EN 61010-2-031:1994

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-031: Particular requirements for hand-held probe assemblies for electrical measurement and test

Applies to the following hand-held and hand-manipulated probe assemblies: -low-voltage and high-voltage, non-attenuating probe assemblies (type A) -high-voltage attenuating or divider probe assemblies (type B) -low-voltage attenuating or divider probe assemblies (type C). Has the status of a group safety publication in accordance with IEC Guide 104.

Sicherheitsbestimmungen für elektrische Meß-, Steuer-, Regel- und Laborgeräte - Teil 2-031: Besondere Anforderungen an handgehaltene Meß-, Prüf- und Verbindungsleitungen (Meßzubehör) zum (elektrischen) Messen, Prüfen und Experimentieren

Règles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-031: Prescriptions particulières pour sondes équipées manuelles de mesurage et d'essais électriques

S'applique aux sondes équipées manuelles et manipulables suivantes: - sondes équipées, sans atténuation, à basse tension et à haute tension (type A); - sondes équipées, à atténuateur ou diviseur à haute tension (type B); - sondes équipées à atténuateur ou diviseur à basse tension (type C). A le statut d'une publication groupée de sécurité conformément au Guide 104.

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-031: Particular requirements for hand held probe assemblies for electrical measurement and test (IEC 1010-2-031:1993)

General Information

• Status: Withdrawn
• Publication Date: 17-Aug-1994
• ICS: 19.080 - Electrical and electronic testing
• Technical Committee: CLC/SR 66 - Safety of measuring, control, and laboratory equipment
• Drafting Committee: IEC/TC 66 - IEC_TC_66
• Parallel Committee: IEC/TC 66 - IEC_TC_66
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Feb-2005
• Completion Date: 01-Feb-2005
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Ref Project: SIST EN 61010-2-031:1995 - Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 2-031: Particular requirements for hand-held probe assemblies for electrical measurement and test

Relations

• Replaced By: EN 61010-031:2002 - Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test
• Effective Date: 28-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-031: Particular requirements for hand held probe assemblies for electrical measurement and test (IEC 1010-2-031:1993)Sicherheitsbestimmungen für elektrische Meß-, Steuer-, Regel- und Laborgeräte -- Teil 2-031: Besondere Anforderungen an handgehaltene Meß-, Prüf- und Verbindungsleitungen (Meßzubehör) zum (elektrischen) Messen, Prüfen und ExperimentierenRègles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire -- Partie 2-031: Prescriptions particulières pour sondes équipées manuelles de mesurage et d'essais électriquesSafety requirements for electrical equipment for measurement, control and laboratory use -- Part 2-031: Particular requirements for hand-held probe assemblies for electrical measurement and test71.040.10Kemijski laboratoriji
...