EN 62680-2-3:2015
(Main)Universal Serial Bus interfaces for data and power - Part 2-3: Universal Serial Bus Cables and Connectors Class Document, Revision 2.0 (TA 14)
Universal Serial Bus interfaces for data and power - Part 2-3: Universal Serial Bus Cables and Connectors Class Document, Revision 2.0 (TA 14)
IEC 62680-2-3:2015(E) describes the mechanical, electrical, environmental, design and performance criteria and voluntary supplier compliance requirements for USB connectors, cable and fabricated cable assemblies. In addition, this document provides detailed requirements for the design, approval and implementation of application specific USB connectors and fabricated cable assemblies.
Schnittstellen des Universellen Seriellen Busses für Daten und Energie - Teil 2-3: Klasse für Kabel und Steckverbinder des Universellen Seriellen Busses, Überarbeitung 2.0
Interfaces de bus universel en série pour les données et l'alimentation électrique - Partie 2-3 : câbles et connecteurs USB, document de classe, révision 2.0 (TA 14)
L'IEC 62680-2-3:2015 décrit les critères mécaniques, électriques, environnementaux, de conception et de performances, ainsi que les exigences de conformité de fournisseurs volontaires pour les connecteurs, les câbles et les ensembles câbles-connecteurs fabriqués USB. En outre, ce document fournit les exigences précises pour la conception, l'approbation et la mise en œuvre des connecteurs et des ensembles câbles-connecteurs fabriqués USB spécifiques à des applications.
Vmesniki univerzalnega serijskega vodila za prenos podatkov in napajanje - 2-3. del: Razredi za USB-kable in priključke, revizija 2.0 (TA 14) (IEC 62680-2-3:2015)
Ta dokument opisuje mehanska, električna, okoljska merila, merila načrtovanja in učinkovitosti ter zahteve za skladnost prostovoljnega dobavitelja za priključke USB, kable in izdelane kabelske sestave. Poleg tega ta dokument podaja podrobne zahteve za načrtovanje, potrditev in uvajanje priključkov USB, namenjenih določeni uporabi, in izdelanih kabelskih sestavov.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2016
9PHVQLNLXQLYHU]DOQHJDVHULMVNHJDYRGLOD]DSUHQRVSRGDWNRYLQQDSDMDQMH
GHO 5D]UHGL]D86%NDEOHLQSULNOMXþNHUHYL]LMD 7$ ,(&
Universal Serial Bus interfaces for data and power - Part 2-3: Universal Serial Bus
Cables and Connectors Class Document, Revision 2.0 (TA 14) (IEC 62680-2-3:2015)
6FKQLWWVWHOOHQGHV8QLYHUVHOOHQ6HULHOOHQ%XVVHVIU'DWHQXQG(QHUJLH7HLO .ODVVH
IU.DEHOXQG6WHFNYHUELQGHUGHV8QLYHUVHOOHQ6HULHOOHQ%XVVHVhEHUDUEHLWXQJ
,(&
,QWHUIDFHVGHEXVXQLYHUVHOHQVpULHSRXUOHVGRQQpHVHWO
DOLPHQWDWLRQpOHFWULTXH3DUWLH
FkEOHVHWFRQQHFWHXUV86%GRFXPHQWGHFODVVHUpYLVLRQ 7$
,(&
Ta slovenski standard je istoveten z: EN 62680-2-3:2015
ICS:
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 62680-2-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2015
ICS 29.220; 33.120; 35.200
English Version
Universal Serial Bus interfaces for data and power - Part 2-3:
Universal Serial Bus Cables and Connectors Class Document,
Revision 2.0 (TA 14)
(IEC 62680-2-3:2015)
Interfaces de bus universel en série pour les données et Schnittstellen des Universellen Seriellen Busses für Daten
l'alimentation électrique - Partie 2-3 : câbles et connecteurs und Energie - Teil 2-3: Klasse für Kabel und
USB, document de classe, révision 2.0 (TA 14) Steckverbinder des Universellen Seriellen Busses,
(IEC 62680-2-3:2015) Überarbeitung 2.0
(IEC 62680-2-3:2015)
This European Standard was approved by CENELEC on 2015-10-14. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62680-2-3:2015 E
European foreword
The text of document 100/2333/CDV, future edition 1 of IEC 62680-2-3, prepared by Technical Area
14 "Interfaces and methods of measurement for personal computing equipment" of IEC/TC 100
"Audio, video and multimedia systems and equipment" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN 62680-2-3:2015.
The following dates are fixed:
• latest date by which the document has to be (dop) 2016-07-14
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2018-10-14
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62680-2-3:2015 was approved by CENELEC as a
European Standard without any modification.
IEC 62680-2-3 ®
Edition 1.0 2015-09
INTERNATIONAL
STANDARD
colour
inside
Universal serial bus interfaces for data and power –
Part 2-3: Universal Serial Bus Cables and Connectors Class Document
Revision 2.0
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.220; 33.120; 35.200 ISBN 978-2-8322-2847-0
– 2 – IEC 62680-2-3:2015 © IEC 2015
© USB-IF 2014
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
UNIVERSAL SERIAL BUS INTERFACES
FOR DATA AND POWER –
Part 2-3: Universal Serial Bus Cables and
Connectors Class Document Revision 2.0
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62680-2-3 has been prepared by technical area 14: Interfaces and
methods of measurement for personal computing equipment, of IEC technical committee 100:
Audio, video and multimedia systems and equipment.
The text of this standard is based on documents prepared by the USB Implementers Forum
(USB-IF). The structure and editorial rules used in this publication reflect the practice of the
organization which submitted it.
IEC 62680-2-3:2015 © IEC 2015 – 3 –
© USB-IF 2014
The text of this standard is based on the following documents:
CDV Report on voting
100/2333/CDV 100/2436/RVC
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
A list of all the parts in the IEC 62680 series, published under the general title Universal serial
bus interfaces for data and power can be found on the IEC website.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC website under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
– 4 – IEC 62680-2-3:2015 © IEC 2015
© USB-IF 2014
INTRODUCTION
The IEC 62680 series is based on a series of specifications that were originally developed by
the USB Implementers Forum (USB-IF). These specifications were to submitted to the IEC
under the auspices of a special agreement between the IEC and the USB IF.
The USB Implementers Forum, Inc.(USB-IF) is a non-profit corporation founded by the group
of companies that developed the Universal Serial Bus specification. The USB-IF was formed
to provide a support organization and forum for the advancement and adoption of Universal
Serial Bus technology. The Forum facilitates the development of high-quality compatible USB
peripherals (devices), and promotes the benefits of USB and the quality of products that have
passed compliance testing.
ANY USB SPECIFICATIONS ARE PROVIDED TO YOU "AS IS, "WITH NO WARRANTIES
WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NON-
INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE. THE USB
IMPLEMENTERS FORUM AND THE AUTHORS OF ANY USB SPECIFICATIONS DISCLAIM
ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PROPRIETARY
RIGHTS, RELATING TO USE OR IMPLEMENTATION OR INFORMATION IN THIS
SPECIFICAITON.
THE PROVISION OF ANY USB SPECIFICATIONS TO YOU DOES NOT PROVIDE YOU
WITH ANY LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY
INTELLECTUAL PROPERTY RIGHTS.
Entering into USB Adopters Agreements may, however, allow a signing company to
participate in a reciprocal, royalty-free licensing arrangement for compliant products. For more
information, please see:
http://www.usb.org/developers/docs/
http://www.usb.org/developers/devclass_docs#approved
IEC DOES NOT TAKE ANY POSITION AS TO WHETHER IT IS ADVISABLE FOR YOU TO
ENTER INTO ANY USB ADOPTERS AGREEMENTS OR TO PARTICIPATE IN THE USB
IMPLEMENTERS FORUM.”
This series covers the Universal Series Bus interfaces for data and power and consists of the
following parts:
IEC 62680-1-1, Universal Serial Bus interfaces for data and power – Part 1-1: Common
components – USB Battery Charging Specification, Revision 1.2
IEC 62680-2-1, Universal Serial Bus interfaces for data and power – Part 2-1: Universal
Serial Bus Specification, Revision 2.0
IEC 62680-2-2, Universal Serial Bus interfaces for data and power – Part 2-2: USB Micro-
USB Cables and Connectors Specification, Revision 1.01
IEC 62680-2-3, Universal Serial Bus interfaces for data and power – Part 2-3: Universal
Serial Bus Cables and Connectors Class Document Rev. 2.0
This part of the IEC 62680 series consists of several distinct parts:
• the main body of the text, which consists of the original specification developed by the
USB-IF.
IEC 62680-2-3:2015 © IEC 2015 – 5 –
© USB-IF 2014
CONTENTS
FOREWORD . 2
INTRODUCTION . 4
1 Introduction . 11
1.1 Purpose . 11
1.2 Scope . 11
1.3 Related Documents . 11
1.4 Terms and Abbreviations . 12
2 Management Overview . 13
3 USB Electrical, Mechanical and Environmental Compliance Standards . 13
4 Acceptance Criteria, Test Methods and Test Procedures . 17
4.1 Integrators List (IL) . 17
4.2 USB Logo Usage .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.