EN 62386-101:2009
(Main)Digital addressable lighting interface - Part 101: General requirements - System
Digital addressable lighting interface - Part 101: General requirements - System
IEC 62386-101:2009 specifies a protocol for control by digital signals of electronic lighting equipment used on a.c. or d.c. supplies. This Part 101 is intended to be used in conjunction with Part 102, which contains general requirements for the relevant product type (control gear), and with the appropriate part 2XX (particular requirements for control gear) containing clauses to supplement or modify the corresponding clauses in Parts 101 and 102 in order to provide the relevant requirements for each type of product. This International Standard, together with IEC 62386-102 and IEC 62386-201, replaces Clause E.4, 'Control by digital signals', and Annex G, 'Test procedures'.
Digital adressierbare Schnittstelle für die Beleuchtung - Teil 101: Allgemeine Anforderungen - System
Interface d'éclairage adressable numérique - Partie 101: Exigences générales - Système
La CEI 62386-101:2009 spécifie un protocole pour la commande par des signaux numériques des appareils d'éclairage électroniques destinés à être utilisés dans les alimentations alternatives ou continues. La présente Partie 101 est destinée à être utilisée conjointement avec la Partie 102 appropriée, qui contient les exigences générales pour le type de produit applicable (appareillage de commande), et avec la partie 2XX appropriée (exigences particulières pour les appareillages) qui comporte les articles complétant ou modifiant les articles correspondants de la Partie 101 et Partie 102, afin d'établir les règles complètes pour chaque type de produit. La présente Norme internationale, ainsi que la CEI 62386-102 et la CEI 62386-201, remplacent l'Article E.4, 'Commande par signaux numériques', et l'Annexe G, 'Procédures d'essai pour les ballasts avec interface de commande numérique selon l'Article E.4', de la CEI 60929:2006.
Digitalni naslovljivi vmesnik za razsvetljavo - 101. del: Splošne zahteve - Sistem (IEC 62386-101:2009)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Digitalni naslovljivi vmesnik za razsvetljavo - 101. del: Splošne zahteve - Sistem (IEC 62386-101:2009)Digital adressierbare Schnittstelle für die Beleuchtung - Teil 101: Allgemeine Anforderungen - System (IEC 62386-101:2009)Interface d'éclairage adressable numérique - Partie 101: Exigences générales - Système (CEI 62386-101:2009)Digital addressable lighting interface - Part 101: General requirements - System (IEC 62386-101:2009)35.200Vmesniška in povezovalna opremaInterface and interconnection equipment29.140.50Instalacijski sistemi za razsvetljavoLighting installation systemsICS:Ta slovenski standard je istoveten z:EN 62386-101:2009SIST EN 62386-101:2009en,fr01-november-2009SIST EN 62386-101:2009SLOVENSKI
STANDARDSIST EN 60929:20061DGRPHãþD
EUROPEAN STANDARD EN 62386-101 NORME EUROPÉENNE
EUROPÄISCHE NORM August 2009
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62386-101:2009 E
ICS 29.140; 29.140.50 Partially supersedes EN 60929:2006
English version
Digital addressable lighting interface -
Part 101: General requirements -
System (IEC 62386-101:2009)
Interface d'éclairage
adressable numérique -
Partie 101: Exigences générales -
Système (CEI 62386-101:2009)
Digital adressierbare Schnittstelle
für die Beleuchtung -
Teil 101: Allgemeine Anforderungen -
System (IEC 62386-101:2009)
This European Standard was approved by CENELEC on 2009-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
- 2 -
Foreword The text of document 34C/860/FDIS, future edition 1 of IEC 62386-101, prepared by SC 34C, Auxiliaries for lamps, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62386-101 on 2009-07-01. EN 62386-101:2009, together with EN 62386-102 and EN 62386-201, replaces Clause E.4, “Control by digital signals”, and Annex G, "Test procedures for ballasts with digital control interface according to Clause E.4" of EN 60929:2006. This Part 101 is intended to be used in conjunction with Part 102, which contains general requirements for the relevant product type (control gear), and with the appropriate part 2XX (particular requirements for control gear) containing clauses to supplement or modify the corresponding clauses in Parts 101 and 102 in order to provide the relevant requirements for each type of product. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2010-04-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2012-07-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 62386-101:2009 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60921 NOTE
Harmonized as EN 60921:2004 (not modified). IEC 60923 NOTE
Harmonized as EN 60923:2005 (not modified). IEC 60925 NOTE
Harmonized as EN 60925:1991 (not modified). IEC 60929 NOTE
Harmonized as EN 60929:2006 (not modified). IEC 61347-1 NOTE
Harmonized as EN 61347-1:2007 (modified). IEC 61547 NOTE
Harmonized as EN 61547:2009 (not modified). CISPR 15 NOTE
Harmonized as EN 55015:2006 (not modified). __________
- 3 - EN 62386-101:2009 Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60598-1 (mod) -1) Luminaires -
Part 1: General requirements and tests EN 60598-1 + A11 20082) 2009
IEC 60669-2-1 (mod) A1 (mod) 2002
2008 Switches for household and similar fixed electrical installations -
Part 2-1: Particular requirements - Electronic switches EN 60669-2-1 + corr. December
A1 2004 2007 2009
IEC 61347-2-3 2000 Lamp controlgear -
Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps EN 61347-2-3 + corr. July
2001 2003
IEC 62386-102 2009 Digital addressable lighting interface -
Part 102: General requirements - Control gearEN 62386-102 2009
1) Undated reference. 2) Valid edition at date of issue. SIST EN 62386-101:2009
IEC 62386-101Edition 1.0 2009-06INTERNATIONAL STANDARD NORME INTERNATIONALEDigital addressable lighting interface –
Part 101: General requirements – System
Interface d’éclairage adressable numérique –
Partie 101: Exigences générales – Système
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE NICS 29.140; 29.140.50 PRICE CODECODE PRIXISBN 2-8318-1027-1
– 2 – 62386-101 © IEC:2009 CONTENTS FOREWORD.3 INTRODUCTION.5 1 Scope.6 2 Normative references.6 3 Terms and definitions.6 4 General.7 4.1 Purpose.7 4.2 Master-slave structure.7 4.3 Specification overview.7 5 Electrical specification.8 5.1 General.8 5.2 Marking of the control input terminals.8 5.3 Characteristics of the control interface.8 5.4 Insulating system of the control input terminals.9 5.5 Signal voltage rating.9 5.6 Signal current rating.10 5.7 Signal rise time and fall time.12 6 Interface power supply.12 6.1 General.12 6.2 Marking of the power supply terminals.12 6.3 Insulating system of the power supply terminals.12 6.4 Voltage rating.13 6.5 Current rating.13 6.6 Timing requirements.13 7 Transmission protocol structure.13 8 Timing.13 9 Method of operation.13 10 Declaration of variables.13 11 Definition of commands.13 Bibliography.15
Figure 1 – Equivalent circuit of the control interface.8 Figure 2 – Voltage levels.10 Figure 3 – Voltage and current levels for forward and backward transmission at a control gear.11 Figure 4 – Rise time and fall time at the control interface.12
62386-101 © IEC:2009 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
DIGITAL ADDRESSABLE LIGHTING INTERFACE –
Part 101: General requirements –
System
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62386-101 has been prepared by subcommittee 34C: Auxiliaries for lamps, of IEC technical committee 34: Lamps and related equipment. This International Standard, together with IEC 62386-102 and IEC 62386-201, replaces Clause E.4, “Control by digital signals”, and Annex G, "Test procedures for ballasts with digital control interface according to Clause E.4" of IEC 60929:2006. The text of this standard is based on the following documents: FDIS Report on voting 34C/860/FDIS 34C/873/RVD
Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. SIST EN 62386-101:2009
– 4 – 62386-101 © IEC:2009 This Part 101 is intended to be used in conjunction with
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.