EN 60255-22-1:2005
(Main)Electrical relays - Part 22-1: Electrical disturbance tests for measuring relays and protection equipment - 1 MHz burst immunity tests
Electrical relays - Part 22-1: Electrical disturbance tests for measuring relays and protection equipment - 1 MHz burst immunity tests
Specifies the general requirements for 1 MHz burst immunity tests for measuring relays and protection equipment for power system protection, including the control, monitoring and process interface equipment used with those systems. Is to be used in conjunction with EN 61000-4-12.
Elektrische Relais - Teil 22-1: Prüfungen der elektrischen Störfestigkeit von Messrelais und Schutzeinrichtungen - Prüfung der Störfestigkeit gegen 1-MHz-Störgrößen
Relais électriques - Partie 22-1: Essais d'influence électrique concernant les relais de mesure et dispositifs de protection - Essais d'immunité à l'onde oscillatoire amortie 1 MHz
Spécifie les exigences générales pour les essais à l'onde oscillatoire amortie à 1 MHz des relais de mesure et des dispositifs de protection des systèmes de protection, en prenant en compte les interfaces avec le processus ainsi que les interfaces de commande et de surveillance utilisés dans ces systèmes. Est à utiliser conjointement avec la EN 61000-4-12.
Električni releji – 22-1. del: Preskusi električnih motenj merilnih relejev in zaščitne opreme – Preskus odpornosti z impulzi 1 MHz (IEC 60255-22-1:2005)
General Information
Relations
Standards Content (Sample)
6,67(16/29(16.,QRYHPEHU67$1'$5'(OHNWULþQLUHOHML±GHO3UHVNXVLHOHNWULþQLKPRWHQMPHULOQLKUHOHMHYLQ]DãþLWQHRSUHPH±3UHVNXVRGSRUQRVWL]LPSXO]L0+],(&(OHFWULFDOUHOD\V3DUW(OHFWULFDOGLVWXUEDQFHWHVWVIRUPHDVXULQJUHOD\VDQGSURWHFWLRQHTXLSPHQW0+]EXUVWLPPXQLW\WHVWV,(& !"#$%&'( )&!*- . 5HIHUHQþQDãWHYLOND6,67(1HQ,&6
EUROPEAN STANDARD
EN 60255-22-1 NORME EUROPÉENNE EUROPÄISCHE NORM
November 2005 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60255-22-1:2005 E
ICS 29.120.70
English version
Electrical relays Part 22-1: Electrical disturbance tests
for measuring relays and protection equipment -
1 MHz burst immunity tests (IEC 60255-22-1:2005)
Relais électriques Partie 22-1: Essais d'influence électrique concernant les relais de mesure et dispositifs de protection -
Essais d'immunité à l'onde oscillatoire amortie 1 MHz (CEI 60255-22-1:2005)
Elektrische Relais Teil 22-1: Prüfungen der elektrischen Störfestigkeit von Messrelais
und Schutzeinrichtungen -
Prüfung der Störfestigkeit
gegen 1-MHz-Störgrößen (IEC 60255-22-1:2005)
This European Standard was approved by CENELEC on 2005-09-13. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
at national level by publication of an identical
national standard or by endorsement
(dop)
2006-07-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2008-10-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 60255-22-1:2005 was approved by CENELEC as a European Standard without any modification. __________
- 3 - EN 60255-22-1:2005
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60255-6 (mod) - 1) Electrical relays Part 6: Measuring relays and protection equipment
EN 60255-6 + corr. February 1994 2)1995 IEC 61000-4-12 1995 Electromagnetic compatibility (EMC) Part 4-12: Testing and measurement techniques - Oscillatory waves immunity test EN 61000-4-12 1995
1) Undated reference.
2) Valid edition at date of issue.
NORME INTERNATIONALECEIIEC INTERNATIONAL STANDARD 60255-22-1Deuxième éditionSecond edition2005-03 Relais électriques – Partie 22-1:
Essais d'influence électrique concernant les
relais de mesure et dispositifs de protection –
Essais d'immunité à l'onde oscillatoire
amortie 1 MHz
Electrical relays – Part 22-1:
Electrical disturbance tests for measuring relays and protection equipment –
1 MHz burst immunity tests
Pour prix, voir catalogue en vigueur For price, see current catalogue IEC 2005
Droits de reproduction réservés
Copyright - all rights reserved Aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l'éditeur. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission,
3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch
Web: www.iec.ch CODE PRIX PRICE CODE N Commission Electrotechnique InternationaleInternational Electrotechnical Commission
60255-22-1 IEC:2005 – 3 –
CONTENTS
FOREWORD.5
1 Scope and object.11 2 Normative references.11 3 Terms and definitions.11 4 Test severity levels.15 5 Test equipment.15 6 Test set-up.23 7 Test procedure.23 8 Criteria for acceptance.25 9 Test report.27
Figure 1 –
Ports for measuring relays and protection equipment.15 Figure 2 – Common mode test between each independent port and earth.17 Figure 3 – Common mode test between each independent port and all other independent ports coupled to earth.19 Figure 4 – Differential mode test.21 Figure 5 – Test set-up for communication ports with shielded cables.25
Table 1 – Test voltages for the EUT ports.15 Table 2 – Criteria for acceptance.27
60255-22-1 IEC:2005 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
ELECTRICAL RELAYS –
Part 22-1: Electrical disturbance tests for measuring relays
and protection equipment –
1 MHz burst immunity tests
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60255-22-1 has been prepared by IEC technical committee 95: Measuring relays and protection equipment. This second edition cancels and replaces the first edition published in 1988. This standard constitutes a technical revision. The main differences with respect to the previous edition concern: – the definition of test severity levels; – the reference to IEC 61000-4-12.
60255-22-1 IEC:2005 – 7 –
The text of this standard is based on the following documents: FDIS Report on voting 95/168/FDIS 95/174/RVD
Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. IEC 60255 consists of the following parts, under the general title Electrical relays: Part 3:
Single input energizing quantity measuring relays with dependent or independent time Part 5:
Insulation coordination for measuring relays and protection equipment – Requirements and tests
Part 6:
Measuring relays and protection equipment Part 8:
Thermal electrical relays Part 11:
Interruptions to and alternating component (ripple) in d.c. auxiliary energizing quantity of measuring relays Part 12:
Directional relays and power relays with two input energizing quantities Part 13:
Biased (percentage) differential relays Part 14:
Endurance tests for electrical relay contacts – Preferred values for contact loads Part 15:
Endurance tests for electrical relay contacts – Specification for the characteristics of test equipment Part 16:
Impedance measuring relays Part 21-1:
Vibration, shock, bump and seismic tests on measuring relays and protection equipment – Vibration tests (sinusoidal) Part 21-2:
Vibration, shock, bump and seismic tests on measuring relays and protection equipment – Shock and bump tests Part 21-3:
Vibration, shock, bump and seismic tests on measuring relays and protection equipment – Seismic tests Part 22-1:
Electrical disturbance tests for measuring relays and protection equipment – 1 MHz burst immunity tests
Part 22-2:
Electrical disturbance tests for measuring relays and protection equipment – Electrostatic discharge tests Part 22-3:
Electrical disturbance tests for measuring relays and protection equipment – Radiated electromagnetic field disturbance tests
Part 22-4:
Electrical disturbance tests for measuring relays and protection equipment – Electrical fast transient/burst immunity test Part 22-5:
Electrical disturbance tests for measuring relays and protection equipment – Surge immunity test Part 22-6:
Electrical disturbance tests for measuring relays and protection equipment – Immunity to conducted disturbances induced by radio frequency fields
60255-22-1 IEC:2005 – 9 –
Part 22-7:
Electrical disturbance tests for measuring relays and protection equipment – Power frequency immunity tests
Part 23:
Contact performance Part 24:
Common format for transient data exchange (COMTRADE) for power systems Part 25:
Electromagnetic emission tests for measuring relays and protection equipment Part 26:
Electromagnetic compatibility requirements for measuring relays and protection equipment Part 27:
Product safety requirements for measuring relays and protection equipment1 The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to the specific publication. At this date, the publication will be
• reconfirmed; • withdrawn; • replaced by a revised edition, or • amended.
___________ 1 Under consideration.
60255-22-1 IEC:2005 – 11 –
ELECTRICAL RELAYS –
Part 22-1: Electrical disturbance tests for measuring relays
and protection equipment –
1 MHz burst immunity tests
1 Scope and object This part of IEC 60255 is based on IEC 61000-4-12, referring to that publication where applicable, and specifies the general requirements for 1 MHz burst immunity tests for measuring relays and protection equipment for power system protection, including the control, monitoring and process interface equipment used with those s
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.