iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 50157-1:1998

(Main)

Domestic and similar electronic equipment interconnection requirements: AV.link - Part 1: General

Domestic and similar electronic equipment interconnection requirements: AV.link - Part 1: General

Standardisation structure of the AV.link: Within the AV.link chain concept (see EN 50157-2-1) a control signal line at contact 10 of the PERITELEVISION connector is defined. Within this control signal line a bit-structure is defined introducing different modes of operation which introduces the following operation capabilities : basic capability for automatic selection of devices and automatic signal quality matching with respect to the delivered and received signals (such as e.g. R, G, B; Y/C and CVBS whereby R,G,B has the highest picture quality, Y/C is the next one and CVBS is the lowest), this part, described in EN 50157-2-1, is the base for the interconnection principle (chain concept) and is mandatory for all products implementing the parts of this standard. basic AV-system oriented commands which are meant for easy use of an AV-system with respect to the interconnection and inter-operability (EN 50157-2-2), system applications (EN 50157-2-3) future extensions

Kennwerte für die Kleinsignalverbindung zwischen elektronischen Geräten für den Heimgebrauch und ähnliche Anwendungen: AV.link - Teil 1: Allgemeines

Spécification des interconnexions des équipements électroniques domestiques et à usage analogue: AV.link - Partie 1: Généralités

Domestic and similar electronic equipment interconnection requirements: AV.link -- Part 1: General

General Information

Status
Published
Publication Date
05-Jul-1998
ICS
33.160.30 - Audio systems
33.160.40 - Video systems
Technical Committee
CLC/TC 100X - Audio, video and multimedia systems and equipment and related sub-systems
Drafting Committee
IEC/TC 100 - IEC_TC_100
Parallel Committee
IEC/TC 100 - IEC_TC_100
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
28-Sep-2022
Ref Project
SIST EN 50157-1:1999 - Domestic and similar electronic equipment interconnection requirements: AV.link -- Part 1: General

Buy Standard

EN 50157-1:1999EN 50157-1:1999
PreviousNext
Standard
EN 50157-1:1999
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-1999
Domestic and similar electronic equipment interconnection requirements: AV.link -
- Part 1: General
Domestic and similar electronic equipment interconnection requirements: AV.link -- Part
1: General
Kennwerte für die Kleinsignalverbindung zwischen elektronischen Geräten für den
Heimgebrauch und ähnliche Anwendungen: AV.link -- Teil 1: Allgemeines
Spécification des interconnexions des équipements électroniques domestiques et à
usage analogue: AV.link -- Partie 1: Généralités
Ta slovenski standard je istoveten z: EN 50157-1:1998
ICS:
33.160.40 Video sistemi Video systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

-------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 50157-2-2:1998(Main)
Domestic and similar electronic equipment interconnection requirements: AV.link - Part 2-2: Basic system oriented commands
SIST EN 50157-2-2:2001

AV.link devices may communicate with each other in AV.link mode 2 by sending and receiving basic system oriented commands. The AV.link mode 2 communication takes place via the AV.link on contact 10 of the peri-television connector as specified in EN 50049-1. By sending AV.link system oriented commands a device may control some basic functions of other devices. For instance an AV.link television may control some functions of an AV.link Video Cassette Recorder. This document specifies the AV.link communication protocols and the basic AV.link commands within mode 2

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50157-2-3:1998(Main)
Domestic and similar electronic equipment interconnection requirements: AV.link - Part 2-3: System oriented application
SIST EN 50157-2-3:2001

AV.link devices may communicate with each other in AV.link mode 2 by sending and receiving basic system oriented commands. The AV.link mode 2 communication takes place via the AV.link on contact 10 of the peri-television connector as specified in EN 50049-1. By sending AV.link system oriented commands a device may control some basic functions of other devices. For instance an AV.link television may control some functions of an AV.link Video Cassette Recorder. This document specifies the AV.link communication protocols and the basic AV.link commands within mode

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50157-2-1:1998(Main)
Domestic and similar electronic equipment interconnection requirements: AV.link - Part 2-1: Signal quality matching and automatic selection of source devices
SIST EN 50157-2-1:1999

This standard specifies an extension (with the possibility to start with only two devices as a point-to-point interconnection (only a Display unit combined with a low end VTR) and than building it up) towards a chain configuration (serial interconnection of devices) with respect to the existing CENELEC standard EN 50049-1 which specifies only the characteristics of the point-to-point interconnection system for audiovisual equipment. This standard defines the interconnection characteristics of peritelevision devices which are configured in the chain principle. This standard makes use of a control signal at contact 10 which gives the possibility for automatic source de-selection and quality matching of AV-signals. This standard describes the AVC-signals in line with EN 50049-1. This standard gives system and device oriented requirements which have to be fulfilled if use is made of the logo related to this standard to ensure the customer a certain signal quality is achieved. The AV.link logo is defined in EN 50157-1. This standard gives the possibility to have a bi-directional interconnection of Y/C signals. This standard gives the possibility to have a bi-directional control of the aspect ratio of 16:9 and 4:3

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50157-2-2:1998(Main)
Domestic and similar electronic equipment interconnection requirements: AV.link - Part 2-2: Basic system oriented commands
SIST EN 50157-2-2:2001

AV.link devices may communicate with each other in AV.link mode 2 by sending and receiving basic system oriented commands. The AV.link mode 2 communication takes place via the AV.link on contact 10 of the peri-television connector as specified in EN 50049-1. By sending AV.link system oriented commands a device may control some basic functions of other devices. For instance an AV.link television may control some functions of an AV.link Video Cassette Recorder. This document specifies the AV.link communication protocols and the basic AV.link commands within mode 2

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50157-2-3:1998(Main)
Domestic and similar electronic equipment interconnection requirements: AV.link - Part 2-3: System oriented application
SIST EN 50157-2-3:2001

AV.link devices may communicate with each other in AV.link mode 2 by sending and receiving basic system oriented commands. The AV.link mode 2 communication takes place via the AV.link on contact 10 of the peri-television connector as specified in EN 50049-1. By sending AV.link system oriented commands a device may control some basic functions of other devices. For instance an AV.link television may control some functions of an AV.link Video Cassette Recorder. This document specifies the AV.link communication protocols and the basic AV.link commands within mode

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50157-2-1:1998(Main)
Domestic and similar electronic equipment interconnection requirements: AV.link - Part 2-1: Signal quality matching and automatic selection of source devices
SIST EN 50157-2-1:1999

This standard specifies an extension (with the possibility to start with only two devices as a point-to-point interconnection (only a Display unit combined with a low end VTR) and than building it up) towards a chain configuration (serial interconnection of devices) with respect to the existing CENELEC standard EN 50049-1 which specifies only the characteristics of the point-to-point interconnection system for audiovisual equipment. This standard defines the interconnection characteristics of peritelevision devices which are configured in the chain principle. This standard makes use of a control signal at contact 10 which gives the possibility for automatic source de-selection and quality matching of AV-signals. This standard describes the AVC-signals in line with EN 50049-1. This standard gives system and device oriented requirements which have to be fulfilled if use is made of the logo related to this standard to ensure the customer a certain signal quality is achieved. The AV.link logo is defined in EN 50157-1. This standard gives the possibility to have a bi-directional interconnection of Y/C signals. This standard gives the possibility to have a bi-directional control of the aspect ratio of 16:9 and 4:3

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60034-9:2024(Main)
Rotating electrical machines - Part 9: Noise limits
SIST EN IEC 60034-9:2025

IEC 60034-9:2021 specifies test methods for the determination of sound power level of rotating electrical machines and specifies maximum A-weighted sound power levels for factory acceptance testing of network-supplied, rotating electrical machines in accordance with lEC 60034-1, having methods of cooling according to lEC 60034-6 and degrees of protection according to lEC 60034-5, and having the following characteristics: - standard design, either AC or DC, without additional special electrical, mechanical, or acoustical modifications intended to reduce the sound power level - rated output from 1 kW (or kVA) up to and including 5 500 kW (or kVA) - rated speed not greater than 3 750 min–1 This fifth edition cancels and replaces the fourth edition, published in 2003 and its amendment 1, published in 2007. This edition includes the following significant technical changes with respect to the previous edition: a) In Table 2 and Table 3 cooling methods IC01, IC11, IC21 and IC31, IC71, IC81 are now covered. b) This edition adds Table 3 for 60 Hz machines, whereas Table 2, which covers only 50 Hz machines, has no change in levels. c) In Table 3, grade A is added to harmonize the highest levels seen in IEC and NEMA, whereas grade B was added to harmonize the lowest, more restrictive levels seen in IEC and NEMA. d) The clause “Determination of noise increments caused by converter supply” has been shifted to Annex B and renamed “Information on typical noise increments caused by converter supply”.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60034-12:2024(Main)
Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
SIST EN IEC 60034-12:2025

IEC 60034-12:2024 is available as IEC 60034-12:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60034-12:2024 specifies the parameters for eight designs of starting performance of single-speed three-phase 50 Hz or 60 Hz cage induction motors in accordance with IEC 60034‑1 that: - have a rated voltage up to 1 000 V; - are intended for direct-on-line or star-delta starting; - are rated on the basis of duty type S1; - are constructed to any degree of protection as defined in IEC 60034-5 and explosion protection. This document also applies to dual voltage motors provided that the flux saturation level is the same for both voltages. This fourth edition cancels and replaces the third edition published in 2016. Aligned with the requirements for explosion protected motors from TC31 WG27 - new clause on methods for measuring locked-rotor current and torque; - new informative annex on the general current and torque characteristics with locked rotor; - new informative annex on correction of voltage and frequency; - aligned with the requirements for explosion protected motors from TC31 WG27.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60335-2-39:2024(Main)
Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans
SIST EN IEC 60335-2-39:2025

IEC 60335-2-39:2012 deals with the safety of electrically operated commercial multi-purpose cooking pans not intended for household and similar use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances. This standard also deals with pressurized appliances and appliances with pressurized parts. These appliances are used for processing food for commercial consumption, for example in kitchens of restaurants, canteens, hospitals and in commercial enterprises such as bakeries, butcheries, etc. The electrical part of appliances making use of other forms of energy is also within the scope of this standard. As far as is practicable, this standard deals with the common hazards presented by these types of appliances. Attention is drawn to the fact that for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary. The principal changes in this edition as compared with the fifth edition of IEC 60335-2-39 are as follows (minor changes are not listed): - addition to definition of portable appliances, atmospheric multi-purpose cooking and rated pressure; - deletion of equipotential symbol 5021 of IEC 60417 covered by Part 1; - addition of instructions for multi-purpose cooking pans; - modification on leakage current permissible for portable class l appliances; - addition to abnormal test requirements; - addition to mechanical hazard test for multi-purpose cooking pans; - addition of construction test for multi-purpose cooking pans; - addition to construction requirements for lids and theirs grips; - addition to construction requirements for positioning of pressure reliefs; - addition to construction's fixed appliances which are moved forward and backward for cleaning purposes.
The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of publication. Keywords: Multi-purpose cooking pans.

  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60335-2-40:2024(Main)
Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
SIST EN IEC 60335-2-40:2025

This European Standard deals with the safety of electric heat pumps, sanitary hot water heat pumps and air conditioners, incorporating motor-compressors as well as hydronic fan coils units, dehumidifiers (with or without motor-compressors), thermoelectric heat pumps and partial units. Their maximum rated voltage being not more than 300 V for single phase appliances and 600 V for multi-phase appliances. Appliances not intended for normal household use but which nevertheless can be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard.

  • Draft
    158 pages
    English language
    sale 10% off
    e-Library read for
    1 day