EN 60695-4:2012

Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products

IEC 60695-4:2012 The terms and definitions in this standard are applicable to fire tests for electrotechnical products. This basic safety publication is intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. The requirements, test methods or test conditions of this basic safety publication will not apply unless specifically referred to or included in the relevant publications. This fourth edition of IEC 60695-4 cancels and replaces the third edition issued in 2005. It constitutes a technical revision. The main changes with respect to the previous edition are as follows: - The terms and definitions that are not specifically electrotechnical and that are either identical or equivalent to those in ISO 13943:2008 have been deleted. - The terms and definitions that are specifically electrotechnical and that are in ISO 13943:2008 have been included for the convenience of the user. - Some new terms have been included. A list of all the parts in the IEC 60695 series, under the general title Fire hazard testing, can be found on the IEC website. This standard has the status of a basic safety publication in accordance with IEC Guide 104 and ISO/IEC Guide 51. Keywords: Fire Hazard Testing, Terminology.

Prüfungen zur Beurteilung der Brandgefahr - Teil 4: Terminologie der Brandprüfungen elektrotechnischer Produkte

Essais relatifs aux risques du feu - Partie 4: Terminologie relative aux essais au feu pour les produits électrotechniques

La CEI 60695-4:2012 Les termes et définitions définis dans la présente norme sont applicables aux essais au feu pour les produits électrotechniques. Cette publication fondamentale de sécurité est destinée à être utilisée par les comités d'études pour l'établissement de leurs normes, conformément aux principes exposés dans le Guide CEI 104 et dans le Guide ISO/CEI 51. L'une des responsabilités d'un comité d'études consiste, le cas échéant, à utiliser les publications fondamentales de sécurité dans le cadre de l'élaboration de ses publications. Les exigences, méthodes d'essai ou conditions d'essai de cette publication fondamentale de sécurité ne s'appliquent pas, sauf si elles sont spécifiquement citées en référence ou incluses dans les publications correspondantes. Cette quatrième édition de la CEI 60695-4 annule et remplace la troisième édition parue en 2005. Elle constitue une révision technique. Les principales modifications par rapport à l'édition antérieure sont indiquées ci-dessous: - Les termes et définitions qui ne concernent pas spécifiquement l'électrotechnique et qui sont soit identiques soit équivalents à ceux de l'ISO 13943:2008 ont été supprimés. - Les termes et définitions qui sont spécifiquement électrotechniques et qui figurent dans l'ISO 13943:2008 ont été inclus dans un souci de commodité pour l'utilisateur. - Quelques nouveaux termes ont été inclus. Une liste de toutes les parties de la série CEI 60695, regroupées sous le titre général Essais relatifs aux risques du feu, peut être consultée sur le site web de la CEI. Cette norme a le statut d'une publication fondamentale de sécurité conformément au Guide CEI 104 et au Guide ISO/CEI 51. Mots clé: Essais relatifs aux risques du feu, Terminologie

Preskušanje požarne ogroženosti - 4. del: Izrazje v zvezi s požarnimi preskusi elektrotehničnih proizvodov

Izrazi in definicije iz tega standarda se uporabljajo za požarne preskuse elektrotehničnih proizvodov. Ta osnovna varnostna publikacija je namenjena tehničnim odborom za pripravo standardov v skladu z načeli vodil IEC Guide 104 in ISO/IEC Guide 51. Ena od odgovornosti tehničnih odborov je, da med pripravo publikacij uporabljajo osnovne varnostne publikacije, kadar je to primerno. Zahteve, preskusne metode ali preskusni pogoji iz te osnovne varnostne publikacije se ne uporabljajo, razen če so izrecno navedeni ali zajeti v ustrezne publikacije.

General Information

• Status: Published
• Publication Date: 02-Aug-2012
• Withdrawal Date: 12-Jun-2015
• ICS: 01.040.13 - Environment. Health protection. Safety (Vocabularies)
• ICS: 29.020 - Electrical engineering in general
• Technical Committee: CLC/SR 89 - Fire hazard testing
• Drafting Committee: IEC/TC 89 - IEC_TC_89
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 03-Aug-2012
• Completion Date: 03-Aug-2012
• Ref Project: SIST EN 60695-4:2012 - Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products

Relations

• Replaces: EN 60695-4:2006 - Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products
• Effective Date: 28-Jan-2023
• Replaced By: EN IEC 60695-4:2021 - Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products
• Effective Date: 17-Aug-2021

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60695-4:2012
01-oktober-2012
1DGRPHãþD
SIST EN 60695-4:2007
3UHVNXãDQMHSRåDUQHRJURåHQRVWLGHO,]UD]MHY]YH]LVSRåDUQLPLSUHVNXVL
HOHNWURWHKQLþQLKSURL]YRGRY
Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical
products
Prüfungen zur Beurteilung der Brandgefahr - Teil 4: Terminologie der Brandprüfungen
elektrotechnischer Produkte
Essais relatifs aux risques du feu - Partie 4: Terminologie relative aux essais au feu pour
les produits électrotechniques
Ta slovenski standard je istoveten z: EN 60695-4:2012
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
29.020 Elektrotehnika na splošno Electrical engineering in
general
SIST EN 60695-4:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60695-4:2012

---------------------- Page: 2 ----------------------

SIST EN 60695-4:2012

EUROPEAN STANDARD
EN 60695-4

NORME EUROPÉENNE
August 2012
EUROPÄISCHE NORM

ICS 01.040.13; 29.020 Supersedes EN 60695-4:2006


English version


Fire hazard testing -
Part 4: Terminology concerning fire tests for electrotechnical products
(IEC 60695-4:2012)


Essais relatifs aux risques du feu -  Prüfungen zur Beurteilung der
Partie 4: Terminologie relative aux essais Brandgefahr -
au feu pour les produits électrotechniques Teil 4: Terminologie der Brandprüfungen
(CEI 60695-4:2012) elektrotechnischer Produkte
(IEC 60695-4:2012)




This European Standard was approved by CENELEC on 2012-06-13. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60695-4:2012 E

---------------------- Page: 3 ----------------------

SIST EN 60695-4:2012
EN 60695-4:2012 - 2 -
Foreword
The text of document 89/1098/FDIS, future edition 4 of IEC 60695-4, prepared by IEC/TC 89 "Fibre
hazard testing" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 60695-4:2012.
The following dates are fixed:
(dop) 2013-03-13
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2015-06-13
• latest date by which the national
standards conflicting with the
document have to be withdrawn

This document supersedes EN 60695-4:2006.

EN 60695-4:2012 includes the following significant technical changes with respect to
EN 60695-4:2006:
- the terms and definitions that are not specifically electrotechnical and that are either identical or
equivalent to those in EN ISO 13943:2010 have been deleted;
- the terms and definitions that are specifically electrotechnical and that are in EN ISO 13943:2010
have been included for the convenience of the user;
- some new terms have been included.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60695-4:2012 was approved by CENELEC as a European
Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 60695-4:2012
- 3 - EN 60695-4:2012
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in wh
...