Surface cleaning appliances - Part 9: Floor treatment machines with or without traction drive, for commercial use - Methods for measuring the performance

IEC 62885-9:2019 lists the characteristic performance parameters for walk-behind and ride-on floor scrubbers and sweepers and other floor cleaning machines in accordance with IEC 60335-2-72:2016. The intent is to serve the manufacturers in describing parameters for their manuals and their literature. This may include all or some of the parameters listed in this definition document. This first edition of IEC 62885-9 cancels and replaces IEC 62826:2014 and constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 62826:2014 a) reference to a dated version of IEC 60335-2-72 to ensure consistency between the two standards; b) a new calculation for the nominal current consumption in 22.1; c) a new calculation for the maximum net run-time of commercial floor treatment machines in 22.2; d) update of the Bibliography.

Geräte zur Oberflächenreinigung - Teil 9: Bodenbehandlungsmaschinen mit oder ohne Antrieb für den gewerblichen Gebrauch - Verfahren zur Messung der Gebrauchseigenschaften

Appareils de nettoyage des sols - Partie 9: Machines de traitement des sols avec ou sans commande de dispositif de déplacement, à usage commercial –Méthodes de mesure de l'aptitude à la fonction

L'IEC 62885-9:2019 répertorie les paramètres de performances caractéristiques des brosseuses et balayeuses de sol à conducteur à pied et à conducteur porté, et d'autres machines de nettoyage des sols conformément à l'IEC 60335-2-72:2016. Elle a pour objet de présenter aux fabricants les paramètres indiqués dans leurs manuels et documentations. Il peut s'agir de tout ou partie des paramètres figurant dans ce document de définition. Cette première édition de l'IEC 62885-9 annule et remplace l'IEC 62826 publiée en 2014. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente: a) référence à une version datée de l'IEC 60335-2-72 afin d'assurer la cohérence entre les deux Normes; b) un nouveau calcul de la consommation de courant nominal en 22.1; c) un nouveau calcul du temps de fonctionnement maximal net en 22.2; d) mise à jour de la Bibliographie.

Naprave za površinsko čiščenje - 9. del: Stroji za nego tal s pogonom ali brez njega za komercialno uporabo - Metode za merjenje lastnost

Standard EN-IEC 62885-9 navaja parametre značilnih lastnosti strojev za pranje in pometanje tal ter drugih strojev za čiščenje tal, za katerimi se hodi ali se vozi na njih, v skladu s standardom IEC 60335-2-72:2016. Njegov namen je pomoč proizvajalcem pri opisovanju parametrov, ki jih navajajo v svojih priročnikih in literaturi. Navajajo lahko vse ali samo nekatere parametre, navedene v tem dokumentu z definicijami.

General Information

Status
Published
Publication Date
05-Dec-2019
Withdrawal Date
17-Nov-2022
Current Stage
6060 - Document made available - Publishing
Start Date
06-Dec-2019
Completion Date
06-Dec-2019

Relations

Buy Standard

Standard
EN IEC 62885-9:2020
English language
27 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-februar-2020
Nadomešča:
SIST EN 62826:2014
Naprave za površinsko čiščenje - 9. del: Stroji za nego tal s pogonom ali brez
njega za komercialno uporabo - Metode za merjenje lastnost
Surface cleaning appliances - Part 9: Floor treatment machines with or without traction
drive, for commercial use - Methods of measuring the performance
Appareils de nettoyage de surface - Partie 9: Machines de traitements des sols avec ou
sans commande de dispositif de déplacement, à usage commercial - Méthodes de
mesure des performances
Ta slovenski standard je istoveten z: EN IEC 62885-9:2019
ICS:
97.080 Aparati za čiščenje Cleaning appliances
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62885-9

NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2019
ICS 97.080 Supersedes l'EN 62826:2014 and all of its amendments
and corrigenda (if any)
English Version
Surface cleaning appliances - Part 9: Floor treatment machines
with or without traction drive, for commercial use - Methods for
measuring the performance
(IEC 62885-9:2019)
Appareils de nettoyage des sols - Partie 9: Machines de Oberflächenreinigungsgeräte - Teil 9:
traitement des sols avec ou sans commande de dispositif Bodenbehandlungsmaschinen mit oder ohne Antrieb für
de déplacement, à usage commercial -Méthodes de den gewerblichen Gebrauch – Prüfverfahren zur
mesure de l'aptitude à la fonction Bestimmung der Gebrauchseigenschaften
(IEC 62885-9:2019) (IEC 62885-9:2019)
This European Standard was approved by CENELEC on 2019-11-18. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62885-9:2019 E

European foreword
The text of document 59F/359/CDV, future edition 1 of IEC 62885-9, prepared by SC 59F "Surface
cleaning appliances" of IEC/TC 59 "Performance of household and similar electrical appliances" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 62885-9:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-08-18
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-11-18
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 62826:2014 and all of its amendments and corrigenda (if any).
Endorsement notice
The text of the International Standard IEC 62885-9:2019 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 62885-8 NOTE Harmonized as EN IEC 62885-8

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60335-1 (mod) 2010 Household and similar electrical EN 60335-1 2012
appliances - Safety - Part 1: General
requirements
- -  + A11 2014
- -  + AC 2014
- -  + A13 2017
+ A1 (mod) 2013  + A1 2019
- -  + A14 2019
IEC 60335-2-69 -  Household and similar electrical - -
appliances - Safety - Part 2-69: Particular
requirements for wet and dry vacuum
cleaners, including power brush, for
commercial use
IEC 60335-2-72 2016 Household and similar electrical EN 60335-2-72 —
appliances – Safety – Part 2-72: Particular
requirements for floor treatment machines
with or without traction drive, for
commercial use
ISO 1585 -  Road vehicles - Engine test code - Net - -
power
Printing and business paper – EN 12281 -
Requirements for copy paper for dry toner
imaging processes
Under preparation. Stage at time of publication: FprEN 60335-2-72:2016.
IEC 62885-9 ®
Edition 1.0 2019-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Surface cleaning appliances –
Part 9: Floor treatment machines with or without traction drive, for commercial

use – Methods for measuring the performance

Appareils de nettoyage des sols –

Partie 9: Machines de traitement des sols avec ou sans commande de dispositif

de déplacement, à usage commercial –Méthodes de mesure de l'aptitude à la

fonction
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 97.080 ISBN 978-2-8322-7419-4

– 2 – IEC 62885-9:2019 © IEC 2019
CONTENTS
FOREWORD . 5
1 Scope . 7
2 Normative references . 7
3 Terms, definitions and abbreviated terms . 7
3.1 Terms and definitions . 7
3.2 Abbreviated terms . 8
4 General conditions for testing . 8
4.1 Atmospheric conditions . 8
4.2 Machine loading . 8
4.3 Machine set-up . 8
5 Working path width . 9
5.1 Working scrubbing path width . 9
5.2 Total pad/brush width . 9
5.3 Maximum squeegee width . 9
5.4 Minimum working sweeping path width . 9
5.5 Maximum working sweeping path width . 9
5.6 Measurement method . 9
5.7 Reporting . 9
6 Minimum aisle turn-around width . 9
6.1 General . 9
6.2 Measurement method . 10
6.3 Reporting . 10
7 Machine transport width . 10
7.1 General . 10
7.2 Measurement method . 10
7.3 Reporting . 10
8 Weight . 10
8.1 Gross vehicle weight (GVW) taken from IEC 60335-2-72:2016 . 10
8.2 Empty weight . 10
8.3 Transportation weight . 11
8.4 Reporting . 11
9 Maximum scrub deck down force . 11
9.1 General . 11
9.2 Measurement method . 11
9.3 Reporting . 11
10 Maximum scrub deck down pressure . 12
10.1 General . 12
10.2 Determination method . 12
10.3 Reporting . 12
11 Rotational speed of pads, brushes and brooms . 12
11.1 General . 12
11.2 Measurement method – unloaded operation . 12
11.3 Measurement method – loaded operation . 12
11.4 Reporting . 13
12 Maximum floor load and wheel contact pressure . 13
12.1 General . 13

IEC 62885-9:2019 © IEC 2019 – 3 –
12.2 Measurement method . 13
12.3 Reporting . 13
13 Speed . 13
13.1 Maximum transport mode speed (power-driven machines) . 13
13.2 Maximum working mode speed . 13
13.3 Measurement method . 13
13.4 Reporting . 13
14 Sound . 13
14.1 Sound power level . 13
14.2 Sound pressure Level . 14
14.3 Measurement method . 14
14.4 Reporting .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.