iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60417-1:2003

(Main)

Graphical symbols for use on equipment -- Part 1: Overview and application

Graphical symbols for use on equipment -- Part 1: Overview and application

Contains a presentation of the graphical symbols with the corresponding descriptions in numerical order which does not necessarily represent any functional grouping. It is complemented by an alphabetical index and a graphical survey of the symbols. Additional information is provided to the user by classifications to form and function, and the examples of application. EN 60417-1 and 60417-2 cancel and replace EN 60417 and all its supplements.

Graphische Symbole für Betriebsmittel -- Teil 1: Übersicht und Anwendung

Symboles graphiques utilisables sur le matériel -- Partie 1: Vue d'ensemble et application

Graphical symbols for use on equipment - Part 1: Overview and application (IEC 60417-1:2000)

General Information

Status
Withdrawn
Publication Date
30-Apr-2003
Withdrawal Date
09-Oct-2022
ICS
01.080.20 - Graphical symbols for use on specific equipment
29.020 - Electrical engineering in general
Technical Committee
EDO - Documentation and graphical symbols
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
05-Oct-2022
Due Date
28-Oct-2022
Completion Date
10-Oct-2022
Ref Project
prEN 60417-1 - Graphical symbols for use on equipment - Part 1: Overview and application

Buy Standard

EN 60417-1:2003 - sestavljen z novejšim IEC-jemEN 60417-1:2003 - sestavljen z novejšim IEC-jem
PreviousNext
Standard
EN 60417-1:2003 - sestavljen z novejšim IEC-jem
English and French language
202 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST EN 60417-1:2003

STANDARD
maj 2003
Graphical symbols for use on equipment - Part 1: Overview and application (IEC
60417-1:2000)
ICS 01.080.20; 29.020; 33.020 Referenčna številka
SIST EN 60417-1:
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60445:2021(Main)
Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors (IEC 60445:2021)
EN IEC 60445:2021

This document applies to the identification and marking of terminals of electrical equipment
such as resistors, fuses, relays, contactors, transformers, rotating machines and, wherever
applicable, to combinations of such equipment (e.g. assemblies), and it also applies to the
identification of terminations of certain designated conductors. It also provides general rules for
the use of certain colours or alphanumeric notations to identify conductors with the aim of
avoiding ambiguity and ensuring safe operation. These conductor colours and alphanumeric
notations are intended to be applied on cores, busbars, and electrical equipment, and in cables
or installations.
This basic safety publication focusing on safety essential requirements is primarily intended for
use by technical committees in the preparation of standards in accordance with the principles
laid down in IEC Guide 104 and ISO/IEC Guide 51.
It is not intended for use by manufacturers or certification bodies. One of the responsibilities of
a technical committee is, wherever applicable, to make use of basic safety publications in the
preparation of its publications. The requirements of this basic safety publication will not apply
unless specifically referred to or included in the relevant publications.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 80416-3:2003/A1:2011(Amendment)
Basic principles for graphical symbols for use on equipment - Part 3: Guidelines for the application of graphical symbols (IEC 80416-3:2002/A1:2011)
EN 80416-3:2002/A1:2011

International Standard 80416 is a multi-part standard which provides principles and guidelines for the creation and application of graphical symbols for use on equipment. This part of IEC 80416 provides guidelines for the application of graphical symbols for use on equipment in order to maintain visual clarity and overall consistency when such graphical symbols are applied. It stipulates the permissible extent by which a symbol original may be modified in reproduction for actual use on equipment.

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 80416-3:2003(Main)
Basic principles for graphical symbols for use on equipment -- Part 3: Guidelines for the application of graphical symbols
EN 80416-3:2002

Provides guidelines for the application of graphical symbols for use on equipment in order to maintain visual clarity and overall consistency when such graphical symbols are applied. It stipulates the permissible extent by which a symbol original may be modified in reproduction for actual use on equipment

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50419:2022(Main)
Marking of electrical and electronic equipment (EEE) in respect to separate collection of waste EEE (WEEE)
EN 50419:2022

This document specifies a marking
— of electrical and electronic equipment (EEE) with a view to minimizing the disposal of waste EEE (WEEE)
as unsorted waste and to facilitating its separate collection.
NOTE 1 This is in accordance with Article 14(4) of Directive 2012/19/EU (WEEE, recast)
— that serves to clearly identify the producer of the equipment and
— that the equipment has been put on the market after 13 August 2005.
NOTE 2 This is in accordance with Articles 12(3) and 15(2) of Directive 2012/19/EU (WEEE, recast)
— that applies to categories of electrical and electronic equipment subject to WEEE collection, treatment,
recovery and environmentally sound disposal as defined by European and national regulations, provided
the equipment concerned is not part of another type of equipment that does not fall within the scope of
above mentioned regulations.
NOTE 3 This is in accordance with Article 2 and Annexes I – IV of Directive 2012/19/EU (WEEE, recast) [1]
The definition of a technical carrier medium for machine based identifying the producer, such as a barcode,
electronic data medium or microchip, is not covered by this document.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60445:2021(Main)
Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors (IEC 60445:2021)
EN IEC 60445:2021

This document applies to the identification and marking of terminals of electrical equipment
such as resistors, fuses, relays, contactors, transformers, rotating machines and, wherever
applicable, to combinations of such equipment (e.g. assemblies), and it also applies to the
identification of terminations of certain designated conductors. It also provides general rules for
the use of certain colours or alphanumeric notations to identify conductors with the aim of
avoiding ambiguity and ensuring safe operation. These conductor colours and alphanumeric
notations are intended to be applied on cores, busbars, and electrical equipment, and in cables
or installations.
This basic safety publication focusing on safety essential requirements is primarily intended for
use by technical committees in the preparation of standards in accordance with the principles
laid down in IEC Guide 104 and ISO/IEC Guide 51.
It is not intended for use by manufacturers or certification bodies. One of the responsibilities of
a technical committee is, wherever applicable, to make use of basic safety publications in the
preparation of its publications. The requirements of this basic safety publication will not apply
unless specifically referred to or included in the relevant publications.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 80416-3:2003/A1:2011(Amendment)
Basic principles for graphical symbols for use on equipment - Part 3: Guidelines for the application of graphical symbols (IEC 80416-3:2002/A1:2011)
EN 80416-3:2002/A1:2011

International Standard 80416 is a multi-part standard which provides principles and guidelines for the creation and application of graphical symbols for use on equipment. This part of IEC 80416 provides guidelines for the application of graphical symbols for use on equipment in order to maintain visual clarity and overall consistency when such graphical symbols are applied. It stipulates the permissible extent by which a symbol original may be modified in reproduction for actual use on equipment.

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 80416-3:2003(Main)
Basic principles for graphical symbols for use on equipment -- Part 3: Guidelines for the application of graphical symbols
EN 80416-3:2002

Provides guidelines for the application of graphical symbols for use on equipment in order to maintain visual clarity and overall consistency when such graphical symbols are applied. It stipulates the permissible extent by which a symbol original may be modified in reproduction for actual use on equipment

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 12349:2023(Main)
Mechanical vibration - Guide to the health effects of vibration on the human body
CEN/TR 12349:2023

The aim of this CEN report is to provide information on the possible adverse health effects caused by exposure to vibration at work.  the report addresses manufacturers as well as employers and employees using vibrating machinery in order to improve their understanding of the possible health problems arising from occupational exposure to vibration.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80004-1:2023(Main)
Nanotechnologies - Vocabulary - Part 1: Core vocabulary (ISO 80004-1:2023)
EN ISO 80004-1:2023

This document defines core terms in the field of nanotechnology. This document is intended to facilitate communication between organizations and individuals in industry and those who interact with them.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-4:2023(Main)
Extenders - Specifications and methods of test - Part 4: Whiting (ISO 3262-4:2022)
EN ISO 3262-4:2023

This document specifies requirements and corresponding methods of test for whiting.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day