EN 61000-4-25:2002/A1:2012

Electromagnetic compatibility (EMC) - Part 4-25: Testing and measurement techniques - HEMP immunity test methods for equipment and systems

2012-03-14: Publication editing allocated to [e-mail]

Elektromagnetische Verträglichkeit (EMV) - Teil 4-25: Prüf- und Messverfahren - Prüfung der Störfestigkeit von Einrichtungen und Systemen gegen HEMP-Störgrößen

Compatibilité électromagnétique (CEM) - Partie 4-25: Techniques d'essai et de mesure - Méthodes d'essai d'immunité à l'IEMN-HA des appareils et des systèmes

Elektromagnetna združljivost - 4-25. del: Preskuševalne in merilne tehnike - Preskusne metode na odpornost opreme in sistemov proti elektromagnetnim impulzom z velikih višin (HEMP) - Dopolnilo A1 (IEC 61000-4-25:2001/A1:2012)

Opisuje stopnje preskusa odpornosti in povezane preskusne metode za električno in elektronsko opremo ter sisteme, izpostavljene okoljem z elektromagnetnimi impulzi z velikih višin (HEMP). Ta standard določa tudi specifikacije za preskusno opremo in instrumente, postavitev preskusa, preskusne postopke, merila, ali je preskus opravljen ali ne, in zahteve za preskusno dokumentacijo. Ti preskusi so namenjeni za dokazovanje odpornosti električne in elektronske opreme ob izpostavljenosti elektromagnetnim motnjam, ki jih sevajo in prevajajo elektromagnetni impulzi z velikih višin. Namen tega dela standarda IEC 61000 je vzpostavitev skupne in obnovljive podlage za vrednotenje delovanja električne in elektronske opreme, če je izpostavljena okoljem, obsevanim z elektromagnetnimi impulzi z velikih višin in povezanimi prehodnimi vodenimi motnjami elektrike, antene, vhodnega/izhodnega (I/O) signala in tokovnic za krmiljenje.

General Information

• Status: Published
• Publication Date: 03-May-2012
• Withdrawal Date: 11-Apr-2015
• ICS: 33.100.99 - Other aspects related to EMC
• Technical Committee: CLC/TC 210 - Electromagnetic Compatibility (EMC)
• Drafting Committee: IEC/SC 77C - IEC_SC_77C
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 04-May-2012
• Completion Date: 04-May-2012
• Directive: 2004/108/EC - Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 2004/108/EU - DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
• Mandate: M/490 - Standardisation mandate to the European Standardisation Organisations (ESOs) to support European Smart Grid deployment
• Ref Project: SIST EN 61000-4-25:2003/A1:2012 - Electromagnetic compatibility (EMC) - Part 4-25: Testing and measurement techniques - HEMP immunity test methods for equipment and systems

Relations

• Amends: EN 61000-4-25:2002 - Electromagnetic compatibility (EMC) - Part 4-25: Testing and measurement techniques - HEMP immunity test methods for equipment and systems
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61000-4-25:2003/A1:2012
01-julij-2012
Elektromagnetna združljivost - 4-25. del: Preskuševalne in merilne tehnike -
Preskusne metode na odpornost opreme in sistemov proti elektromagnetnim
impulzom z velikih višin (HEMP) - Dopolnilo A1 (IEC 61000-4-25:2001/A1:2012)
Electromagnetic compatibility (EMC) - Part 4-25: Testing and measurement techniques -
HEMP immunity test methods for equipment and systems
Elektromagnetische Verträglichkeit (EMV) - Teil 4-25: Prüf- und Messverfahren - Prüfung
der Störfestigkeit von Einrichtungen und Systemen gegen HEMP-Störgrößen
Compatibilité électromagnétique (CEM) - Partie 4-25: Techniques d'essai et de mesure -
Méthodes d'essai d'immunité à l'IEMN-HA des appareils et des systèmes
Ta slovenski standard je istoveten z: EN 61000-4-25:2002/A1:2012
ICS:
33.100.20 Imunost Immunity
SIST EN 61000-4-25:2003/A1:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61000-4-25:2003/A1:2012

---------------------- Page: 2 ----------------------

SIST EN 61000-4-25:2003/A1:2012

EUROPEAN STANDARD
EN 61000-4-25/A1

NORME EUROPÉENNE
May 2012
EUROPÄISCHE NORM

ICS 33.100.99


English version


Electromagnetic compatibility (EMC) -
Part 4-25: Testing and measurement techniques -
HEMP immunity test methods for equipment and systems
(IEC 61000-4-25:2001/A1:2012)


Compatibilité électromagnétique (CEM) - Elektromagnetische Verträglichkeit (EMV)
Partie 4-25: Techniques d'essai et de -
mesure - Teil 4-25: Prüf- und Messverfahren -
Méthodes d'essai d'immunité à l'IEMN-HA Prüfung der Störfestigkeit von
des appareils et des systèmes Einrichtungen und Systemen gegen
(CEI 61000-4-25:2001/A1:2012) HEMP-Störgrößen
(IEC 61000-4-25:2001/A1:2012)





This amendment A1 modifies the European Standard EN 61000-4-25:2002; it was approved by CENELEC on
2012-04-12. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61000-4-25:2002/A1:2012 E

---------------------- Page: 3 ----------------------

SIST EN 61000-4-25:2003/A1:2012
EN 61000-4-25:2002/A1:2012 - 2 -
Foreword
The text of document 77C/216/FDIS, future edition 1 of IEC 61000-4-25:2001/A1, prepared by SC 77C,
"High power transient phenomena", of IEC TC 77, "Electromagnetic compatibility" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61000-4-25:2002/A1:2012.
The following dates are fixed:
(dop) 2013-01-12
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-04-12

standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.

Endorsement notice
The text of the International Standard IEC 61000-4-25:2001/A1:2012 was approved by CENELEC as a
European Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 61000-4-25:2003/A1:2012
- 3 - EN 61000-4-25:2002/A1:2012
Replace Annex ZA of EN 61000-4-25:2002 by:

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application
...