EN 61185:2005
(Main)Ferrite cores (ETD-cores) intended for use in power supply applications - Dimensions
Ferrite cores (ETD-cores) intended for use in power supply applications - Dimensions
Specifies the dimensions that are of importance for mechanical interchangeability for ETD-cores made of ferrite, the essential dimensions of coil formers to be used with them, and the effective parameter values to be used in calculations involving them.
Ferritkerne (ETD-Kerne) für die Stromversorgung - Maße
Noyaux ferrites (noyaux ETD) destinés à être utilisés dans les alimentations - Dimensions
Specifies the dimensions that are of importance for mechanical interchangeability for ETD-cores made of ferrite, the essential dimensions of coil formers to be used with them, and the effective parameter values to be used in calculations involving them.
Feritna jedra (ETD-jedra) za uporabo v napajalnikih – Mere (IEC 61185:2005)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 61185:2005
STANDARD
december 2005
Feritna jedra (ETD-jedra) za uporabo v napajalnikih – Mere (IEC 61185:2005)
Ferrite cores (ETD-cores) intended for use in power supply applications –
Dimensions (IEC 61185:2005)
ICS 29.100.10 Referenčna številka
SIST EN 61185:2005(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 61185
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2005
ICS 29.100.10 Supersedes EN 61185:1997
English version
Ferrite cores (ETD-cores) intended for use
in power supply applications –
Dimensions
(IEC 61185:2005)
Noyaux ferrites (noyaux ETD) Ferritkerne (ETD-Kerne)
destinés à être utilisés für die Stromversorgung –
dans les alimentations – Maße
Dimensions (IEC 61185:2005)
(CEI 61185:2005)
This European Standard was approved by CENELEC on 2005-06-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61185:2005 E
---------------------- Page: 2 ----------------------
EN 61185:2005 - 2 -
Foreword
The text of document 51/818/FDIS, future edition 2 of IEC 61185, prepared by IEC TC 51, Magnetic
components and ferrite materials, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 61185 on 2005-06-01.
This European Standard supersedes EN 61185:1997.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-03-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-06-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61185:2005 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 3 ----------------------
- 3 - EN 61185:2005
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60205 2001 Calculation of the effective parameters of EN 60205 2001
magnetic piece parts
---------------------- Page: 4 ----------------------
INTERNATIONAL IEC
STANDARD 61185
Second edition
2005-06
Ferrite cores (ETD-cores) intended for use
in power supply applications –
Dimensions
IEC 2005 Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale N
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue
---------------------- Page: 5 ----------------------
– 2 – 61185 IEC:2005(E)
CONTENTS
FOREWORD.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.