Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration sites and reference test sites for 5 MHz to 18 GHz

CISPR 16-1-5:2014 specifies the requirements for calibration sites in the frequency range 5 MHz to 18 GHz used to perform antenna calibrations according to CISPR 16-1-6. It also specifies the requirements for reference test sites that are used for the validation of compliance test sites in the frequency range 30 MHz to 1 000 MHz according to CISPR 16-1-4. It has the status of a basic EMC standard in accordance with IEC Guide 107. Measurement instrumentation specifications are given in CISPR 16-1-1 and CISPR 16-1-4. Further information and background on uncertainties in general is given in CISPR 16-4, which can also be helpful in establishing uncertainty estimates for the calibration processes of antennas and site validation measurements. This second edition cancels and replaces the first edition published in 2003, and its Amendment 1 (2012). It constitutes a technical revision which includes the following significant technical changes with respect to the previous edition: - site validation methods for other sites covered in CISPR 16-1-6 are added; - smaller step sizes are specified for swept frequency measurements; - the minimum ground plane size is increased; - and other miscellaneous technical and editorial refinements are included.

Anforderungen an Geräte und Einrichtungen sowie Festlegung der Verfahren zur Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Teil 1-5: Geräte und Einrichtungen zur Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Messplätze für die Antennenkalibrierung und Referenz-Messplätze für den Frequenzbereich von 5 MHz bis 18 GHz

Spécification des méthodes et des appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques - Partie 1-5: Appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques - Emplacements d'étalonnage d'antenne et emplacements d'essai de référence pour la plage comprise entre 5 MHz et 18 GHz

Specifikacija za merilne naprave in metode za merjenje radijskih motenj in odpornosti - 1-5. del: Merilne naprave za merjenje radijskih motenj in odpornosti - Preskuševališča za kalibriranje anten in referenčna preskuševališča za 5 Mhz do 18 Mhz

Ta del standarda CISPR 16 določa zahteve za območja za umerjanje v frekvenčnem območju od 5 MHz do 18 GHz za umerjanje antene v skladu s standardom CISPR 16-1-6. Določa tudi zahteve za referenčna preskusna mesta (REFTS), ki se uporabljajo za preverjanje skladnosti preskusnih mest (COMTS) v frekvenčnem območju od 30 MHz do 1000 MHz v skladu s standardom CISPR 16-1-4.
Ima status osnovnega standarda o elektromagnetni združljivosti (EMC) v skladu z vodilom IEC Guide 107 Electromagnetic compatibility – Guide to the drafting of electromagnetic compatibility publications (Elektromagnetna združljivost – Vodilo za pripravo osnutkov publikacij o elektromagnetni združljivosti). Specifikacije za merilne instrumente so podane v standardih CISPR 16-1-1 [1]1 in CISPR 16-1- 4. Dodatne informacije o splošnih negotovostih so podane v standardu CISPR 16-4 [3], kar je lahko koristno pri ugotavljanju ocen negotovosti pri postopkih umerjanja anten in meritvah preverjanja mest.

General Information

Status
Published
Publication Date
05-Feb-2015
Withdrawal Date
20-Jan-2018
Current Stage
6060 - Document made available - Publishing
Start Date
06-Feb-2015
Completion Date
06-Feb-2015

Relations

Buy Standard

Standard
EN 55016-1-5:2015 - BARVE
English language
96 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 55016-1-5:2015
01-april-2015
1DGRPHãþD
SIST EN 55016-1-5:2005
SIST EN 55016-1-5:2005/A1:2013
6SHFLILNDFLMD]DPHULOQHQDSUDYHLQPHWRGH]DPHUMHQMHUDGLMVNLKPRWHQMLQ
RGSRUQRVWLGHO0HULOQHQDSUDYH]DPHUMHQMHUDGLMVNLKPRWHQMLQRGSRUQRVWL
3UHVNXãHYDOLãþD]DNDOLEULUDQMHDQWHQLQUHIHUHQþQDSUHVNXãHYDOLãþD]D0K]GR
0K]
Specification for radio disturbance and immunity measuring apparatus and methods -
Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration
sites and reference test sites for 5 MHz to 18 GHz
Anforderungen an Geräte und Einrichtungen sowie Festlegung der Verfahren zur
Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Teil
1-5: Geräte und Einrichtungen zur Messung der hochfrequenten Störaussendung
(Funkstörungen) und Störfestigkeit - Messplätze für die Antennenkalibrierung und
Referenz-Messplätze für den Frequenzbereich von 5 MHz bis 18 GHz
Ta slovenski standard je istoveten z: EN 55016-1-5:2015
ICS:
17.220.20 0HUMHQMHHOHNWULþQLKLQ Measurement of electrical
PDJQHWQLKYHOLþLQ and magnetic quantities
33.100.20 Imunost Immunity
SIST EN 55016-1-5:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 55016-1-5:2015

---------------------- Page: 2 ----------------------

SIST EN 55016-1-5:2015


EUROPEAN STANDARD EN 55016-1-5

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2015
ICS 33.100.10; 33.100.20 Supersedes EN 55016-1-5:2004
English Version
Specification for radio disturbance and immunity measuring
apparatus and methods -
Part 1-5: Radio disturbance and immunity measuring apparatus -
Antenna calibration sites and reference
test sites for 5 MHz to 18 GHz
(CISPR 16-1-5:2014)
Spécification des méthodes et des appareils de mesure des Anforderungen an Geräte und Einrichtungen sowie
perturbations radioélectriques et de l'immunité aux Festlegung der Verfahren zur Messung der hochfrequenten
perturbations radioélectriques - Störaussendung (Funkstörungen) und Störfestigkeit -
Partie 1-5: Appareils de mesure des perturbations Teil 1-5: Geräte und Einrichtungen zur Messung der
radioélectriques et de l'immunité aux perturbations hochfrequenten Störaussendung (Funkstörungen) und
radioélectriques - Emplacements d'étalonnage d'antenne et Störfestigkeit - Messplätze für die Antennenkalibrierung und
emplacements d'essai de référence pour la plage comprise Referenz-Messplätze für den Frequenzbereich
entre 5 MHz et 18 GHz von 5 MHz bis 18 GHz
(CISPR 16-1-5:2014) (CISPR 16-1-5:2014)
This European Standard was approved by CENELEC on 2015-01-21. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 55016-1-5:2015 E

---------------------- Page: 3 ----------------------

SIST EN 55016-1-5:2015
EN 55016-1-5:2015 - 2 -
Foreword
The text of document CISPR/A/1086A/FDIS, future edition 2 of CISPR 16-1-5, prepared by
CISPR SC A “Radio-interference measurements and statistical methods" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 55016-1-5:2015.

The following dates are fixed:
(dop) 2015-10-21
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2018-01-21
standards conflicting with the
document have to be withdrawn

This document supersedes EN 55016-1-5:2004.

Attention is
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.