EN 60360:1998
(Main)Standard method of measurement of lamp cap temperature rise
Standard method of measurement of lamp cap temperature rise
Describes the standard method of measurement of lamp cap temperature rise which is to be used when testing tungsten filament or discharge lamps for compliance with the limits. Covers the method of test and the specifications for test lampholders for lamps fitted with various sizes of ES and BC caps. This method has been used widely for incandescent lamps but its application is not limited to that type of lamp.
Standardverfahren zur Messung der Lampensockel-Übertemperatur
Méthode normalisée de mesure de l'échauffement d'un culot de lampe
Décrit la méthode de mesure normalisée de l'échauffement du culot de la lampe à appliquer pour la vérification de la conformité des lampes à incandescence ou des lampes à décharge aux limites spécifiées. Décrit la méthode d'essai et fournit les spécifications des douilles d'essai à utiliser avec les lampes selon le type de culot dont elles sont munies. Cette méthode a été largement utilisée pour les lampes à incandescence, mais son application n'est pas limitée à cette catégorie de lampes.
Standardna metoda za merjenje porasta temperature na vznožku žarnice ali sijalke (IEC 60360:1998)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60360:1999
01-julij-1999
1DGRPHãþD
SIST EN 60360:2000/A1:2000
SIST EN 60360:2000/A2:2000
Standardna metoda za merjenje porasta temperature na vznožku žarnice ali sijalke
(IEC 60360:1998)
Standard method of measurement of lamp cap temperature rise
Standardverfahren zur Messung der Lampensockel-Übertemperatur
Méthode normalisée de mesure de l'échauffement d'un culot de lampe
Ta slovenski standard je istoveten z: EN 60360:1998
ICS:
29.140.10 Grla in držala žarnic Lamp caps and holders
SIST EN 60360:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60360:1999
---------------------- Page: 2 ----------------------
SIST EN 60360:1999
---------------------- Page: 3 ----------------------
SIST EN 60360:1999
---------------------- Page: 4 ----------------------
SIST EN 60360:1999
---------------------- Page: 5 ----------------------
SIST EN 60360:1999
---------------------- Page: 6 ----------------------
SIST EN 60360:1999
NORME
CEI
INTERNATIONALE
IEC
60360
INTERNATIONAL
Troisième édition
STANDARD
Third edition
1998-06
Méthode normalisée de mesure de l’échauffement
d’un culot de lampe
Standard method of measurement
of lamp cap temperature rise
IEC 1998 Droits de reproduction réservés Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun any form or by any means, electronic or mechanical,
procédé, électronique ou mécanique, y compris la photo- including photocopying and microfilm, without permission in
copie et les microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
PRICE CODE Q
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue
---------------------- Page: 7 ----------------------
SIST EN 60360:1999
60360 © IEC:1998 – 3 –
CONTENTS
Page
FOREWORD . 5
INTRODUCTION . 7
Clause
1 General. 9
1.1 Scope. 9
1.2 Normative reference. 9
2 Definitions. 9
3 General conditions for measurements . 9
4 Test requirements. 11
5 Test lampholders. 13
6 Supply conductors. 15
7 Thermocouple. 15
8 Assembly of the lamp and test lampholder in the enclosure . 17
9 Measurement of temperature rise. 19
Figures . 21-35
---------------------- Page: 8 ----------------------
SIST EN 60360:1999
60360 © IEC:1998 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
STANDARD METHOD OF MEASUREMENT
OF LAMP CAP TEMPERATURE RISE
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.