EN 62684:2010
(Main)Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones
Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones
IEC 62684:2011 specifies the interoperability of common external power supplies for use with data enabled mobile telephones. It defines the common charging capability and specifies interface requirements for the the external power supply. Safety and EMC aspects are not covered by this International Standard. Safety is covered by IEC 60950-1 and EMC is covered by EN 301 489-34. The French version of this standard has not been voted upon.
Spezifikationen für die Interoperabilität eines einheitlichen externen Stromversorgungsgeräts (EPS) für die Anwendung bei datenübertragungs-fähigen Mobiltelefonen
Spécifications d’interopérabilité de l’alimentation externe commune (EPS) avec des téléphones mobiles permettant l’échange de données
La CEI 62684:2011 spécifie l'interopérabilité des alimentations externes communes utilisables avec des téléphones mobiles avec service de données. Elle définit leurs fonctionnalités communes en charge et spécifie les exigences d'interface pour l'alimentation externe. Les aspects liés à la sécurité et la CEM ne sont pas couverts par la présente Norme Internationale. La sécurité est traitée par la CEI 60950-1 et la CEM est traitée dans la EN 301 489-34. La version française de cette norme n'a pas été soumise au vote.
Specifikacije medobratovalnosti skupnega zunanjega napajanja (EPS) za podatkovne mobilne telefone
Ta mednarodni standard določa medobratovalnost skupnih zunanjih napajanj za podatkovne mobilne telefone. Opredeljuje splošno zmogljivost polnjenja in določa zahteve vmesnika za zunanje napajanje. Vidiki varnosti in EMC niso zajeti v tem mednarodnem standardu. Varnost je zajeta v IEC 60950-1 in EMC je zajeta v EN 301 489-34.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Specifikacije medobratovalnosti skupnega zunanjega napajanja (EPS) za podatkovne mobilne telefoneSpezifikationen für die Interoperabilität eines einheitlichen externen Stromversorgungsgeräts (EPS) für die Anwendung bei datenübertragungs-fähigen MobiltelefonenSpécifications d’interopérabilité de l’alimentation externe commune (EPS) avec des téléphones mobiles permettant l’échange de donnéesInteroperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones33.070.50Globalni sistem za mobilno telekomunikacijo (GSM)Global System for Mobile Communication (GSM)ICS:Ta slovenski standard je istoveten z:EN 62684:2010SIST EN 62684:2011en01-marec-2011SIST EN 62684:2011SLOVENSKI
STANDARD
EUROPEAN STANDARD EN 62684 NORME EUROPÉENNE
EUROPÄISCHE NORM December 2010
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2010 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62684:2010 E
ICS 33.070.50
English version
Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones (IEC 62684)
Spécifications d’interopérabilité de l’alimentation externe commune (EPS) avec des téléphones mobiles permettant l’échange de données (CEI 62684)
Spezifikationen für die Interoperabilität eines einheitlichen externen Stromversorgungsgeräts (EPS) für die Anwendung bei datenübertragungs-fähigen Mobiltelefonen (IEC 62684)
This European Standard was approved by CENELEC on 2010-11-17. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
at national level by publication of an identical
national standard or by endorsement
(dop)
2011-12-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2013-12-01 This European Standard has been prepared under Mandate M/455 given to CENELEC by the European Commission and the European Free Trade Association. This standard refers to specifications developed by the USB Implementers Forum that can be found on the USB website at www.usb.org (see Annex ZA). Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 62684 was approved by CENELEC as a European Standard without any modification. __________ SIST EN 62684:2011
- 3 - EN 62684:2010 Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60950-1 (mod) - Information technology equipment - Safety - Part 1: General requirements EN 60950-1 -
Universal Serial Bus Specification, Revision 2.0 - http://www.usb.org/developers/docs/ - -
Universal Serial
Bus, Cables and Connectors Class Document,
Revision 2.0 2007 - - -
USB Battery
Charging Specification, Revision 1.1 - http://www.usb.org/developers/compliance /connectors/ - -
USB Micro-USB Cables and Connectors Specification, Revision 1.01 - - - -
USB-IF Cable Assembly Test Requirements for Compliant Usage of Connectors and Cables in
Micro-USB 1.01 - http://www.usb.org/developers/compliance /cable/ - -
USB-IF
Connector Test Requirements - http://www.usb.org/developers/compliance /connectors/ - -
IEC 62684 Edition 1.0 2011-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones
Spécifications de l’intéropérabilité de l’alimentation externe commune (EPS) pour téléphones mobiles avec service de données
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE L ICS 33.050, 33.060.80 PRICE CODE CODE PRIX ISBN 978-2-88912-354-4
– 2 – 62684 IEC:2011 CONTENTS FOREWORD . 3 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 5 4 Abbreviations . 6 5 EPS specification . 6 5.1 DC plug connector specification . 6 5.2 AC input characteristic . 6 5.3 Environmental specification . 6 5.4 DC output characteristic . 7 5.5 Protection . 7 5.6 EPS detection . 7 5.7 Reliability . 8 6 Testing requirements . 8 6.1 General . 8 6.2 Common mode voltage of the DC output . 8 6.3 Ripple voltage at the DC output . 9 Bibliography . 10
62684 IEC:2011 – 3 – INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
INTEROPERABILITY SPECIFICATIONS
OF COMMON EXTERNAL POWER SUPPLY (EPS)
FOR USE WITH DATA-ENABLED MOBILE TELEPHONES
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62684 has been prepared by technical area 1: Terminals for audio, video and data services and content, of IEC technical committee 100: Audio, video and multimedia systems and equipment. The text of this standard is based on the following documents: CDV Report on voting 100/1714/CDV 100/1771/RVC
Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. The French version of this standard has not been voted upon. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. SIST EN 62684:2011
– 4 – 62684 IEC:2011 The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to the specific publication. At this date, the publication will be
• reconfirmed, • withdrawn, • replaced by a revised edition, or • amended.
62684 IEC:2011 – 5 – INTEROPERABILITY SPECIFICATIONS
OF COMMON EXTERNAL POWER SUPPLY (EPS)
FOR USE WITH DATA-ENABLED MOBILE TELEPHONES
1 Scope This International Standard specifies the interoperability of common external power supplies for use with data enabled mobile telephones. It defines the common charging capability and specifies interface requirements for the the external power supply. Safety and EMC aspects are not covered by this International Standard. Safety is covered by IEC 60950-1 and EMC is covered by EN 301 489-34. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60950-1:2005, Information technology equipment – Safety – Part 1: General requirements
EN 301 489-34 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services – Part 34: Specific conditions for External Power Supply (EPS) for mobile phones Universal Serial Bus Specification, Cables and Connectors Class Document, Revision 2.0, August 2007 (http://www.usb.org/developers/docs) USB Battery Charging Specification, Revision 1.1 USB Micro-USB Cables and Connectors Specification, Revision 1.01 USB-IF Cable Assembly Test Requirements for Compliant Usage of Connectors and Cables in Micro-USB 1.01 USB-IF Connector Test Requirements 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1
adaptor device for connecting from a USB Micro-B receptacle/plug to a specific non Micro-USB connector NOTE An adapter can also be a cable. SIST EN 62684:2011
– 6 – 62684 IEC:2011 4 Abbreviations For the purposes of this document, the following abbreviations apply: AC Alternating Cu
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.