EN IEC 62680-1-7:2019

Universal serial bus interfaces for data and power - Part 1-7: Common components - USB Audio 3.0 device class definition data formats

IEC 62680-1-7:2019 describes in detail all the Audio Data Formats that are supported by the Audio Device Class. This document is considered an integral part of the Audio Device Class Specification, although subsequent revisions of this document are independent of the revision evolution of the main USB Audio Specification. This is to easily accommodate the addition of new Audio Data Formats without impeding the core USB Audio Specification.

Schnittstellen des Universellen Seriellen Busses für Daten und Energie - Teil 1-7: Gemeinsame Komponenten - USB Audio 3.0 Geräteklassendefinition Datenformate

Interfaces de bus universel en série pour les données et l'alimentation électrique - Partie 1-7: Composants communs - Définition de classes de dispositifs USB Audio 3.0 pour formats de données

L'IEC 62680-1-7:2019 décrit en détail tous les formats de données audio pris en charge par la classe des dispositifs audio. Le présent document est vu comme faisant partie intégrante de la Spécification de classe de dispositifs audio, bien que les révisions ultérieures du présent document soient indépendantes de l'évolution des révisions de la Spécification USB audio principale. L'objectif est de faciliter la prise en compte de l'ajout de nouveaux formats de données audio sans affecter la Spécification USB audio de base.

Vmesniki univerzalnega serijskega vodila za prenos podatkov in napajanje - 1-7. del: Skupne komponente - Definicija tipa naprave USB Avdio 3.0 za podatkovne formate (IEC 62680-1-7:2019)

General Information

• Status: Published
• Publication Date: 14-Nov-2019
• Withdrawal Date: 23-Oct-2022
• ICS: 33.160 - Audio, video and audiovisual engineering
• ICS: 35.100.20 - Data link layer
• Technical Committee: CLC/TC 100X - Audio, video and multimedia systems and equipment and related sub-systems
• Drafting Committee: IEC/TC 100 - IEC_TC_100
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 15-Nov-2019
• Completion Date: 15-Nov-2019
• Ref Project: SIST EN IEC 62680-1-7:2020 - Universal serial bus interfaces for data and power - Part 1-7: Common components - USB Audio 3.0 device class definition data formats (IEC 62680-1-7:2019)

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2020
Vmesniki univerzalnega serijskega vodila za prenos podatkov in napajanje - 1-7.
del: Skupne komponente - Definicija tipa naprave USB Avdio 3.0 za podatkovne
formate (IEC 62680-1-7:2019)
Universal serial bus interfaces for data and power - Part 1-7: Common components -
USB Audio 3.0 device class definition data formats (IEC 62680-1-7:2019)
Schnittstellen des Universellen Seriellen Busses für Daten und Energie - Teil 1-7:
Gemeinsame Komponenten - USB Audio 3.0 Geräteklassendefinition Datenformate
(IEC 62680-1-7:2019)
Interfaces de bus universel en série pour les données et l'alimentation électrique - Partie
1-7: Composants communs - Définition de classes de dispositifs USB Audio 3.0 pour
formats de données (IEC 62680-1-7:2019)
Ta slovenski standard je istoveten z: EN IEC 62680-1-7:2019
ICS:
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62680-1-7

NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2019
ICS 33.160; 35.100.20
English Version
Universal serial bus interfaces for data and power - Part 1-7:
Common components - USB Audio 3.0 device class definition
data formats
(IEC 62680-1-7:2019)
Interfaces de bus universel en série pour les données et Schnittstellen des Universellen Seriellen Busses für Daten
l'alimentation électrique - Partie 1-7: Composants communs und Energie - Teil 1-7: Gemeinsame Komponenten - USB
- Définition de classes de dispositifs USB Audio 3.0 pour Audio 3.0 Geräteklassendefinition Datenformate
formats de données (IEC 62680-1-7:2019)
(IEC 62680-1-7:2019)
This European Standard was approved by CENELEC on 2019-10-24. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62680-1-7:2019 E

European foreword
The text of document 100/3159/CDV, future edition 1 of IEC 62680-1-7, prepared by IEC/TC 100
"Audio, video and multimedia systems and equipment" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN IEC 62680-1-7:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-07-24
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-10-24
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62680-1-7:2019 was approved by CENELEC as a
European Standard without any modification.

IEC 62680-1-7 ®
Edition 1.0 2019-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Universal serial bus interfaces for data and power –

Part 1-7: Common components – USB Audio 3.0 device class definition data

formats
Interfaces de bus universel en série pour les données et l'alimentation

électrique –
Partie 1-7: Composants communs – Définition de classes de dispositifs USB

Audio 3.0 pour formats de données

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.160; 35.100.20 ISBN 978-2-8322-7243-5

– 2 – IEC 62680-1-7–: 2012 – 9
© USB-IF:1997-2016
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
UNIVERSAL SERIAL BUS INTERFACES FOR DATA AND POWER –

Part 1-7: Common components –
USB Audio 3.0 device class definition data formats

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62680-1-7 has been prepared by technical area 18: Multimedia
home systems and applications for end-user networks, of IEC technical committee 100: Audio,
video and multimedia systems and equipment.
The text of this standard was prepared by the USB Implementers Forum (USB-IF). The
structure and editorial rules used in this publication reflect the practice of the organization
which submitted it.
The text of this International Standard is based on the following documents:
CDV Report on voting
100/3159/CDV 100/3229/RVC
Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
Copyright © 1997-2016 USB Implementers Forum, Inc. All rights reserved.

IEC– 63 268– 0-1-7:2019 – 3 –
© USB-IF:1997-2016
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
Copyright © 1997-2016 USB Implementers Forum, Inc. All rights reserved.

– 4 – IEC 62680-1-7–: 2014 – 9
© USB-IF:1997-2016
INTRODUCTION
The IEC 62680 series is based on a series of specifications that were originally developed by the USB
Implementers Forum (USB-IF). These specifications were submitted to the IEC under the auspices of
a special agreement between the IEC and the USB-IF.
This standard is the USB-IF publication USB Device Class Definition for Audio Data Formats Release
3.0.
The USB Implementers Forum, Inc.(USB-IF) is a non-profit corporation founded by the group of
companies that developed the Universal Serial Bus specification. The USB-IF was formed to provide a
support organization and forum for the advancement and adoption of Universal Serial Bus technology.
The Forum facilitates the development of high-quality compatible USB peripherals (devices), and
promotes the benefits of USB and the quality of products that have passed compliance testing.
ANY USB SPECIFICATIONS ARE PROVIDED TO YOU "AS IS, "WITH NO WARRANTIES
WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NON-INFRINGEMENT,
OR FITNESS FOR ANY PARTICULAR PURPOSE. THE USB IMPLEMENTERS FORUM AND THE
AUTHORS OF ANY USB SPECIFICATIONS DISCLAIM ALL LIABILITY, INCLUDING LIABILITY
FOR INFRINGEMENT OF ANY PROPRIETARY RIGHTS, RELATING TO USE OR
IMPLEMENTATION OR INFORMATION IN THIS SPECIFICAITON.
THE PROVISION OF ANY USB SPECIFICATIONS TO YOU DOES NOT PROVIDE YOU WITH ANY
LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL
PROPERTY RIGHTS.
Entering into USB Adopters Agreements may, however, allow a signing company to participate in a
reciprocal, RAND-Z licensing arrangement for compliant products. For more information, please see:
https://www.usb.org/documents
IEC DOES NOT TAKE ANY POSITION AS TO WHETHER IT IS ADVISABLE FOR YOU TO ENTER
INTO ANY USB ADOPTERS AGREEMENTS OR TO PARTICIPATE IN THE USB IMPLEMENTERS
FORUM.”
Copyright © 1997-2016 USB Implementers Forum, Inc. All rights reserved.

IEC– 65 268– 0-1-7:2019 – 5 –
© USB-IF:1997-2016
UNIVERSAL SERIAL BUS
DEVICE CLASS DEFINITION
FOR
AUDIO DATA FORMATS
Release 3.0
September 22, 2016
Copyright © 1997-2016 USB Implementers Forum, Inc. All rights reserved.

– 6 – IEC 62680-1-7–: 2016 – 9
© USB-IF:1997-2016
SCOPE OF THIS RELEASE
This document is the Release 3.0 of this device class definition.
CONTRIBUTORS
Joe Scanlon Advanced Micro Devices
Rhoads Hollowell Apple Inc.
Girault Jones Apple Inc.
Matthew X. Mora Apple Inc.
Tzung-Dar Tsai C-Media Electronics, Inc.
Brad Lambert Cirrus Logic, Inc.
Dan Bogard Conexant Systems, Inc.
Pete Burgers DisplayLink (UK), Ltd.
David Roh Dolby Laboratories, Inc.
Leng Ooi Google, Inc.
Pierre-Louis Bossart Intel Corporation
David Hines Intel Corporation
Abdul Rahman Ismail (Co-Chair) Intel Corporation
Devon Worrell Intel Corporation
Chandrashekhar Rao Logitech, Inc.
Terry Moore MCCI Corporation
Alex Lin MediaTek, Inc.
Bala Sivakumar Microsoft Corporation
Geert Knapen (Co-Chair & Editor) NXP Semiconductors
PL Mobile Audio
411 E. Plumeria drive
San Jose, CA 95134, USA
E-mail: [e-mail]
James Goel Qualcomm, Inc.
Andre Schevciw Qualcomm, Inc.
Jin-Sheng Wang Qualcomm, Inc.
Morten Christiansen Synopsys
REVISION HISTORY
Revision Date Filename Description
1.0 Mar. 18, 98 Frmts10.pdf Release 1.0
2.0 May. 31, 06 Frmts20 final.pdf Release 2.0
3.0 Sep. 22, 16 Frmts30.pdf Release 3.0

Copyright © 1997-2016 USB Implementers Forum, Inc. All rights reserved.

IEC– 67 268– 0-1-7:2019 – 7 –
© USB-IF:1997-2016
Copyright © 1997-2016 USB Implementers Forum, Inc.
All rights reserved.
INTELLECTUAL PROPERTY DISCLAIMER
A LICENSE IS HEREBY GRANTED TO REPRODUCE THIS SPECIF
...