Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-13: Particular requirements for range hoods

IEC 60704-2-13:2011(E) applies to electrical range hoods for household and similar use intended for filtering the air of a room or for exhausting the air out of a room, including their accessories and their component parts. It also applies to range hoods with an external fan which may be mounted inside or outside of the room where the range hood is located. This second edition cancels and replaces the first edition (2000) and constitutes an adaptation to the third edition of IEC 60704-1 (2010). This Part 2-13 is intended to be used in conjunction with IEC 60704-1:2010 (3rd edition) Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 1: General requirements. This Part 2-13 supplements or modifies the corresponding clauses in IEC 60704-1, so as to establish the test code for range hoods. When a particular subclause of Part 1 is not mentioned in this Part 2-13, that subclause is applicable as far as reasonable. Where this standard states 'addition', 'modification' or 'replacement', the relevant requirements, test specifications or explanatory matter in Part 1 is to be adapted accordingly. Subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1. Unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause. Additional annexes are lettered AA, BB, etc.

Elektrische Geräte für den Hausgebrauch und ähnliche Zwecke - Prüfvorschrift für die Bestimmung der Luftschallemission - Teil 2-13: Besondere Anforderungen für Dunstabzugshauben

Appareils électrodomestiques et analogues - Code d'essai pour la détermination du bruit aérien - Partie 2-13: Règles particulières pour les hottes de cuisine

Gospodinjski in podobni električni aparati - Preskuševalni kod za ugotavljanje zvočnega hrupa v zraku - 2-13. del: Posebne zahteve za kuhinjske nape (IEC 60704-2-13:2011)

Te posebne zahteve veljajo za električne kuhinjske nape za gospodinjsko in podobno uporabo, namenjene filtriranju zraka v sobi ali odvajanju zraka iz sobe, vključno z njihovimi dodatki in njihovimi sestavnimi deli. Prav tako velja za kuhinjske nape z zunanjim ventilatorjem, ki je lahko nameščen v sobi ali zunaj, kjer je kuhinjska napa.

General Information

Status
Withdrawn
Publication Date
14-Apr-2011
Withdrawal Date
02-Mar-2014
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
30-Nov-2019
Completion Date
30-Nov-2019

Relations

Buy Standard

Standard
EN 60704-2-13:2011
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-junij-2011
1DGRPHãþD
SIST EN 60704-2-13:2001
SIST EN 60704-2-13:2001/A1:2007
SIST EN 60704-2-13:2001/A2:2009
*RVSRGLQMVNLLQSRGREQLHOHNWULþQLDSDUDWL3UHVNXãHYDOQLNRG]DXJRWDYOMDQMH
]YRþQHJDKUXSDY]UDNXGHO3RVHEQH]DKWHYH]DNXKLQMVNHQDSH ,(&

Household and similar electrical appliances - Test code for the determination of airborne
acoustical noise - Part 2-13: Particular requirements for range hoods (IEC 60704-2-
13:2011)
Elektrische Geräte für den Hausgebrauch und ähnliche Zwecke - Prüfvorschrift für die
Bestimmung der Luftschallemission - Teil 2-13: Besondere Anforderungen für
Dunstabzugshauben (IEC 60704-2-13:2011)
Appareils électrodomestiques et analogues - Code d'essai pour la détermination du bruit
aérien - Partie 2-13: Règles particulières pour les hottes de cuisine (CEI 60704-2-
13:2011)
Ta slovenski standard je istoveten z: EN 60704-2-13:2011
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
97.040.20 âWHGLOQLNLGHORYQLSXOWL Cooking ranges, working
SHþLFHLQSRGREQLDSDUDWL tables, ovens and similar
appliances
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60704-2-13
NORME EUROPÉENNE
April 2011
EUROPÄISCHE NORM
ICS 17.140.20; 97.040.20 Supersedes EN 60704-2-13:2000 + A1:2006 + A2:2008

English version
Household and similar electrical appliances -
Test code for the determination of airborne acoustical noise -
Part 2-13: Particular requirements for range hoods
(IEC 60704-2-13:2011)
Appareils électrodomestiques et Elektrische Geräte für den Hausgebrauch
analogues - und ähnliche Zwecke -
Code d'essai pour la détermination du Prüfvorschrift für die Bestimmung der
bruit aérien - Luftschallemission -
Partie 2-13: Règles particulières pour les Teil 2-13: Besondere Anforderungen für
hottes de cuisine Dunstabzugshauben
(CEI 60704-2-13:2011) (IEC 60704-2-13:2011)

This European Standard was approved by CENELEC on 2011-03-03. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60704-2-13:2011 E
Foreword
The text of document 59K/219/FDIS, future edition 2 of IEC 60704-2-13, prepared by SC 59K, Ovens and
microwave ovens, cooking ranges and similar appliances, of IEC TC 59, Performance of household
electrical appliances, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC
as EN 60704-2-13 on 2011-03-03.
This European Standard supersedes EN 60704-2-13:2000 + A1:2006 + A2:2008.
adaptation to the third edition of EN 60704-1 (2010).
This Part 2-13 is intended to be used in conjunction with EN 60704-1:2010 (3rd edition) Household and
similar electrical appliances – Test code for the determination of airborne acoustical noise – Part 1:
General requirements.
NOTE When “Part 1” is mentioned in this standard, it refers to EN 60704-1.
This Part 2-13 supplements or modifies the corresponding clauses in EN 60704-1, so as to establish the
test code for range hoods. When a particular subclause of Part 1 is not mentioned in this Part 2-13, that
subclause is applicable as far as reasonable. Where this standard states "addition", "modification" or
"replacement", the relevant requirements, test specifications or explanatory matter in Part 1 is to be
adapted accordingly.
Subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1.
Unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101,
including those in a replaced clause or subclause.
Additional annexes are lettered AA, BB, etc.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2011-12-03
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2014-03-03
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60704-2-13:2011 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 60704-2-13:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Addition:
Publication Year Title EN/HD Year

IEC 61591 1997 Household range hoods - Methods for EN 61591 1997
+ A1 2005 measuring performance + A1 2006
+ A2 2010 + A2 2011
ISO 7235 2003 Acoustics - Laboratory measurement EN ISO 7235 2009
procedures for ducted silencers and air-
terminal units - Insertion loss, flow noise and
total pressure loss
IEC 60704-2-13 ®
Edition 2.0 2011-01
INTERNATIONAL
STANDARD
Household and similar electrical appliances – Test code for the determination of
airborne acoustical noise –
Part 2-13: Particular requirements for range hoods

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
T
ICS 17.140.20; 97.040.20 ISBN 978-2-88912-328-5

– 2 – 60704-2-13  IEC:2011(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
TEST CODE FOR THE DETERMINATION
OF AIRBORNE ACOUSTICAL NOISE –

Part 2-13: Particular requirements for range hoods

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60704-2-13 has been prepared by subcommittee 59K: Ovens and
microwave ovens, cooking ranges and similar appliances, of IEC technical committee 59:
Performance of household and similar electrical appliances.
This second edition cancels and replaces the first edition (2000) and constitutes an
adaptation to the third edition of IEC 60704-1 (2010).
The text of this standard is based on the following documents:
FDIS Report on voting
59K/219/FDIS 59K/223/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.

60704-2-13  IEC:2011(E) – 3 –
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
This Part 2-13 is intended to be used in conjunction with IEC 60704-1:2010 (3rd edition)
Household and similar electrical appliances – Test code for the determination of airborne
acoustical noise – Part 1: General requirements.
NOTE 1 When “Part 1” is mentioned in this standard, it refers to IEC 60704-1.
This Part 2-13 supplements or modifies the corresponding clauses in IEC 60704-1, so as to
establish the test code for range hoods. When a particular subclause of Part 1 is not
mentioned in this Part 2-13, that subclause is applicable as far as reasonable. Where this
standard states "addition", "modification" or "replacement", the relevant requirements, test
specifications or explanatory matter in Part 1 is to be adapted accordingly.
Subclauses, tables and figures that are numbered starting from 101 are additional to those in
Part 1.
Unless notes are in a new subclause or involve notes in Part 1, they are numbered starting
from 101, including those in a replaced clause or subclause.
Additional annexes are lettered AA, BB, etc.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

– 4 – 60704-2-13  IEC:2011(E)
INTRODUCTION
The measuring conditions specified in this Part 2-13 provide for sufficient accuracy in
determining the noise emitted and comparing the results of measurements taken by different
laboratories, whilst simulating as far as possible the practical use of household range hoods.
It is recommended to consider the determination of noise levels as part of a comprehensive
testing procedure covering many aspects of the properties and performance of household
range hoods.
Compared to the first edition (2000) of this Part 2-13, the second edition doesn’t contain the
description of an appropriate test enclosure which has now been incorporated in Part 1. The
scope of this Part 2-13 has been extended to range hoods with an external fan. Furthermore
the values of standard deviations of sound power levels determined according to this part are
given.
In case of unavailability of an acoustical environment which is specified in Clause 4 of
ISO 3743-1, ISO 3743-2 and ISO 3744 alternatively the sound power of range hoods can be
determined according to Annex AA using the sound intensity method specified in ISO 9614-1
and ISO 9614-2. This method is not suitable if the source under test has significa
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.