EN 45556:2019
(Main)General method for assessing the proportion of reused components in energy-related products
General method for assessing the proportion of reused components in energy-related products
This document deals with the assessment of the proportion of re-used components in energy-related products on a generic level. All energy-related products are in the scope of this standard.
Allgemeines Verfahren zur Bewertung des Anteils an wiederverwendeten Komponenten in energieverbrauchsrelevanten Produkten
Méthode générale d'évaluation de la proportion de composants réutilisés dans les produits liés à l'énergie
Splošna metoda za ocenjevanje deleža ponovno uporabljenih komponent v izdelkih, povezanih z energijo
Ta dokument obravnava ocenjevanje deleža ponovno uporabljenih komponent v izdelkih, povezanih z energijo, na splošni ravni. Na področje uporabe tega standarda spadajo vsi izdelki, povezani z energijo.
General Information
- Status
- Published
- Publication Date
- 06-Jun-2019
- Withdrawal Date
- 14-Apr-2022
- Current Stage
- 6060 - Document made available - Publishing
- Start Date
- 07-Jun-2019
- Due Date
- 12-Nov-2020
- Completion Date
- 07-Jun-2019
Overview
EN 45556:2019 (CLC) provides a general, product-agnostic method to assess the proportion of reused components in energy-related products. Intended primarily for product technical committees and manufacturers, the standard establishes common principles for calculating and documenting reused-component content at product level or over a defined production period. The standard supports material-efficiency objectives under ecodesign frameworks by promoting traceability and consistent reporting of reuse metrics.
Key Topics
- Scope and purpose: Applies generically to all energy-related products; focused on assessing the share of components that have been used before and are incorporated again.
- Calculation approaches: Four accepted calculation approaches are described:
- Proportion by mass on a product level
- Proportion by number on a product level
- Proportion by mass balance over a defined period (mass per unit × units)
- Proportion by number balance over a defined period (components per unit × units)
- Verification and traceability: As direct measurement is not feasible, verification relies on documented evidence from manufacturers, suppliers or authorized distributors. Traceability and identification of reused components are essential to account for reused items.
- Documentation requirements: The assessment must be documented with scope, input data, assumptions, calculation method, accounted period (≤ 1 year), and outputs. Sensitive information should be classified per the guidance in EN 45559.
- Key inputs: Examples of required inputs include masses or counts of reused components, total product mass or component count, number of units in the accounting period, and mass or component count per unit.
Applications
EN 45556:2019 is practical for:
- Product technical committees developing product-specific or product-group standards that include material-efficiency requirements.
- Manufacturers establishing internal reporting or compliance evidence for ecodesign and sustainability programs.
- Organizations tracking progress on circular-economy targets by quantifying reuse rates across production batches or product lines.
Benefits include:
- Consistent calculation of reuse across products and product groups
- Improved supply-chain transparency through required traceability
- Better comparability of reuse metrics for reporting and policy implementation
Related Standards
- EN 45559:2019 - Methods for providing information relating to material efficiency aspects of energy-related products (referenced for reporting and sensitivity classification)
- CLC/TR 45550 (definitions related to material efficiency)
Practical note: Product committees should select the most suitable calculation approach for their product-group, document assumptions, and ensure the accounted period is representative of production volumes.
Frequently Asked Questions
EN 45556:2019 is a standard published by CLC. Its full title is "General method for assessing the proportion of reused components in energy-related products". This standard covers: This document deals with the assessment of the proportion of re-used components in energy-related products on a generic level. All energy-related products are in the scope of this standard.
This document deals with the assessment of the proportion of re-used components in energy-related products on a generic level. All energy-related products are in the scope of this standard.
EN 45556:2019 is classified under the following ICS (International Classification for Standards) categories: 13.020.20 - Environmental economics. Sustainability; 13.030.50 - Recycling; 29.020 - Electrical engineering in general; 31.020 - Electronic components in general. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 45556:2019 is associated with the following European legislation: EU Directives/Regulations: 2009/125/EC; Standardization Mandates: M/543. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 45556:2019 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CLC standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2019
Splošna metoda za ocenjevanje deleža ponovno uporabljenih komponent v
izdelkih, povezanih z energijo
General method for assessing the proportion of reused components in energy-related
products
Allgemeines Verfahren zur Bewertung des Anteils an wiederverwendeten Komponenten
in einem energieverbrauchsrelevanten Produkt
Méthode générale d'évaluation de la proportion de composants 2 réutilisés dans les
produits liés à l'énergie
Ta slovenski standard je istoveten z: EN 45556:2019
ICS:
13.030.50 Recikliranje Recycling
29.020 Elektrotehnika na splošno Electrical engineering in
general
31.020 Elektronske komponente na Electronic components in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 45556
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2019
ICS 13.030.50; 29.020; 31.020
English Version
General method for assessing the proportion of reused
components in energy-related products
Méthode générale d'évaluation de la proportion de Allgemeines Verfahren zur Bewertung des Anteils an
composants réutilisés dans les produits liés à l'énergie wiederverwendeten Komponenten in
energieverbrauchsrelevanten Produkten
This European Standard was approved by CENELEC on 15 April 2019. CEN and CENELEC members are bound to comply with the
CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard
without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CEN and CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC Management Centre
has the same status as the official versions.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia,
Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 All rights of exploitation in any form and by any means reserved worldwide for CEN national Members and for
CEN/CENELEC CENELEC Members.
Ref. No. EN 45556:2019 E
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Assessment method for the proportion of reused components in an energy-related
product . 5
4.1 General considerations . 5
4.2 Calculation of the proportion of reused components . 6
4.2.1 Proportion of reused components by mass on product level . 6
4.2.2 Proportion of reused components by number on product level . 6
4.2.3 Proportion of reused components by mass balance . 7
4.2.4 Proportion of reused components by number balance . 7
5 Documenting the assessment of the proportion of reused components . 7
5.1 General . 7
5.2 Elements of the assessment . 8
Bibliography . 10
European foreword
This document (EN 45556:2019) has been prepared by CEN/CLC/JTC 10 “Energy-related products - Material
Efficiency Aspects for Ecodesign”.
The following dates are fixed:
• latest date by which this document has to be (dop) 2020-04-15
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) 2022-04-15
conflicting with this document have to be
withdrawn
This document has been prepared under a mandate given to CENELEC by the European Commission and the
European Free Trade Association.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
The dual logo CEN-CENELEC standardization deliverables, in the numerical range of 45550 – 45559, have
been developed under standardization request M/543 of the European Commission and are intended to
potentially apply to any product within the scope of the energy-related products (ErP) Directive (2009/125/EC).
Topics covered in the above standardization request are linked to the following material efficiency aspects:
a) Extending product lifetime.
b) Ability to reuse components or recycle materials from products at end-of-life.
c) Use of reused components and/or recycled materials in products.
These standards are general in nature and describe or define fundamental principles, concepts, terminology or
technical characteristics. They can be cited together with other product-specific or product-group standards,
e.g. developed by product technical committees.
This document is intended to be used by product technical committees when producing product-specific or
product-group standards.
Introduction
This document provides general methods for assessing the proportion of reused components in an energy-
related product. Four calculation methods based on mass of re-used components and the number of reused
components are presented. Other methods may exist and be more suitable for certain products or product-
groups. While writing product standards on assessing the proportion of reused components product technical
committees should apply the most suitable methods for their product-group.
1 Scope
This document deals with the assessment of the proportion of reused components in energy-related products
on a generic level, which can be applied at any point in the life of the product.
This document is intended to be used by product technical committees when producing product, or product-
group, standards.
This document can be applied where no product-specific standard exists.
Aspects like performance, validation, verification and suitability of reused components are not in the scope of
this document.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references, the
latest edition of the referenced document (including any amendments) applies.
EN 45559:2019, Methods for providing information relating to material efficiency aspects of ene
...
SIST EN 45556:2019 표준은 에너지 관련 제품에서 재사용된 구성 요소의 비율을 평가하는 일반 방법에 대한 문서로, 그 범위는 넓고 포괄적입니다. 이 표준은 모든 에너지 관련 제품에 적용되며, 재사용 구성 요소 비율의 평가를 위한 체계적 방안을 제공합니다. 이 표준의 강점 중 하나는 다양한 유형의 에너지 관련 제품을 포괄적으로 다룬다는 점입니다. 이는 제조업체들이 재사용 구성 요소를 평가하고, 지역 및 국제적으로 일관된 기준에 따라 제품의 지속 가능성을 높이는 데 기여합니다. 또한, EN 45556:2019은 환경 보호와 자원 효율성을 증대시키는 데 기여할 수 있는 방법론을 제공합니다. 재사용 구성 요소의 비율을 정확히 평가함으로써 기업은 제품의 환경적 영향을 최소화하고, 에너지 효율성을 극대화할 수 있습니다. 이러한 점에서 SIST EN 45556:2019 표준은 환경 지속 가능성과 관련된 요구를 충족시키는 데 있어 필수적인 기준으로 평가됩니다. 이를 통해 기업들은 사회적 책임을 다하고, 고객들에게 더욱 신뢰할 수 있는 제품을 제공할 수 있습니다. 따라서, SIST EN 45556:2019 표준은 에너지 관련 제품의 지속 가능성과 환경적 영향을 평가하는 데 있어 매우 관련성 높은 도구로 자리 잡고 있습니다. 이는 재사용 구성 요소의 효율적인 활용을 통해 대체 자원의 사용을 줄이고, 전반적인 에너지 소비를 감소시키는 데 도움을 줄 것입니다.
La norme SIST EN 45556:2019 fournit une méthode générale pour évaluer la proportion de composants réutilisés dans les produits liés à l'énergie. Son étendue englobe tous les produits énergétiques, ce qui en fait un document essentiel pour l'analyse de la durabilité et de l'économie circulaire. L'une des forces majeures de cette norme réside dans sa capacité à offrir un cadre standardisé qui facilite l'évaluation transparente et cohérente des composants réutilisés. En établissant des critères clairs, elle permet aux fabricants de mesurer l'impact environnemental de leurs produits, favorisant ainsi des pratiques plus durables dans le secteur énergétique. De plus, cette norme soutient les initiatives visant à réduire les déchets et à encourager la réutilisation des ressources, ce qui est particulièrement pertinent dans le contexte actuel de sensibilisation à l'écologie. La pertinence de la norme SIST EN 45556:2019 ne peut être sous-estimée. Dans un monde où les questions environnementales sont au premier plan, elle offre une voie pragmatique pour les entreprises souhaitant améliorer la traçabilité et la durabilité de leurs produits. L'évaluation de la proportion de composants réutilisés devient ainsi un indicateur clé non seulement pour la conformité réglementaire, mais aussi pour la satisfaction des consommateurs, de plus en plus soucieux de l'impact écologique des produits qu'ils choisissent. En résumé, la norme SIST EN 45556:2019 constitue un outil précieux pour les acteurs de l'industrie énergétique, leur permettant d'innover tout en respectant des standards écologiques rigoureux. Sa capacité à intégrer les notions de durabilité dans l'évaluation des produits énergétiques en fait un élément central du développement futur dans ce domaine.
The EN 45556:2019 standard provides a comprehensive framework for assessing the proportion of reused components specifically within energy-related products. Its broad scope ensures that it encompasses a wide array of products, from household appliances to industrial machinery, making it a crucial tool for manufacturers aiming to enhance their sustainability practices. One of the primary strengths of EN 45556:2019 lies in its methodical approach to evaluation. The standard outlines a general method that can be applied uniformly across various types of energy-related products, promoting consistency and reliability in reporting the use of reused components. This consistency is vital for stakeholders, including manufacturers, consumers, and regulatory bodies, as it aids in fostering transparency within the product lifecycle. Moreover, the relevance of EN 45556:2019 cannot be understated in today's context where environmental impacts and resource conservation are of paramount importance. By facilitating the assessment of reuse, the standard not only encourages energy-related products to incorporate more sustainable practices but also aligns with global initiatives aimed at reducing waste and promoting circular economy principles. Overall, the EN 45556:2019 standard stands out for its clarity, applicability, and relevance in promoting sustainability within the energy sector. The standardized assessment of reused components it offers is valuable for advancing responsible innovation in energy-related products.
Die Norm EN 45556:2019 stellt eine umfassende methodische Grundlage für die Bewertung des Anteils von wiederverwendeten Komponenten in energiebezogenen Produkten dar. Mit ihrem breiten Anwendungsspektrum erfasst die Norm alle energiefokussierten Produkte und ermöglicht somit eine einheitliche und transparente Bewertung, die für Hersteller und Verbraucher gleichermaßen von Bedeutung ist. Ein zentrales Stärke dieser Norm ist ihre generische Herangehensweise, die eine Vielzahl von Produkten abdeckt und zur Förderung der Kreislaufwirtschaft beiträgt. Durch die Definition und Standardisierung der Bewertungsmethoden schafft die EN 45556:2019 klare Richtlinien, die den Unternehmen helfen, den Anteil von wiederverwendeten Materialien transparent darzustellen. Dies bietet nicht nur Vorteile beim Produktdesign und der Ressourcennutzung, sondern unterstützt auch die nachhaltigen Ziele der Hersteller und die Erwartungen der Verbraucher. Ein weiterer bedeutender Aspekt ist die Relevanz der Norm im Kontext globaler Umweltstandards. Die zunehmende Bedeutung von Nachhaltigkeit und Ressourcenschonung in der Energiebranche unterstreicht die Notwendigkeit für etablierte Bewertungsstandards wie die EN 45556:2019. Diese Norm trägt nicht nur zur Erhöhung der Markttransparenz bei, sondern motiviert auch zur Innovation in der Produktentwicklung, indem sie Unternehmen dazu anregt, mehr wiederverwendete Komponenten einzusetzen. Zusammenfassend lässt sich festhalten, dass die EN 45556:2019 eine essentielle Ressource für die Bewertung des Anteils von wiederverwendeten Komponenten in energiebezogenen Produkten darstellt. Ihre umfassende Methodik, die breite Anwendbarkeit sowie ihre entscheidende Rolle in der Förderung nachhaltiger Praktiken machen sie zu einem unverzichtbaren Standard in der Branche.
SIST EN 45556:2019は、エネルギー関連製品における再利用部品の比率を評価するための一般的な手法を提供する文書です。この標準は、すべてのエネルギー関連製品を対象としており、品質や効率を向上させるための重要な指針となります。 この標準の強みは、その汎用性にあります。様々なエネルギー関連製品に適用できるため、製品ライフサイクルのさまざまな段階で再利用部品の評価が可能です。また、環境保護の観点からも、再利用部品の使用を推進するための明確な指針を提供しており、サステナビリティの重要性が高まる中で非常に重要な役割を果たします。 さらに、SIST EN 45556:2019は、製品の市場競争力を向上させる要素ともなりうる。再利用部品の比率を正確に評価することによって、企業はより効率的な生産方式を導入し、エネルギーの節約やコスト削減を実現することができます。このように、標準は単に評価手法を提供するだけでなく、企業の戦略的な意思決定にも大きく寄与します。 全体として、SIST EN 45556:2019は、エネルギー関連製品における再利用部品の評価に関する包括的で強力な基準を設定しており、ユーザーにとって非常に有用であると言えます。
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...