EN IEC 61784-1-22:2023
(Main)Industrial networks - Profiles - Part 1-22: Fieldbus profiles - Communication Profile Family 22
Industrial networks - Profiles - Part 1-22: Fieldbus profiles - Communication Profile Family 22
This document defines Communication Profile Family 22 (CPF 22). CPF 22 specifies a protocol specific communication profile (CP) based on the IEC 61158 series (Type 28) and other standards, to be used in the design of devices involved in communications in factory manufacturing and process control. NOTE All CPs are based on standards or draft standards or International Standards published by the IEC or from standards or International Standards established by other standards bodies or open standards processes. Each CP selects an appropriate consistent and compatible subset of services and protocols from the relevant set that is defined and modelled in the IEC 61158 series. For the selected subset of services and protocols, the profile also describes any possible or necessary constraints in parameter values.
Industrielle Kommunikationsnetze - Profile - Teil 1-22: Feldbusprofile - Kommunikationsprofilfamilie (CPF) 22
Réseaux industriels - Profils - Partie 1-22: Profils de bus de terrain - Famille de profils de communication 22
L'IEC 61784-1-22:2023 définit la famille de profils de communication 22 (CPF 22). La CPF 22 spécifie un profil de communication spécifique à un protocole (CP) basé sur la série IEC 61158 (type 28) et d’autres normes, à utiliser pour la conception des dispositifs impliqués dans les communications dans la fabrication en usine et la commande de processus. NOTE Tous les CP sont fondés sur des normes, des projets de normes ou des Normes internationales publiées par l’IEC, ou sur des normes ou des Normes internationales établies par d’autres organismes de normalisation ou encore de processus de normes ouvertes. Chaque CP sélectionne un sous-ensemble de services et de protocoles approprié, cohérent et compatible, à partir de l’ensemble du jeu pertinent défini et modélisé dans la série IEC 61158. Le profil décrit également, pour le sous-ensemble choisi de services et de protocoles, toute contrainte possible ou nécessaire au niveau des valeurs des paramètres.
Industrijska omrežja - Profili - 1-22. del: Profili procesnih vodil - Komunikacijski profil skupine 22 (IEC 61784-1-22:2023)
Ta del standarda IEC 61784-1 določa družino komunikacijskih profilov 22 (CPF 22). Družina komunikacijskih profilov 22 določa komunikacijski profil (CP), specifičen za protokol, na osnovi skupine standardov IEC 61158 (tip 28) in drugih standardov, za uporabo pri oblikovanju naprav, vključenih v postopkih komunikacije v tovarniški proizvodnji in kontroli procesa.
OPOMBA: Vsi komunikacijski profili temeljijo na standardih ali osnutkih standardov ali mednarodnih standardih, ki jih je objavila komisija IEC, oziroma na standardih ali mednarodnih standardih, ki so jih določili drugi organi za standarde ali procesi odprtih standardov.
Vsak komunikacijski profil izbere skladno in združljivo podskupino opravil ter protokolov iz ustreznega sklopa, ki je definiran in modeliran v skupini standardov IEC 61158. Za izbrane podskupine opravil in protokolov profil opisuje tudi morebitne potrebne ali nujne omejitve vrednosti parametrov.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2023
Industrijska omrežja - Profili - 1-22. del: Profili procesnih vodil - Komunikacijski
profil skupine 22 (IEC 61784-1-22:2023)
Industrial networks - Profiles - Part 1-22: Fieldbus profiles - Communication Profile
Family 22 (IEC 61784-1-22:2023)
Industrielle Kommunikationsnetze - Profile - Teil 1-22: Feldbusprofile -
Kommunikationsprofilfamilie (CPF) 22 (IEC 61784-1-22:2023)
Réseaux industriels - Profils - Partie 1-22: Profils de bus de terrain - Famille de profils de
communication 22 (IEC 61784-1-22:2023)
Ta slovenski standard je istoveten z: EN IEC 61784-1-22:2023
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.05 Večslojne uporabniške Multilayer applications
rešitve
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 61784-1-22
NORME EUROPÉENNE
EUROPÄISCHE NORM April 2023
ICS 33.020 Supersedes EN IEC 61784-1:2019 (partially)
English Version
Industrial networks - Profiles - Part 1-22: Fieldbus profiles -
Communication Profile Family 22
(IEC 61784-1-22:2023)
Réseaux industriels - Profils - Partie 1-22: Profils de bus de Industrielle Kommunikationsnetze - Profile - Teil 1-22:
terrain - Famille de profils de communication 22 Feldbusprofile - Kommunikationsprofilfamilie (CPF) 22
(IEC 61784-1-22:2023) (IEC 61784-1-22:2023)
This European Standard was approved by CENELEC on 2023-04-11. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61784-1-22:2023 E
European foreword
The text of document 65C/1208/FDIS, future edition 1 of IEC 61784-1-22, prepared by SC 65C
"Industrial networks" of IEC/TC 65 "Industrial-process measurement, control and automation" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61784-1-
22:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-01-11
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-04-11
document have to be withdrawn
This document, together with other parts of the same series, partially supersedes EN IEC 61784-
1:2019 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61784-1-22:2023 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 61158-1 NOTE Approved as EN IEC 61158-1
IEC 61158-3 (series) NOTE Approved as EN 61158-3 (series)
IEC 61158-4 (series) NOTE Approved as EN 61158-4 (series)
IEC 61158-5 (series) NOTE Approved as EN 61158-5 (series)
IEC 61158-6 (series) NOTE Approved as EN 61158-6 (series)
IEC 61784-1 (series) NOTE Approved as EN IEC 61784-1 (series)
IEC 61784-2 (series) NOTE Approved as EN IEC 61784-2 (series)
To be published. Stage at the time of publication: FprEN IEC 61784-1-X:2023.
To be published. Stage at the time of publication: FprEN IEC 61784-2-X:2023.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 61158 series Industrial communication networks - EN IEC 61158 series
Fieldbus specifications
IEC 61158-2 2023 Industrial communication networks - EN IEC 61158-2 2023
Fieldbus specifications - Part 2: Physical
layer specification and service definition
IEC 61158-3-28 2023 Industrial communication networks - EN IEC 61158-3-28 2023
Fieldbus specifications - Part 3-28: Data-
link layer service definition - Type 28
elements
IEC 61158-4-28 2023 Industrial communication networks - EN IEC 61158-4-28 2023
Fieldbus specifications - Part 4-28: Data-
link layer protocol specification - Type 28
elements
IEC 61158-5-28 2023 Industrial communication networks - EN IEC 61158-5-28 2023
Fieldbus specifications - Part 5-28:
Application layer service definition - Type
28 elements
IEC 61158-6-28 2023 Industrial communication networks - EN IEC 61158-6-28 —
Fieldbus specifications - Part 6-28:
Application layer protocol specification -
Type 28 elements
IEC 61784-1-0 2023 Industrial networks - Profiles - Part 1-0: EN IEC 61784-1-0 —
Fieldbus profiles - General concepts and
terminology
To be published. Stage at time of publication: prEN IEC 61158-6-28:2023.
To be published. Stage at time of publication: prEN IEC 61784-1-0:2023.
IEC 61784-1-22 ®
Edition 1.0 2023-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial networks – Profiles –
Part 1-22: Fieldbus profiles – Communication Profile Family 22
Réseaux industriels – Profils –
Partie 1-22: Profils de bus de terrain – Famille de profils de communication 22
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.020 ISBN 978-2-8322-6541-3
– 2 – IEC 61784-1-22:2023 © IEC 2023
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, abbreviated terms, symbols, and conventions . 7
3.1 Terms and definitions . 7
3.2 Abbreviations and symbols . 7
3.2.1 Common abbreviations and symbols . 7
3.2.2 Other abbreviations and symbols . 7
3.3 Conventions . 7
4 CPF 22 (AUTBUS™) . 7
4.1 General overview . 7
4.2 Profile 22/1 . 8
4.2.1 Physical layer . 8
4.2.2 Data-link layer . 9
4.2.3 Application layer . 10
Annex A (informative) CPF 22 (AUTBUS) communication concepts . 12
Bibliography . 13
Table 1 – CP 22/1: overview of profile sets . 7
Table 2 – CP 22/1: PhL selection . 8
Table 3 – CP 22/1: DLL service selection . 9
Table 4 – CP 22/1: DLL protocol selection . 10
Table 5 – CP 22/1: AL service selection . 10
Table 6 – CP 22/1: AL protocol selection . 11
IEC 61784-1-22:2023 © IEC 2023 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INDUSTRIAL NETWORKS –
PROFILES –
Part 1-22: Fieldbus profiles –
Communication Profile Family 22
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be th
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.