iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 50157-2-3:1998

(Main)

Domestic and similar electronic equipment interconnection requirements: AV.link - Part 2-3: System oriented application

Domestic and similar electronic equipment interconnection requirements: AV.link - Part 2-3: System oriented application

AV.link devices may communicate with each other in AV.link mode 2 by sending and receiving basic system oriented commands. The AV.link mode 2 communication takes place via the AV.link on contact 10 of the peri-television connector as specified in EN 50049-1. By sending AV.link system oriented commands a device may control some basic functions of other devices. For instance an AV.link television may control some functions of an AV.link Video Cassette Recorder. This document specifies the AV.link communication protocols and the basic AV.link commands within mode

Kennwerte für die Kleinsignalverbindung zwischen elektronischen Geräten für den Heimgebrauch und ähnliche Anwendungen: AV.link - Teil 2-3: Systemorientierte Anwendung

Spécification des interconnexions des équipements électroniques domestiques et à usage analogue: AV.link - Partie 2-3: Application orientée système

Domestic and similar electronic equipment interconnection requirements: AV link - Part 2-3: System oriented application

General Information

Status
Published
Publication Date
23-Aug-1998
Withdrawal Date
31-Jul-1999
ICS
33.160.30 - Audio systems
33.160.40 - Video systems
Technical Committee
CLC/TC 100X - Audio, video and multimedia systems and equipment and related sub-systems
Drafting Committee
IEC/TC 100 - IEC_TC_100
Parallel Committee
IEC/TC 100 - IEC_TC_100
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
28-Sep-2022
Ref Project
SIST EN 50157-2-3:2001 - Domestic and similar electronic equipment interconnection requirements: AV.link -- Part 2-3: System oriented application

Buy Standard

EN 50157-2-3:2001EN 50157-2-3:2001
PreviousNext
Standard
EN 50157-2-3:2001
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50157-2-3:2001
01-marec-2001
Domestic and similar electronic equipment interconnection requirements: AV link -
Part 2-3: System oriented application
Domestic and similar electronic equipment interconnection requirements: AV.link -- Part
2-3: System oriented application
Kennwerte für die Kleinsignalverbindung zwischen elektronischen Geräten für den
Heimgebrauch und ähnliche Anwendungen: AV.link -- Teil 2-3: Systemorientierte
Anwendung
Spécification des interconnexions des équipements électroniques domestiques et à
usage analogue: AV.link -- Partie 2-3: Application orientée système
Ta slovenski standard je istoveten z: EN 50157-2-3:1998
ICS:
33.160.40 Video sistemi Video systems
SIST EN 50157-2-3:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

S
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 50157-2-1:1998(Main)
Domestic and similar electronic equipment interconnection requirements: AV.link - Part 2-1: Signal quality matching and automatic selection of source devices
SIST EN 50157-2-1:1999

This standard specifies an extension (with the possibility to start with only two devices as a point-to-point interconnection (only a Display unit combined with a low end VTR) and than building it up) towards a chain configuration (serial interconnection of devices) with respect to the existing CENELEC standard EN 50049-1 which specifies only the characteristics of the point-to-point interconnection system for audiovisual equipment. This standard defines the interconnection characteristics of peritelevision devices which are configured in the chain principle. This standard makes use of a control signal at contact 10 which gives the possibility for automatic source de-selection and quality matching of AV-signals. This standard describes the AVC-signals in line with EN 50049-1. This standard gives system and device oriented requirements which have to be fulfilled if use is made of the logo related to this standard to ensure the customer a certain signal quality is achieved. The AV.link logo is defined in EN 50157-1. This standard gives the possibility to have a bi-directional interconnection of Y/C signals. This standard gives the possibility to have a bi-directional control of the aspect ratio of 16:9 and 4:3

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50157-2-2:1998(Main)
Domestic and similar electronic equipment interconnection requirements: AV.link - Part 2-2: Basic system oriented commands
SIST EN 50157-2-2:2001

AV.link devices may communicate with each other in AV.link mode 2 by sending and receiving basic system oriented commands. The AV.link mode 2 communication takes place via the AV.link on contact 10 of the peri-television connector as specified in EN 50049-1. By sending AV.link system oriented commands a device may control some basic functions of other devices. For instance an AV.link television may control some functions of an AV.link Video Cassette Recorder. This document specifies the AV.link communication protocols and the basic AV.link commands within mode 2

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50157-1:1998(Main)
Domestic and similar electronic equipment interconnection requirements: AV.link - Part 1: General
SIST EN 50157-1:1999

Standardisation structure of the AV.link: Within the AV.link chain concept (see EN 50157-2-1) a control signal line at contact 10 of the PERITELEVISION connector is defined. Within this control signal line a bit-structure is defined introducing different modes of operation which introduces the following operation capabilities : basic capability for automatic selection of devices and automatic signal quality matching with respect to the delivered and received signals (such as e.g. R, G, B; Y/C and CVBS whereby R,G,B has the highest picture quality, Y/C is the next one and CVBS is the lowest), this part, described in EN 50157-2-1, is the base for the interconnection principle (chain concept) and is mandatory for all products implementing the parts of this standard. basic AV-system oriented commands which are meant for easy use of an AV-system with respect to the interconnection and inter-operability (EN 50157-2-2), system applications (EN 50157-2-3) future extensions

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50157-2-1:1998(Main)
Domestic and similar electronic equipment interconnection requirements: AV.link - Part 2-1: Signal quality matching and automatic selection of source devices
SIST EN 50157-2-1:1999

This standard specifies an extension (with the possibility to start with only two devices as a point-to-point interconnection (only a Display unit combined with a low end VTR) and than building it up) towards a chain configuration (serial interconnection of devices) with respect to the existing CENELEC standard EN 50049-1 which specifies only the characteristics of the point-to-point interconnection system for audiovisual equipment. This standard defines the interconnection characteristics of peritelevision devices which are configured in the chain principle. This standard makes use of a control signal at contact 10 which gives the possibility for automatic source de-selection and quality matching of AV-signals. This standard describes the AVC-signals in line with EN 50049-1. This standard gives system and device oriented requirements which have to be fulfilled if use is made of the logo related to this standard to ensure the customer a certain signal quality is achieved. The AV.link logo is defined in EN 50157-1. This standard gives the possibility to have a bi-directional interconnection of Y/C signals. This standard gives the possibility to have a bi-directional control of the aspect ratio of 16:9 and 4:3

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50157-2-2:1998(Main)
Domestic and similar electronic equipment interconnection requirements: AV.link - Part 2-2: Basic system oriented commands
SIST EN 50157-2-2:2001

AV.link devices may communicate with each other in AV.link mode 2 by sending and receiving basic system oriented commands. The AV.link mode 2 communication takes place via the AV.link on contact 10 of the peri-television connector as specified in EN 50049-1. By sending AV.link system oriented commands a device may control some basic functions of other devices. For instance an AV.link television may control some functions of an AV.link Video Cassette Recorder. This document specifies the AV.link communication protocols and the basic AV.link commands within mode 2

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50157-1:1998(Main)
Domestic and similar electronic equipment interconnection requirements: AV.link - Part 1: General
SIST EN 50157-1:1999

Standardisation structure of the AV.link: Within the AV.link chain concept (see EN 50157-2-1) a control signal line at contact 10 of the PERITELEVISION connector is defined. Within this control signal line a bit-structure is defined introducing different modes of operation which introduces the following operation capabilities : basic capability for automatic selection of devices and automatic signal quality matching with respect to the delivered and received signals (such as e.g. R, G, B; Y/C and CVBS whereby R,G,B has the highest picture quality, Y/C is the next one and CVBS is the lowest), this part, described in EN 50157-2-1, is the base for the interconnection principle (chain concept) and is mandatory for all products implementing the parts of this standard. basic AV-system oriented commands which are meant for easy use of an AV-system with respect to the interconnection and inter-operability (EN 50157-2-2), system applications (EN 50157-2-3) future extensions

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61169-70:2024(Main)
Radio-frequency connectors - Part 70: Sectional specification for series HD-BNC radio-frequency coaxial connectors - Characteristic Impedance 75 Ω
SIST EN IEC 61169-70:2024

IEC 61169-70:2024, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) of HD-BNC series RF coaxial connectors together with the pro forma blank detail specification. HD-BNC series connectors with characteristic impedance of 75 Ω are used with RF cables or micro-strips in microwave, telecommunication, wireless and other fields. The operating frequency limit is up to 18 GHz. It also prescribes mating face dimensions for general purpose connectors, gauging information and tests selected from IEC 61169-1, applicable to all detail specifications relating to series HD-BNC RF connectors. This specification indicates the recommended performance characteristics to be considered when writing a detail specification and it covers test schedules and inspection requirements for assessment levels M and H.

  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61300-2-44:2024(Main)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices and components
SIST EN IEC 61300-2-44:2024

IEC 61300-2-44:2024 specifies a test to determine the influence of flexing under tensile load of the strain relief of fibre optic interconnecting devices or components. The intention is to simulate the number of flexing cycles which would typically be experienced during service life. This test is applied to both single fibre cable and multiple fibre cable. This fourth edition cancels and replaces the third edition published in 2013. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) replaced active monitoring with transient loss for measurements during test; b) harmonized recommended severities according to IEC 61753-1.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63305:2024(Main)
Underwater acoustics - Calibration of acoustic wave vector receivers in the frequency range 5 Hz to 10 kHz
SIST EN IEC 63305:2024

IEC 63305:2024 specifies methods and procedures for calibration of vector receivers in the frequency range 5 Hz to 10 kHz, which are applicable to vector receivers based on the two different principles. In addition, it describes an absolute method of inertial vector receiver calibration in air using optical interferometry. Usually, acoustic wave vector receivers are designed and constructed based on one of two principles. One is the sound pressure difference (gradient) principle. When measuring with this sensor, the vector receiver is rigidly fixed on a mount and supported in water. The other is the co-vibrating (inertial) principle. When measuring with this sensor, the vector receiver is suspended on a mount and supported in water in a non-rigid manner, which allows the vector receiver co-vibrate in the same direction as the sound particle in the sound wave field. Many methods have been used to calibrate vector receivers, such as free-field calibration, calibration in standing wave tube and calibration in a travelling wave tube.

  • Draft
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60704-2-14:2013/A2:2024(Amendment)
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-14: Particular requirements for refrigerators, frozen-food storage cabinets and food freezers
SIST EN 60704-2-14:2013/A2:2024
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day