EN IEC 62680-1-2:2022
(Main)Universal serial bus interfaces for data and power - Part 1-2: Common components - USB Power Delivery specification
Universal serial bus interfaces for data and power - Part 1-2: Common components - USB Power Delivery specification
IEC 62680-1-2:2022 specification defines a power delivery system covering all elements of a USB system including: Hosts, Devices, Hubs, Chargers and cable assemblies. This specification describes the architecture, protocols, power supply behavior, connectors and cabling necessary for managing power delivery over USB at up to 100W. This specification is intended to be fully compatible and extend the existing USB infrastructure. It is intended that this specification will allow system OEMs, power supply and peripheral developers adequate flexibility for product versatility and market differentiation without losing backwards compatibility. This sixt edition cancels and replaces the fifth edition published in 2021 and constitutes a technical revision. Extended Power Range (EPR) including Adjustable Voltage Supply (AVS) has been added. This docuemnt is the USB-IF publication Universal Serial Bus Power Delivery Specification Revision 3.1, Version 1.1.
Schnittstellen des Universellen Seriellen Busses für Daten und Energie - Teil 1-2: Gemeinsame Komponenten - Festlegung für die USB-Stromversorgung
Interfaces de bus universel en série pour les données et l'alimentation électrique - Partie 1-2: Composants communs - Spécification de l'alimentation électrique par port USB
L'IEC 62680-1-2:2022 spécification de l'alimentation électrique par port USB définit un système d'alimentation électrique qui couvre tous les éléments d'un système USB, y compris: hôtes, dispositifs, hubs, chargeurs et assemblages de câbles. La présente spécification décrit l'architecture, les protocoles, le comportement de l'alimentation électrique, les connecteurs et le câblage nécessaires à la gestion de l'alimentation électrique sur USB jusqu'à 100 W. La présente spécification est destinée à être entièrement compatible avec les infrastructures USB existantes et à en assurer une extension. Il est prévu que cette spécification offre aux OEM de systèmes, ainsi qu'aux développeurs d'alimentations électriques et de périphériques, une souplesse appropriée pour une polyvalence des produits et leur différenciation sur le marché, sans perdre en compatibilité ascendante. Cette sixième édition annule et remplace la cinquième édition parue en 2021 et constitue une révision technique. Le présent document est la publication de l'USB-IF relative à l'alimentation électrique par port USB, révision 3.1, version 1.1. Plage de puissance étendue (EPR) y compris alimentation à tension réglable (AVS) a été ajoutée.
Vmesniki univerzalnega serijskega vodila za prenos podatkov in napajanje - 1-2. del: Skupne komponente - Specifikacija za zagotavljanje napajanja prek USB (IEC 62680-1-2:2022)
Specifikacija IEC 62680-1-2:2022 opredeljuje sistem napajanja, ki zajema vse elemente sistema USB, vključno z: gostitelji, napravami, vozlišči, polnilniki in sklopi kablov. Ta specifikacija opisuje arhitekturo, protokole, delovanje napajalnika, konektorje in kable, ki so potrebni za upravljanje napajanja prek USB do 100 W. Njen namen je popolna združljivost z obstoječo infrastrukturo USB ter njena razširitev. Predvideva se, da bo ta specifikacija proizvajalcem originalne opreme, napajalnikov in perifernih naprav omogočila ustrezno prilagodljivost za vsestransko ponudbo izdelkov in razlikovanje na trgu brez izgube združljivosti za nazaj. Ta šesta izdaja razveljavlja in nadomešča peto izdajo, objavljeno leta 2021, in predstavlja tehnično popravljeno izdajo. Dodana je bila tehnologija EPR (Extended Power Range) vključno z AVS (Adjustable Voltage Supply). Dokument je publikacija USB-IF Specifikacija za napajanje univerzalnega serijskega vodila, revizija 3.1, različica 1.1.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2023
Nadomešča:
SIST EN IEC 62680-1-2:2021
Vmesniki univerzalnega serijskega vodila za prenos podatkov in napajanje - 1-2.
del: Skupne komponente - Specifikacija za zagotavljanje napajanja prek USB (IEC
62680-1-2:2022)
Universal serial bus interfaces for data and power - Part 1-2: Common components -
USB Power Delivery specification (IEC 62680-1-2:2022)
Schnittstellen des Universellen Seriellen Busses für Daten und Energie - Teil 1-2:
Gemeinsame Komponenten - Festlegung für die USB-Stromversorgung (IEC 62680-1-
2:2022)
Interfaces de bus universel en série pour les données et l'alimentation électrique - Partie
1-2: Composants communs - Spécification de l'alimentation électrique par port USB (IEC
62680-1-2:2022)
Ta slovenski standard je istoveten z: EN IEC 62680-1-2:2022
ICS:
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 62680-1-2
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2022
ICS 29.220; 33.120; 35.200 Supersedes EN IEC 62680-1-2:2021
English Version
Universal serial bus interfaces for data and power - Part 1-2:
Common components - USB Power Delivery specification
(IEC 62680-1-2:2022)
Interfaces de bus universel en série pour les données et Schnittstellen des Universellen Seriellen Busses für Daten
l'alimentation électrique - Partie 1-2: Composants communs und Energie - Teil 1-2: Gemeinsame Komponenten -
- Spécification de l'alimentation électrique par port USB Festlegung für die USB-Stromversorgung
(IEC 62680-1-2:2022) (IEC 62680-1-2:2022)
This European Standard was approved by CENELEC on 2022-10-10. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62680-1-2:2022 E
European foreword
The text of document 100/3716/CDV, future edition 6 of IEC 62680-1-2, prepared by IEC/TC 100
"Audio, video and multimedia systems and equipment" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN IEC 62680-1-2:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-07-10
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-10-10
document have to be withdrawn
This document supersedes EN IEC 62680-1-2:2021 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62680-1-2:2022 was approved by CENELEC as a
European Standard without any modification.
IEC 62680-1-2 ®
Edition 6.0 2022-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Universal serial bus interfaces for data and power –
Part 1-2: Common components – USB Power Delivery specification
Interfaces de bus universel en série pour les données et l'alimentation
électrique –
Partie 1-2: Composants communs – Spécification de l'alimentation électrique
par port USB
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.220; 33.120; 35.200 ISBN 978-2-8322-5288-8
– 2 – IEC 62680-1-2:2022
© USB-IF:2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
UNIVERSAL SERIAL BUS INTERFACES FOR DATA AND POWER –
Part 1-2: Common components – USB Power Delivery specification
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62680-1-2 has been prepared by technical area 18: Multimedia
home systems and applications for end-user networks, of IEC technical committee 100: Audio,
video and multimedia systems and equipment.
The text of this standard was prepared by the USB Implementers Forum (USB-IF). The structure
and editorial rules used in this publication reflect the practice of the organization which
submitted it.
The text of this International Standard is based on the following documents:
Draft Report on voting
100/3716/CDV 100/3763/RVC
Full information on the voting for the approval of this International Standard can be found in the
report on voting indicated in the above table.
IEC 62680-1-2:2022 – 3 –
© USB-IF:2021
A list of all parts in the IEC 62680 series, published under the general title Universal serial bus
interfaces for data and power, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The "colour inside" logo on the cover page of this document indicates that it
contains colours which are considered to be useful for the correct understanding of its
contents. Users should therefore print this document using a colour printer.
– 4 – IEC 62680-1-2:2022
© USB-IF:2021
INTRODUCTION
The IEC 62680 series is based on a series of specifications that were originally developed by the USB
Implementers Forum (USB-IF). These specifications were submitted to the IEC under the auspices of
a special agreement between the IEC and the USB-IF.
This standard is the USB-IF publication Universal Serial Bus Power Delivery Specification Revision
3.1, Version 1.1.
The USB Implementers Forum, Inc.(USB-IF) is a non-profit corporation founded by the group of
companies that developed the Universal Serial Bus specification. The USB-IF was formed to provide a
support organization and forum for the advancement and adoption of Universal Serial Bus technology.
The Forum facilitates the development of high-quality compatible USB peripherals (devices), and
promotes the benefits of USB and the quality of products that have passed compliance testing.
ANY USB SPECIFICATIONS ARE PROVIDED TO YOU "AS IS, "WITH NO WARRANTIES
WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NON-INFRINGEMENT,
OR FITNESS FOR ANY PARTICULAR PURPOSE. THE USB IMPLEMENTERS FORUM AND THE
AUTHORS OF ANY USB SPECIFICATIONS DISCLAIM ALL LIABILITY, INCLUDING LIABILITY
FOR INFRINGEMENT OF ANY PROPRIETARY RIGHTS, RELATING TO USE OR
IMPLEMENTATION OR INFORMATION IN THIS SPECIFICAITON.
THE PROVISION OF ANY USB SPECIFICATIONS TO YOU DOES NOT PROVIDE YOU WITH ANY
LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL
PROPERTY RIGHTS.
Entering into USB Adopters Agreements may, however, allow a signing company to participate in a
reciprocal, RAND-Z licensing arrangement for compliant products. For more information, please see:
https://www.usb.org/documents
IEC DOES NOT TAKE ANY POSITION AS TO WHETHER IT IS ADVISABLE FOR YOU TO ENTER
INTO ANY USB ADOPTERS AGREEMENTS OR TO PARTICIPATE IN THE USB IMPLEMENTERS
FORUM.”
IEC 62680-1-2:2022 – 5 –
© USB-IF:2021
Universal Serial Bus
Power Delivery Specification
Revision: 3.1
Version: 1.1
Release date: July 2021
– 6 – IEC 62680-1-2:2022
© USB-IF:2021
LIMITED COPYRIGHT LICENSE
THE USB 3.0 PROMOTERS GRANT A CONDITIONAL COPYRIGHT LICENSE UNDER THE COPYRIGHTS
EMBODIED IN THE USB POWER DELIVERY SPECIFICATION TO USE AND REPRODUCE THE
SPECIFICATION FOR THE SOLE PURPOSE OF, AND SOLELY TO THE EXTENT NECESSARY FOR,
EVALUATING WHETHER TO IMPLEMENT THE SPECIFICATION IN PRODUCTS THAT WOULD COMPLY
WITH THE SPECIFICATION. WITHOUT LIMITING THE FOREGOING, USE THE OF SPECIFICATION FOR
THE PURPOSE OF FILING OR MODIFYING ANY PATENT APPLICATION TO TARGET THE SPECIFICATION
OR USB COMPLIANT PRODUCTS IS NOT AUTHORIZED. EXCEPT FOR THIS EXPRESS COPYRIGHT LICENSE,
NO OTHER RIGHTS OR LICENSES ARE GRANTED, INCLUDING WITHOUT LIMITATION ANY PATENT
LICENSES. IN ORDER TO OBTAIN ANY ADDITIONALY INTELLECTUAL PROPERTY LICENSES OR
LICENSING COMMITMENTS ASSOCIATED WITH THE SPECIFICATION A PARTY MUST EXECUTE THE USB
3.0 ADOPTERS AGREEMENT. NOTE: BY USING THE SPECIFICATION, YOU ACCEPT THESE LICENSE
TERMS ON YOUR OWN BEHALF AND, IN THE CASE WHERE YOU ARE DOING THIS AS AN EMPLOYEE, ON
BEHALF OF YOUR EMPLOYER.
INTELLECTUAL PROPERTY DISCLAIMER
THIS SPECIFICATION IS PROVIDED TO YOU “AS IS” WITH NO WARRANTIES WHATSOEVER, INCLUDING
ANY WARRANTY OF MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR
PURPOSE. THE AUTHORS OF THIS SPECIFICATION DISCLAIM ALL LIABILITY, INCLUDING LIABILITY FOR
INFRINGEMENT OF ANY PROPRIETARY RIGHTS, RELATING TO USE OR IMPLEMENTATION OF
INFORMATION IN THIS SPECIFICATION. THE PROVISION OF THIS SPECIFICATION TO YOU DOES NOT
PROVIDE YOU WITH ANY LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY
INTELLECTUAL PROPERTY RIGHTS.
Please send comments via electronic mail to techsup@usb.org
For industry information, refer to the USB Implementers Forum web page at http://www.usb.org
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.