EN 61076-3-110:2012

Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 1 000 MHz

IEC 61076-3-110:2012 This detail specification covers mechanical and environmental requirements, and electrical transmission requirements for frequencies up to 1 000 MHz. These connectors can be used as category 7A connectors in class FA cabling systems specified in ISO/IEC 11801. The connectors are intermateable with IEC 60603-7 series connectors (see 3.3). The connectors are interoperable with IEC 60603-7-7 and IEC 60603-7-71 connectors (see 3.4). The connectors are backward compatible with IEC 60603-7-7 and IEC 60603-7-71 connectors (see 3.5). This second edition cancels and replaces the first edition, issued in 2007, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - changes in 4.5 regarding electrical transmission performance i.e. return loss, among other specific changes, in compliance to the requirements of ISO/IEC 11801, - updated text and format to be consistent with the referenced standards, - removal of duplication of requirements in the IEC 60603-7 standard series, introduction of transmission performance testing procedures as specified by IEC 60512-28-100. Keywords: Free connectors, Fixed connectors

Steckverbinder für elektronische Einrichtungen - Produktanforderungen - Teil 3-110: Bauartspezifikation für geschirmte freie und feste Steckverbinder für Datenübertragungen bis 1 000 MHz

Connecteurs pour équipements électroniques - Exigences de produit - Partie 3-110: Spécification particulière pour les fiches et les embases blindées pour la transmission de données à des fréquences jusqu'à 1 000 MHz

La CEI 61076-3-110:2012 Cette spécification particulière couvre les exigences mécaniques et environnementales, et les exigences de transmission électrique pour des fréquences jusqu'à 1 000 MHz. Ces connecteurs peuvent être utilisés comme connecteurs de catégorie 7A dans les systèmes de câblage de classe FA spécifiés dans l'ISO/CEI 11801. Ces connecteurs sont accouplables avec les connecteurs de la série CEI 60603-7 (voir 3.3). Les connecteurs sont interopérables avec les connecteurs CEI 60603-7-7 et CEI 60603-7-71 (voir 3.4). Les connecteurs offrent une compatibilité amont avec les connecteurs CEI 60603-7-7 et CEI 60603-7-71 (voir 3.5). Cette deuxième édition annule et remplace la première édition, publiée en 2007, dont elle constitue une révision technique. Cette édition inclut les changements techniques significatifs suivants par rapport à l'édition précédente: - Des modifications apportées en 4.5 concernant les paramètres de transmission électrique, c'est-à-dire, entre autres, des changements spécifiques, en conformité aux exigences de l'ISO/CEI 11801; - mise à jour du texte et du format pour être compatibles avec les normes référencées; - suppression de la duplication des exigences dans la série de normes CEI 60603-7; - introduction de procédures sur les essais de performances de transmission, comme spécifié par la CEI 60512-28-100. Mots clé: Fiches, Embases

Konektorji za elektronsko opremo - Zahteve za izdelek - 3-110. del: Podrobna specifikacija za zaslonjene, proste in fiksne konektorje za prenos podatkov s frekvencami do 1000 MHz

Ta del standarda IEC 61076 je podrobna specifikacija za dvodelne konektorje. Ta podrobna specifikacija zajema mehanske in okoljske zahteve ter zahteve glede električnega prenosa za frekvence do 1000 MHz. Ti konektorji se lahko uporabijo kot konektorji kategorije 7A v kabelskih sistemih razreda FA, določenih v standardu ISO/IEC 11801.1 Lahko se spojijo s konektorji iz skupine standardov IEC 60603-7. Konektorji se lahko spojijo s konektorji IEC 60603-7-7 in IEC 60603-7-71 (glej točko 3.4). Konektorji so povratno združljivi s konektorji IEC 60603-7-7 in IEC 60603-7-71.

General Information

• Status: Withdrawn
• Publication Date: 26-Jul-2012
• Withdrawal Date: 10-Jun-2015
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: CLC/SR 48B - Connectors
• Drafting Committee: IEC/SC 48B - IEC_SC_48B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 04-Oct-2019
• Completion Date: 04-Oct-2019
• Ref Project: SIST EN 61076-3-110:2012 - Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 1000 mhz

Relations

• Replaces: EN 61076-3-110:2008 - Connectors for electronic equipment - Product requirements - Part 3-110: Rectangular connectors - Detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 1 000 MHz
• Effective Date: 29-Jan-2023
• Replaced By: EN 61076-3-110:2016 - Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz
• Effective Date: 23-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2012
1DGRPHãþD
SIST EN 61076-3-110:2008
Konektorji za elektronsko opremo - Zahteve za izdelek - 3-110. del: Podrobna
specifikacija za zaslonjene, proste in fiksne konektorje za prenos podatkov s
frekvencami do 1000 MHz
Connectors for electronic equipment - Product requirements - Part 3-110: Detail
specification for shielded, free and fixed connectors for data transmission with
frequencies up to 1000 mhz
Steckverbinder für elektronische Einrichtungen - Produktanforderungen - Teil 3-110:
Bauartspezifikation für geschirmte freie und feste Steckverbinder für
Datenübertragungen bis 1 000 MHz
Connecteurs pour équipements électroniques - Exigences de produit - Partie 3-110:
Spécification particulière pour les fiches et les embases blindées pour la transmission de
données à des fréquences jusqu’à 1000
Ta slovenski standard je istoveten z: EN 61076-3-110:2012
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61076-3-110
NORME EUROPÉENNE
July 2012
EUROPÄISCHE NORM
ICS 31.220.10 Supersedes EN 61076-3-110:2008

English version
Connectors for electronic equipment -
Product requirements -
Part 3-110: Detail specification for shielded, free and fixed connectors for
data transmission with frequencies up to 1 000 MHz
(IEC 61076-3-110:2012)
Connecteurs pour équipements Steckverbinder für elektronische
électroniques - Einrichtungen -
Exigences de produit - Produktanforderungen -
Partie 3-110: Spécification particulière Teil 3-110: Bauartspezifikation für
pour les fiches et les embases blindées geschirmte freie und feste Steckverbinder
pour la transmission de données à des für Datenübertragungen bis 1 000 MHz
fréquences jusqu'à 1 000 MHz (IEC 61076-3-110:2012)
(CEI 61076-3-110:2012)
This European Standard was approved by CENELEC on 2012-06-11. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61076-3-110:2012 E

Foreword
The text of document 48B/2285/FDIS, future edition 2 of IEC 61076-3-110, prepared by SC 48B,
"Connectors", of IEC TC 48, "Electromechanical components and mechanical structures for electronic
equipment" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61076-
3-110:2012.
The following dates are fixed:
(dop) 2013-03-11
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2015-06-11
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61076-3-110:2008.
110:2008:
– changes in 4.5 regarding electrical transmission performance i.e. return loss, among other specific
changes, in compliance to the requirements of ISO/IEC 11801,
– updated text and format to be consistent with the referenced standards,
– removal of duplication of requirements in the EN 60603-7 series,
– introduction of transmission performance testing procedures as specified by EN 60512-28-100.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61076-3-110:2012 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60068-2-38 NOTE  Harmonized as EN 60068-2-38.
IEC 61076-3:2008 NOTE  Harmonized as EN 61076-3:2008 (not modified).

- 3 - EN 61076-3-110:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

- - Communication cables - Specifications for test EN 50289-1-14 -
methods -
Part 1-14: Electrical test methods - Coupling
attenuation or screening attenuation of
connecting hardware
IEC 60068-1 - Environmental testing - EN 60068-1 -
Part 1: General and guidance
IEC 60512 Series Connectors for electronic equipment - Tests EN 60512-1 Series
and measurements
IEC 60512-23-3 2000 Electromechanical components for electronic EN 60512-23-3 2001
+ corr. April 2003 equipment - Basic testing procedures and
measuring methods -
Part 23-3: Test 23c: Shielding effectiveness of
connectors and accessories
IEC 60512-25-9 2008 Connectors for electronic equipment - Tests EN 60512-25-9 2008
and measurements -
Part 25-9: Signal integrity tests - Test 25i:
Alien crosstalk
IEC 60512-28-100 - Connectors for electronic equipment - Tests EN 60512-28-100 -
and measurements -
Part 28-100: Signal integrity tests up to
1 000 mhz on IEC 60603-7 and IEC 61076-3
series connectors - Tests 28a to 28g

IEC 60603-7 2008 Connectors for electronic equipment - EN 60603-7 2009
Part 7: Detail specification for 8-way,
unshielded, free and fixed connectors

IEC 60603-7-1 2011 Connectors for electronic equipment - EN 60603-7-1 2011
Part 7-1: Detail specification for 8-way,
shielded, free and fixed connectors

IEC 60603-7-7 2010 Connectors for electronic equipment - EN 60603-7-7 2010
Part 7-7: Detail specification for 8-way,
shielded, free and fixed connectors for data
transmission with frequencies up to 600 MHz

IEC 60603-7-71 2010 Connectors for electronic equipment - EN 60603-7-71 2010
Part 7-71: Detail specification for 8-way,
shielded, free and fixed connectors, for data
transmission with frequencies up to 1000 MHz

IEC 61076-1 2006 Connectors for electronic equipment - EN 61076-1 2006
Product requirements -
Part 1: Generic specification
Publication Year Title EN/HD Year
IEC 62153-4-12 - Metallic communication cable test methods - - -
Part 4-12: Electromagnetic compatibility
(EMC) - Coupling attenuation or screening
attenuation of connecting hardware -
Absorbing clamp method
IEC 61076-3-110 ®
Edition 2.0 2012-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Connectors for electronic equipment – Product requirements –

Part 3-110: Detail specification for shielded, free and fixed connectors for data

transmission with frequencies up to 1 000 MHz

Connecteurs pour équipements électroniques – Exigences de produit –

Partie 3-110: Spécification particulière pour les fiches et les embases blindées

pour la transmission de données à des fréquences jusqu’à 1 000 MHz

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX R
ICS 31.220.10 ISBN 978-2-88912-056-7

– 2 – 61076-3-110  IEC:2012
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Technical information . 8
3.1 Terms and definitions . 8
3.2 Interchangeability level . 8
3.3 Intermateability . 8
3.4 Interoperability . 8
3.5 Backward compatibility . 9
3.6 Complete connectors (pairs) . 9
3.7 Fixed connectors . 9
3.8 Free connectors . 9
3.9 Classification into climate categories . 9
3.10 Clearance and creepage distances . 9
3.11 Current carrying capacity . 9
3.12 Marking . 9
4 Dimensional information . 9
4.1 General . 9
4.2 Isometric view and common features . 10
4.3 Mating information . 10
4.4 Fixed connectors . 10
4.4.1 Fixed connectors common dimensions . 10
4.4.2 Fixed connector styles . 10
4.5 Free connectors . 11
4.6 Terminations . 11
4.7 Mounting information . 11
4.7.1 Mounting information for fixed connectors . 11
4.7.2 Mounting information for free connectors . 11
4.8 Gauges . 12
4.8.1 General . 12
4.8.2 Mechanical function, engaging/separating/insertion/withdrawal force
gauges . 12
4.8.3 Probes . 12
4.8.4 Contact resistance gauge . 12
4.8.5 Test panel (for voltage proof test) . 12
4.8.6 Test panel (for EMC/crosstalk, etc.) . 12
5 Characteristics . 12
5.1 General . 12
5.2 Pin and pair grouping assignment . 12
5.3 Climatic category . 13
5.4 Electrical characteristics .
...