EN 62264-1:2008
(Main)Enterprise-control system integration - Part 1: Models and terminology
Enterprise-control system integration - Part 1: Models and terminology
describes the interface content between manufacturing control functions and other enterprise functions. The interfaces considered are the interfaces between Levels 3 and 4 of the hierarchical model defined by this standard. The goal is to reduce the risk, cost, and errors associated with implementing these interfaces.
Integration von Unternehmensführungs- und Leitsystemen - Teil 1: Modelle und Terminologie
Intégration des systèmes entreprise-contrôle - Partie 1: Modèles et terminologie
décrit le contenu de l'interface entre les fonctions de contrôles de fabrication et les autres fonctions de l'entreprise. Les interfaces considérées sont les interfaces entre les Niveaux 3 et 4 du modèle hiérarchique défini par cette norme. Le but est de réduire le risque, le coût et les erreurs associés à la mise en place de ces interfaces.
Integracija sistemov za upravljanje podjetij - 1. del: Modeli in terminologija (IEC 62264-1:2003)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62264-1:2008
01-junij-2008
Integracija sistemov za upravljanje podjetij - 1. del: Modeli in terminologija (IEC
62264-1:2003)
Enterprise-control system integration - Part 1: Models and terminology
Integration von Unternehmensführungs und Leitsystemen - Teil 1: Modelle und
Terminologie
Intégration des systemes entreprise-contrôle - Partie 1: Modeles et terminologie
Ta slovenski standard je istoveten z: EN 62264-1:2008
ICS:
25.040.01 Sistemi za avtomatizacijo v Industrial automation
industriji na splošno systems in general
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN 62264-1:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 62264-1
NORME EUROPÉENNE
January 2008
EUROPÄISCHE NORM
ICS 25.040; 35.240.50
English version
Enterprise-control system integration -
Part 1: Models and terminology
(IEC 62264-1:2003)
Intégration des systèmes Integration von Unternehmensführungs-
entreprise-contrôle - und Leitsystemen -
Partie 1: Modèles et terminologie Teil 1: Modelle und Terminologie
(CEI 62264-1:2003) (IEC 62264-1:2003)
This European Standard was approved by CENELEC on 2007-12-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62264-1:2008 E
---------------------- Page: 2 ----------------------
EN 62264-1:2008 - 2 -
Foreword
The text of the International Standard IEC 62264-1:2003, prepared by SC 65A, System aspects, of
IEC TC 65, Industrial-process measurement, control and automation, and ISO TC 184/SC 5/JWG 15,
Enterprise-control system integration, was submitted to the Unique Acceptance Procedure and was
approved by CENELEC as EN 62264-1 on 2007-12-01 without any modification.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-12-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62264-1:2003 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 3 ----------------------
- 3 - EN 62264-1:2008
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 61512-1 1997 Batch control - EN 61512-1 1999
Part 1: Models and terminology
ISO 10303-1 1994 Industrial automation systems and ENV ISO 10303-1 1995
integration - Product data representation and
exchange -
Part 1: Overview and fundamental principles
ISO 15531-1 2004 Industrial automation systems and - -
integration - Industrial manufacturing
management data -
Part 1: General
ISO 15704 2000 Industrial automation systems - - -
Requirements for enterprise-reference
architectures and methodologies
ISO/IEC 19501 2005 Information technology - Open Distributed - -
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.