Rotating electrical machines - Part 9: Noise limits

Drehende elektrische Maschinen - Teil 9: Geräuschgrenzwerte

Machines électriques tournantes - Partie 9: Limites de bruit

Električni rotacijski stroji - 9. del: Mejne vrednosti šuma (IEC 60034-9:2003/A1:2007)

General Information

Status
Published
Publication Date
11-Apr-2007
Technical Committee
Drafting Committee
Parallel Committee
Current Stage
6060 - Document made available
Due Date
12-Apr-2007
Completion Date
12-Apr-2007

RELATIONS

Buy Standard

Amendment
EN 60034-9:2006/A1:2007
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 60034-9:2006/A1:2007
01-september-2007
(OHNWULþQLURWDFLMVNLVWURMLGHO0HMQHYUHGQRVWLãXPD ,(&
$
Rotating electrical machines - Part 9: Noise limits (IEC 60034-9:2003/A1:2007)
Drehende elektrische Maschinen - Teil 9: Geräuschgrenzwerte (IEC 60034-
9:2003/A1:2007)

Machines électriques tournantes - Partie 9: Limites de bruit (CEI 60034-9:2003/A1:2007)

Ta slovenski standard je istoveten z: EN 60034-9:2005/A1:2007
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
29.160.01 Rotacijski stroji na splošno Rotating machinery in
general
SIST EN 60034-9:2006/A1:2007 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 60034-9/A1
NORME EUROPÉENNE
April 2007
EUROPÄISCHE NORM
ICS 29.160
English version
Rotating electrical machines -
Part 9: Noise limits
(IEC 60034-9:2003/A1:2007)
Machines électriques tournantes - Drehende elektrische Maschinen -
Partie 9: Limites de bruit Teil 9: Geräuschgrenzwerte
(CEI 60034-9:2003/A1:2007) (IEC 60034-9:2003/A1:2007)

This amendment A1 modifies the European Standard EN 60034-9:2005; it was approved by CENELEC on

2007-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which

stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on

application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language

made by translation under the responsibility of a CENELEC member into its own language and notified to the

Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the

Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,

Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60034-9:2005/A1:2007 E
---------------------- Page: 2 ----------------------
EN 60034-9:2005/A1:2007 - 2 -
Foreword

The text of document 2/1383/CDV, future amendment 1 to IEC 60034-9:2003, prepared by IEC TC 2,

Rotating machinery, was submitted to the IEC-CENELEC parallel Unique Acceptance Procedure and was

approved by CENELEC as amendment A1 to EN 60034-9:2005 on 2007-04-01.
The following dates were fixed:
– latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-01-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2010-04-01
__________
Endorsement notice

The text of amendment 1:2007 to the International Standard IEC 60034-9:2003 was approved by

CENELEC as an amendment to the European Standard without any modification.
__________
---------------------- Page: 3 ----------------------
NORME CEI
INTERNATIONALE
IEC
60034-9
INTERNATIONAL
2003
STANDARD
AMENDEMENT 1
AMENDMENT 1
2007-03
Amendement 1
Machines électriques tournantes –
Partie 9:
Limites de bruit
Amendment 1
Rotating electrical machines –
Part 9:
Noise limits
© IEC 2007 Droits de reproduction réservés ⎯ Copyright - all rights reserved

International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland

Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch

CODE PRIX
Commission Electrotechnique Internationale
PRICE CODE
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue
---------------------- Page: 4 ----------------------
60034-9 Amend. 1 © IEC:2007 – 3 –
FOREWORD

This amendment has been prepared by IEC technical committee 2: Rotating machinery.

The text of this amendment is based on the following documents:
CDV Report on voting
2/1383/CDV 2/1413/RVC

Full information on the voting for the approval of this amendment can be found in the report

on voting indicated in the above table.

The committee has decided that the contents of this amendment and the base publication will

remain unchanged until the maintenance result date indicated on the IEC web site under

"http://webstore.iec.ch" in the data related to the specific publication. At this date, the

publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________
Page 11
1 Scope
Replace the first paragraph of the scope with the following:
This part of IEC 60034:

– specifies test methods for the determination of sound power level of rotating electrical

machines;

– specifies maximum A-weighted sound power levels for factory acceptance testing of

network-supplied, rotating electrical machines in accordance with lEC 60034-1, having

methods of cooling according to lEC 60034-6 and degrees of protection according to

lEC 60034-5, and having the following characteristics:

• standard design, either a.c. or d.c., without additional special electrical, mechanical, or

acoustical modifications intended to reduce the sound power level;
• rated output from 1 kW (or kVA) up to and including 5 500 kW (or kVA);
• rated speed not greater than 3 750 min .

– provides guidance for the determination of noise levels for a.c. cage induction motors

supplied by converters.
Page 19
6 Sound power level limits
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.