Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics

Describes measurement procedures for current-voltage characteristics of crystalline silicon photovoltaic devices in natural or simulated sunlight. These procedures are applicable to a single solar cell, a sub-assembly of solar cells, or a flat module.

Photovoltaische Einrichtungen - Teil 1: Messen der photovoltaischen Strom-/Spannungskennlinien

Dispositifs photovoltaïques - Partie 1: Mesure des caractéristiques courant-tension des dispositifs photovoltaïques

Décrit les procédures de mesure des caractéristiques courant-tension des dispositifs photovoltaïques au silicium cristallin sous éclairement solaire naturel ou simulé. Ces procédures sont applicables aux cellules solaires individuelles, aux assemblages de cellules solaires et aux modules plans.

Fotonapetostne naprave – 1. del: Merjenje fotonapetostnih tokovno napetostnih karakteristik (IEC 60904-1:2006)

Ta del IEC 60904 predstavlja postopke za merjenje fotonapetostnih, tokovno napetostnih karakteristik fotonapetostnih naprav v naravni ali simulirani sončni svetlobi, ki se nanašajo na samostojno fotonapetostno solarno celico, sestavo fotonapetostnih solarnih celic, ali PV-modulov.

General Information

Status
Withdrawn
Publication Date
23-Nov-2006
Withdrawal Date
30-Sep-2009
Drafting Committee
Parallel Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
30-Oct-2023
Completion Date
30-Oct-2023

Relations

Buy Standard

Standard
EN 60904-1:2007
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-junij-2007
1DGRPHãþD
SIST EN 60904-1:2001
Fotonapetostne naprave – 1. del: Merjenje fotonapetostnih tokovno napetostnih
karakteristik (IEC 60904-1:2006)
Photovoltaic devices -- Part 1: Measurement of photovoltaic current-voltage
characteristics
Photovoltaische Einrichtungen Teil 1: Messen der photovoltaischen Strom
-/Spannungskennlinien (IEC 60904-1:2006)
Dispositifs photovoltaiques Partie 1: Mesure des caractéristiques courant-tension des
dispositifs photovoltaiques (CEI 60904-1:2006)
Ta slovenski standard je istoveten z: EN 60904-1:2006
ICS:
27.160 6RQþQDHQHUJLMD Solar energy engineering
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60904-1
NORME EUROPÉENNE
November 2006
EUROPÄISCHE NORM
ICS 27.160 Supersedes EN 60904-1:1993

English version
Photovoltaic devices
Part 1: Measurement of photovoltaic
current-voltage characteristics
(IEC 60904-1:2006)
Dispositifs photovoltaïques Photovoltaische Einrichtungen
Partie 1: Mesure des caractéristiques Teil 1: Messen der photovoltaischen
courant-tension des dispositifs Strom-/Spannungskennlinien
photovoltaïques (IEC 60904-1:2006)
(CEI 60904-1:2006)
This European Standard was approved by CENELEC on 2006-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60904-1:2006 E
Foreword
The text of document 82/433/FDIS, future edition 2 of IEC 60904-1, prepared by IEC TC 82, Solar
photovoltaic energy systems, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 60904-1 on 2006-10-01.
This European Standard supersedes EN 60904-1:1993.
The main changes with respect to EN 60904-1:1993 are as follows:
– Added object.
– Added normative references.
– Updated original Clause 2 (General Measurement Requirements), removing Figure 1 as it is obsolete.
– Provided more detail and guidance on how to measure in sunlight or simulated sunlight.
– Expanded original Clause 6 (Test Report) with requirements based on ISO 17025.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-10-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60904-1:2006 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 60904-1:2006
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

1) 2)
IEC 60891 - Procedures for temperature and irradiance EN 60891 1994
corrections to measured I-V characteristics
of crystalline silicon photovoltaic devices

1) 2)
IEC 60904-2 - Photovoltaic devices EN 60904-2 1993
Part 2: Requirements for reference solar cells

1) 2)
IEC 60904-3 - Photovoltaic devices EN 60904-3 1993
Part 3: Measurement principles for terrestrial
photovoltaic (PV) solar devices with reference
spectral irradiance data
1) 2)
IEC 60904-5 - Photovoltaic devices EN 60904-5 1995
Part 5: Determination of the equivalent cell
temperature (ECT) of photovoltaic (PV)
devices by the open-circuit voltage method

1) 2)
IEC 60904-6 - Photovoltaic devices EN 60904-6 1994
Part 6: Requirements for reference solar
modules
1) 2)
IEC 60904-7 - Photovoltaic devices EN 60904-7 1998
Part 7: Computation of spectral mismatch
error introduced in the testing of a
photovoltaic device
1)
IEC 60904-9 - Photovoltaic devices - -
Part 9: Solar simulator performance
requirements
1) 2)
IEC 60904-10 - Photovoltaic devices EN 60904-10 1998
Part 10: Methods of linearity measurement

1) 2)
ISO/IEC 17025 - General requirements for the competence EN ISO/IEC 17025 2005
of testing and calibration laboratories

1)
Undated reference.
2)
Valid edition at date of issue.

INTERNATIONAL IEC
STANDARD 60904-1
Second edition
2006-09
Photovoltaic devices –
Part 1:
Measurement of photovoltaic
current-voltage characteristics

© IEC 2006 Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical,
including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
L
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

60904-1  IEC:2006 – 3 –
CONTENTS
FOREWORD.5

1 Scope and object.9
2 Normative references .9
3 General measurement requirements.11
4 Apparatus.13
4.1 For measurements in natural sunlight.13
4.2 For measurements in simulated sunlight.13
5 Measurements in natural sunlight .13
6 Measurement in steady-state simulated sunlight.15
7 Measurement in pulsed simulated sunlight .19
8 Test report.23

60904-1  IEC:2006 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
PHOTOVOLTAIC DEVICES –
Part 1: Measurement of photovoltaic
current-voltage characteristics

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60904-1 has been prepared by IEC technical committee 82: Solar
photovoltaic energy systems.
This second edition cancels and replaces the first edition published in 1987. This edition
constitutes a technical revision.
The main changes with respect to the previous edition are as follows:
– Added object.
– Added normative references.
– Updated original Clause 2 (General Measurement Requirements), removing Figure 1 as it
is obsolete.
– Provided more detail and guidance on how to measure in sunlight or simulated sunlight.
– Expanded original Clause 6 (Test Report) with requirements based on ISO 17025.

60904-1  IEC:2006 – 7 –
The text of this standard is based on the following documents:
FDIS Report on voting
82/433/FDIS 82/450/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of IEC 60904 series, under the general title Photovoltaic devices, can be
found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
60904-1  IEC:2006 – 9 –
PHOTOVOLTAIC DEVICES –
Part 1: Measurement of photovoltaic
current-voltage characteristics

1 Scope and object
This part of IEC 60904 describes procedures for the measurement of current-voltage
characteristics of photovoltaic devices in natural or simulated sunlight. These procedures are
applicable to a single photovoltaic solar cell, a sub-assembly of photovoltaic solar cells, or a
PV module.
NOTE 1 This standard may be applicable to multi-junction test specimens, if each sub-junction generates the
same amount of current as it would under the reference AM1,5 spectrum in IEC 60904-3.
NOTE 2 This standard may be applicable to PV devices designed for use under concentrated irradiation if they
are irradiated using direct normal irradiance and a mismatch correction with respect to a direct normal reference
spectrum is performed.
The purpose of this standard is to lay down basic requirements for the measurement of
current-voltage characteristics of photovoltaic devices, to define procedures for different
measuring techniques in use and to show practices for minimising measurement uncertainty.
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC 60891: Procedures for temperature and irradiance corrections to measured I-V
characteristics of crystalline silicon photovoltaic (PV) devices
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.