

Angabe zum Betriebsverhalten von Gasanalysatoren - Teil 7: Gasanalysatoren mit abstimmbaren Halbleiterlasern

Expression des performances des analyseurs de gaz - Partie 7: Analyseurs de gaz laser à semi-conducteurs accordables

La CEI 61207-7:2013 comprend la terminologie, les définitions, les déclarations et les essais spécifiques aux analyseurs de gaz laser à semiconducteurs accordables, qui utilisent la spectroscopie à absorption laser à semiconducteur accordable. Elle s'applique à tous les aspects des analyseurs à TSLAS utilisés pour la mesure de la concentration d'un ou de plusieurs composants de gaz dans un mélange gazeux ou de la vapeur. Elle s'applique aux analyseurs à sources lasers à semiconducteurs accordables et utilisés dans le cadre de la spectroscopie d'absorption, comprenant les techniques d'absorption directe, FMS, WMS, spectroscopie d'absorption multipassages, CRDS, ICOS, PAS et CEAS, etc.

Prikaz lastnosti analizatorjev plina - 7. del: Analizatorji plina z nastavljivim polprevodniškim laserjem (absorpcijska spektroskopija, ki uporablja nastavljiv polprevodniški laser) (IEC 61207-7:2013)

General Information

• Status: Published
• Publication Date: 05-Dec-2013
• Withdrawal Date: 29-Oct-2016
• ICS: 19.040 - Environmental testing
• ICS: 71.040.40 - Chemical analysis
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65B - IEC_SC_65B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 06-Dec-2013
• Completion Date: 06-Dec-2013
• Ref Project: SIST EN 61207-7:2014 - Expression of performance of gas analyzers - Part 7: Tunable semiconductor laser gas analyzers (utilizing tunable semiconductor laser absorption spectroscopy)

Relations

• Corrected By: EN 61207-7:2013/AC:2015 - Expression of performance of gas analyzers - Part 7: Tuneable semiconductor laser gas analyzers
• Effective Date: 25-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-april-2014
Prikaz lastnosti analizatorjev plina - 7. del: Analizatorji plina z nastavljivim
polprevodniškim laserjem (absorpcijska spektroskopija, ki uporablja nastavljiv
polprevodniški laser) (IEC 61207-7:2013)
Expression of performance of gas analyzers - Part 7: Tunable semiconductor laser gas
analyzers (utilizing tunable semiconductor laser absorption spectroscopy)
Angabe zum Betriebsverhalten von Gasanalysatoren - Teil 7: Gasanalysatoren mit
abstimmbaren Halbleiterlasern
Expression des performances des analyseurs de gaz - Partie 7: Analyseurs de gaz laser
à semi-conducteurs accordables (à spectroscopie à absorption laser à semi-conducteur
accordable)
Ta slovenski standard je istoveten z: EN 61207-7:2013
ICS:
71.040.40 Kemijska analiza Chemical analysis
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61207-7
NORME EUROPÉENNE
December 2013
EUROPÄISCHE NORM
ICS 19.040; 71.040.40
English version
Expression of performance of gas analyzers -
Part 7: Tuneable semiconductor laser gas analyzers
(IEC 61207-7:2013)
Expression des performances  Angabe zum Betriebsverhalten
des analyseurs de gaz - von Gasanalysatoren -
Partie 7: Analyseurs de gaz laser à semi- Teil 7: Gasanalysatoren mit abstimmbaren
conducteurs accordables Halbleiterlasern
(CEI 61207-7:2013) (IEC 61207-7:2013)

This European Standard was approved by CENELEC on 2013-10-30. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61207-7:2013 E
Foreword
The text of document 65B/876/FDIS, future edition 1 of IEC 61207-7, prepared by SC 65B
"Measurement and control devices” of IEC/TC 65 “Industrial-process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be (dop) 2014-07-30
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-10-30
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This Standard is to be used in conjunction with EN 61207-1:2010.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61207-7:2013 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:

ISO 9001 NOTE Harmonized as EN ISO 9001.

- 3 - EN 61207-7:2013
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60654-1 1993 Industrial-process measurement EN 60654-1 1993
and control equipment - Operating
conditions -
Part 1: Climatic conditions
1)
IEC 60654-2 1979 Operating conditions for industrial-process EN 60654-2 1997
+ A1 1992 measurement and control equipment -
Part 2: Power
IEC 60654-3 1983 Operating conditions for industrial-process EN 60654-3 1997
measurement and control equipment -
Part 3: Mechanical influences
IEC 60825-1 2007 Safety of laser products - EN 60825-1 2007
Part 1: Equipment classification and
requirements
IEC 61207-1 2010 Expression of performance EN 61207-1 2010
of gas analyzers -
Part 1: General
1)
EN 60654-2 includes A1 to IEC 60654-2.

IEC 61207-7 ®
Edition 1.0 2013-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Expression of performance of gas analyzers –

Part 7: Tuneable semiconductor laser gas analyzers

Expression des performances des analyseurs de gaz –

Partie 7: Analyseurs de gaz laser à semiconducteurs accordables

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX T
ICS 19.040; 71.040.40 ISBN 978-2-8322-1117-5

– 2 – 61207-7  IEC:2013
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Procedure for specification . 10
4.1 General . 10
4.2 In situ analyzers . 10
4.2.1 Additional operation and maintenance requirements . 10
4.2.2 Additional terms related to the specification of performance . 10
4.2.3 Additional limits of uncertainties . 11
4.3 Extractive analyzers . 11
4.3.1 Additional operation and maintenance requirements . 11
4.3.2 Additional terms related to the specification of performance . 12
4.4 Recommended standard values and range of influence quantities . 12
4.5 Laser safety . 12
5 Procedures for compliance testing . 12
5.1 In situ analyzers . 12
5.1.1 General . 12
5.1.2 Apparatus to simulate measurement condition . 13
5.1.3 Apparatus to generate test gas mixture . 13
5.1.4 Apparatus to investigate the attenuation induced by opaque dust,
liquid droplets and other particles . 13
5.1.5 Testing procedures . 14
5.2 Extractive analyzers . 16
5.2.1 General . 16
5.2.2 Apparatus to generate test gas mixture . 16
5.2.3 Testing procedures . 16
Annex A (informative) Systems of tuneable semiconductor laser gas analyzers . 18
Annex B (normative) Examples of the test apparatus . 19
Bibliography . 23

Figure A.1 – Tuneable semiconductor laser gas analyzers . 18
Figure B.1 – Example of a test apparatus to simulate measurement condition for
across-duct and open-path analyzers . 19
Figure B.2 – Example of a test apparatus to simulate measurement condition for probe
type analyzers . 19
Figure B.3 – Example of apparatus to generate the test gas mixture . 20
Figure B.4 – Delay time, rise time and fall time . 21
Figure B.5 – Example of a grid to simulate the attenuation by the dust in optical path . 22

61207-7  IEC:2013 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
EXPRESSION OF PERFORMANCE OF GAS ANALYZERS –

Part 7: Tuneable semiconductor laser gas analyzers

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elemen
...